Used Boring Head for sale (13,901)

Condition: used, clear span: 3,600 mm, load per truss pair (max.): 3,300 kg, Technical data for the pallet racking crossbeam: Racking system: Bito Type: PL 38 Included in the scope of delivery: Kedpfx Ahez Ayxvegenb 1x pallet racking crossbeam, used Material color: green Box profile: 142 x 50 mm Crossbeam type: PT36.142SN Clip: 3 HK (hooks) Clear width: 3,600 mm Design: Head crossbeam Max. load per crossbeam pair: 3,300 kg, with evenly distributed load 2x securing pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Note: 4-5 drill holes in the upper box profile General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,640 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking crossbar: Racking system: Bito Type: PL 38 Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: green Box profile: 127 x 50 mm Agraffe: 3 HK (hooks) Clear width: 2,640 mm Design: Top crossbar Max. load per pair of crossbars: 3,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting Kedpfjz Ayvuex Ahgonb Note: 4-5 drill holes in the upper box profile General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking crossbar: Racking system: Bito Type: PL 38 Included in the scope of supply: 01x Pallet racking crossbar, used Material color: green Box profile: 127 x 50 mm Crossbar type: PT27.127LN Agraffe: 3 HK (hooks) Clear width: 2,700 mm Design: Head crossbar Ksdez Ayphopfx Ahgonb Maximum load per pair of crossbars: 3,000 kg, with evenly distributed load 02x Locking pins, used Design: Fully galvanized For securing the longitudinal beams against unintentional lifting out Note: 4-5 drill holes in the upper box profile General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,705 mm, load per truss pair (max.): 1,200 kg, Technical data for the pallet racking crossbar: Racking system: Arestant Type: AS Included in the scope of delivery: 01x Pallet racking crossbar, used Kodpfxsz Aybdj Ahgsnb Material color: orange Box profile: 80 x 40 mm Agraffe: 4 HK (hooks) Clear width: 2,705 mm Design: Head crossbar Max. load per crossbar pair: 1,200 kg, with evenly distributed load. (Note the field load) 02x Locking pins, used Design: Fully galvanized For securing the longitudinal supports against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), *5-HEAD DRILLING MACHINE CINCINNATI MILACRON PM15* Ref: MILACRON-PM15-5T-0182 - Brand: CINCINNATI MILACRON (Chambost) - Type: PM 15 - 5 heads on a common base - Year: January 1982 - No. 74612 - Power Supply: 380V Three-phase - Capacity: Drilling 15mm / Tapping M10 approx. per head - Table: Long grooved table ∼2.5m with stops - Equipment: 5 independent PM15 column drills, manual / automatic feed - Length of grooved table: 2100 mm x 400 mm - Condition: Complete set, functional, original blue paint - Weight: ∼800 kg for the complete machine Kedpfx Ajz Ax E Iehgjnb Ideal machine for a small-batch workshop, multiple drilling, and finishing before assembly.

Condition: excellent (used), functionality: fully functional, 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm magazine feeding manual regulation of units span rotated heads Knedpfx Ahsz D Ac Rogjb pneumatic top pressure drilling depth regulation

Condition: excellent (used), functionality: fully functional, two bottom heads one side - right head Knodjz D Acwspfx Ahgeb heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min Knjdpez Aun Sjfx Ahgjb control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting Knjdpfxjz Arhve Ahgeb -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3" -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No23 -inch thread: 1/4 - 1 1/2" Knsdpjz Aq Hkjfx Ahgeb -Dimensions: 730/150/H125 mm -Weight: 8.0 kg

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Knjdpfx Ahoz Dt Hyogeb Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: used, Year of construction: 2010, Milling machine, manufacturer Knuth, model UFM 3 Plus. Digital display, numerous accessories included. Knsdpfxez Aff Us Ahgjb

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" Kjdpoz Adz Uefx Ahgenb Mount ISO 40 Overhang 300 mm Centering flange diameter 125 mm Rated drive power 10 HP Max. speed 1800 rpm Milling head dimensions L x W x H approx. 375 x 245 x 300 mm Weight approx. 80 kg Accessories / Special features: • Manual tool clamping • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered interfaces are manufactured according to the "KLINGELBERG" system • The main spindle's roller bearings consist of tapered high-precision rollers • 1 tool clamping screw The spindle and gear bearings have been completely renewed! Design: standard, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping Knedpfxez Adz Ie Ahgjb - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Schmid-Kosta TWS/6 Dividing Head Horizontal/Vertical Quick-Change Dividing Head – Schmid-Kosta Type/Model: TWS/6 Condition: Used Technical Data Center height: 200 mm Clamping surface 1: 200 mm x 250 mm Clamping surface 2: 350 mm x 250 mm Bore: 72 mm Rotary table: Ø 250 mm Knjdpfxszw H Iyj Ahgob Weight: approx. 60 kg

Condition: used, Wohlhaupter Alu-Line ø 350 - 430 mm boring tool incl. SK 50 holder Ksdpfx Aswxw Hlshgenb

Condition: used, Wohlhaupter Alu-Line ø 425 - 505 mm boring tool including SK 50 holder Kedpfx Aswxw Icjhgjnb

Condition: used, Sub-assembly Sandvik Kosta Condition: Used Technical data: Center height: 200 mm Chuck diameter: Ø 250 mm Mounting surface 1: 305 x 250 mm Knedpfozw H Rbsx Ahgeb Mounting surface 2: 200 x 250 mm Weight: approx. 62 kg Scope of delivery: see images Inquiry item: Transport costs will be provided in an individual offer.

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C Kjdpjvyg A Tjfx Ahgenb with tools over: ø 12 mm without collets

Condition: used, Wohlhaupter Alu-Line Ø 200 - 280 mm boring tool Knedswxw D Rjpfx Ahgob

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt). Kedez Dk Nljpfx Ahgsnb

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine with extensive accessories! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine/fixture drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.00. It is worth noting that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, where the highest precision is required. It is also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Knjdpfx Ajzuvwlohgjb Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine, as is customary with used machines, is made in full before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without transshipment) within the EU is possible. Price net export within the EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc., up to 1700 km travel distance, approx. 1100 - 1450 EUR.

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. Knsdey Encwjpfx Ahgjb 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal boring machine TOS WHN 13.8 CNC Control system: Heidenhain 530 Spindle diameter: 130 mm Working table: 1800 x 2500 mm Working spindle taper: ISO 50 Spindle speed: 10-3000 rpm Working spindle extension: W-800 mm Vertical spindle adjustment: Y-2500 mm Transverse table adjustment: X-4000 mm Longitudinal stand adjustment: Z-1600 mm Feed range X, Y, Z, W: 4-3000 mm/min Ksdpsz Dizyofx Ahgsnb Table load: 20 t Power consumption: 82 kW

Condition: excellent (used), functionality: fully functional, Machine specifications: Table size: 1,800 × 1,800 mm X-axis travel: 3,500 mm Y-axis travel: 2,147 mm measured from the machine table Knjdez Dh Ixspfx Ahgeb Y-axis clearance: Reaches 70 mm below the table edge Z-axis travel: 3,236 mm W-axis travel: 800 mm Maximum workpiece weight: 25,000 kg Maximum spindle speed: 2,500 rpm CNC control/software: Siemens EdgeCAM can also be used Machine table rotation: 360°