Used Boring Heads for sale (13,086)

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm Psdpforu Rfhsx Ahvjpp total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Adjustable profile support arms, facilitating positioning and ensuring operator safety. Psdpfx Ahoyw Rx Esvepp Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Psdpfex T Ddyex Ahvjpp Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Pedpfxou Agzxj Ahvepp table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Pjdpfx Ahoywuczovjpp Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi HMI SIP & CIP: Included Infeed conveyors: Included Available: Immediately Pressure Tank: Included Condition: Good

Condition: used, operating hours: 16,301 h, functionality: fully functional, travel distance X-axis: 2,785 mm, travel distance Y-axis: 2,520 mm, travel distance Z-axis: 2,320 mm, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, total height: 5,500 mm, total length: 8,500 mm, total width: 6,000 mm, table length: 2,000 mm, table width: 1,800 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 2,500 m/min, feed rate Z-axis: 3,400 m/min, rotational speed (min.): 5 rpm, rotational speed (max.): 1,000 rpm, spindle mount: MK 5, travel distance W-axis: 770 mm, workpiece weight (max.): 8,000 kg, Union BFT 130 – High-Performance Boring and Milling Machine (used) For sale is a powerful and proven boring and milling machine, type Union BFT 130. This machine stands out for its robust construction and versatile applications in heavy engineering, toolmaking, as well as in both single-part and series production. The BFT 130 is ideally suited for demanding machining of large and heavy workpieces. Thanks to its sturdy design and high-performance spindle, it enables boring, milling, and facing operations—even under heavy loads. Podpfx Ahjywr Egjvepp - Digital readout / CNC control (Heidenhain) - Tool holders - Coolant system - Accessories The machine is in used condition and can be inspected by appointment. It is immediately operational. Fields of application: - Mechanical engineering - Steel construction - Toolmaking - Repair and single-part manufacturing If you are interested or require further information (e.g. precise travel distances, year of manufacture, control system), please do not hesitate to contact us.

Condition: used, Double-head cutting-off machine – Tekna TK 154 Technical specifications: Blade: Ø 500 mm Maximum cutting length: 4000 mm Blade tilt: outward Tilt angle: 90°/22.5 kW Voltage: 380 V Power: 7 HP Dimensions: 5200 x 1650 x H 1700 mm (max 2100 mm) Ppsdpfxexbr Ito Ahvjp Weight: 1260 kg

Condition: used, Set of dual setups on rolling stand. Ppjdpfxec Skirj Ahvsp Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Stand mounted with casters Additional Details Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Condition: excellent (used), Forza Model 71510 - Boring MILLING HEAD FORZA SOLO MANDRINO 85 mm The single spindle milling head is an essential component in machining operations, specifically designed to be the operational core of a milling head. This device is characterized by its robustness and precision, since it is in charge of holding and rotating the cutting tools, such as milling cutters, drills or reamers, without including the chuck or the milling cutter holders. Its design allows for easy adjustment and tool change, which makes it an essential part in any milling process that requires high precision and efficiency. Manufactured with high quality materials, such as hardened steel, the spindle guarantees the stability of the tools during milling operations, minimizing vibrations and ensuring a high quality finish on the parts being machined. Weight: 26.4 Kg FORZA DRILLING CONES Ref. 714140 / 714150 Trailing cones for milling heads are essential components in machining operations that require superior accuracy and stability. These cones are devices that attach to the milling head and serve to secure the workpiece or cutting tool during the milling process. They are made of high-strength materials, such as hardened steel, and designed to withstand the high cutting forces generated during milling. Ppodpfxju Ndl Is Ahvjp CLAMP Diameter: 265 mm Inside diameter from edge to edge : 190 mm Distance between points: 108 mm Diameter of points: 13 mm Rim diameter: 35 mm MILLING HEAD FORCE CLAMPS - 14mm / 10 mm / 7 mm

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. Podpeizxbiefx Ahvepp - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Pjdoh Ryc Hspfx Ahvopp Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: used, DECKEL dividing head for direct and indirect dividing Includes the following equipment: - with tailstock - with draw tube - with 3 division plates Optional: 3-jaw chuck and/or 4-jaw chuck Pjdpfx Ahjywd S Sjvspp

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Suitable for: Ppedpfxjyulfts Ahvsp Row drilling Cabinets Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Vertical: 80 mm Max. clamping height: 92 mm Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Weight approx. 340 kg Availability: short-term Location: Flörsheim

Condition: used, spindle diameter 140 mm x-travel 6000 mm y-travel 2400 mm w-axis . mm ram: horizontal adjustment . mm ram: diameter 300 mm spindle taper ISO 50 turning speeds 3,15-800 U/min rotary table: 2250x2250 mm table travel longitudinal 1600 mm rotary table: 2250x2250 mm table travel longitudinal 1600 mm Optional worktop Optional: 2 Collet boring tables Ppjdpjywcmbjfx Ahvep The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Rotary labelling machine for bottle labelling using two cold glue stations. Manufacturer: KRONES Model: BONAMATIC Year of manufacture: 1994 Capacity: up to 10,000 bottles/h Carousel: 12-station Configuration: 2 x cold glue label heads Operating hours: 31,526 h Original electrical documentation. Ppsdpfx Ahsywciisvop Technical condition: Used machine, condition as shown in the photos.

Condition: excellent (used), Year of construction: 2002, Mayer FH2-3120 Veneer Saw, precision saw with jointing unit (planer unit) and veneer stop table Robust construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and seamless cutting of veneer, including thick veneer cuts Maximum cutting length: 3100mm Saw unit and jointing unit are combined in a single assembly, so only one unit needs to be moved. Easy-to-operate saw unit, runs on linear guides. Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8kW, planing unit 1.0kW Motors can be conveniently switched on at the handle – they only run when needed. Fine-cut saw blade with carbide tips, sharpened Planing head Z4, equipped with new carbide indexable inserts Practical front veneer storage, extendable for the planing unit Extraction connection 100mm with extraction duct Extraction hoses and drive belts renewed Compressed air maintenance unit replaced CE mark Operating manual Onboard tools Ppodpfx Asyug Hrohvsp Original paintwork, only minor touch-ups Dimensions approx. 4350 x 1700 x 1400mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'more offers from this supplier.'

Condition: excellent (used), Year of construction: 1989, Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Psdpfsh Ar Tyjx Ahvspp Number: 1824/1989 Admission: SK 50 Stop surface W x H: 480 x 460 mm Hole spacing W x H: 425 x 415 mm Gear wheel diameter inside / outside: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1.000 mm

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Psdsxd Ruwepfx Ahvjpp Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Longitudinal Travel: 700mm Ppsdpeygk Drjfx Ahvep Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: used, functionality: fully functional, With this offer, you are purchasing a used plotter/large format printer ‘Roland TrueVis SG2-540’. Item for sale: 1 x Roland TrueVis SG2-540 with the following equipment: Includes 2 new print heads before delivery Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally. Psdexwmiwjpfx Ahvspp

Condition: used, - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 Podpfx Aewfpbbshvopp - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine - 21 drilling spindles - 32mm spindle pitch - 380 volts - 2.2 kW - Dimensions: length 1400mm x depth 900mm x height 1300mm Podpjytvarsfx Ahvjpp - 2 pcs longitudinal stops

Condition: like new (used), functionality: fully functional, For sale: very nice double head stitching machine. Brand: Agrafix, type DK 80. Suitable for brochures or blocks. This machine is working 100% and is complete. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: the Netherlands). Ppedpfxsw Ta Hpj Ahvop

Condition: excellent (used), IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm Pjdpfxoytff De Ahvopp TOTAL MACHINE WEIGHT: 20,000 kg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0799134157, Double-head miter saw for PVC and aluminium window profiles. Ppsdpfx Ajyvidqohvep