Used Bone Separator for sale (5,983)

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Ijdpfx Ahex Aurkevotd

Condition: ready for operation (used), Cheap separator without control cabinet requires new belt Itjdpjwl N Hqjfx Ahvjd

Year of construction: 2018, condition: new, functionality: unexamined, – For removing foreign matter from municipal and industrial sludge and from process water – Continuous screening, dewatering, and discharge of foreign matter in a single operation - Compressor for compressed air generation - Electrical technology, Strainpress control and switchgear panel Process data: - Sludge type: digestate from wet anaerobic digestion of biowaste - Sludge quantity: expected 8–10 m³/h - Solids content in feed (average/max): 4–6% DS (dry solids) Itjdpsyvhr Hsfx Ahvjd - Screen/slot size for preliminary screening: 12 mm Performance data: - Number of machines: 1 (1 in operation/0 standby) - Throughput per machine: expected 8–10 m³/h - Solid throughput per machine: 4–6% DS

Condition: used, Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Suction side: 400 mm Height: 5853 mm Diameter: 1695 mm Year: 2013 Itedpfx Ahsytx Dtovod

Year of construction: 2011, condition: used, Condition: used Location: external storage Type: MRPX 810CA-SK Year of manufacture: 2010 Max. bowl speed: 6,250 rpm Motor speed: 1,500 rpm Internal bowl diameter: 438 mm Min./Max. process temperature: 0 / 100°C Itodjyr I Raopfx Ahvod The separator is offered without the "bowl"; this can be purchased separately from Alfa Laval for €60,000. The separator is in as-new condition and has zero operating hours. Full documentation is available. Product data Overall height: 2,005 mm Overall length: 2,450 mm Overall width: 1,305 mm Remarks The fully hermetic separation system MRPX 810 is designed for the removal of suspended solids with particle sizes from approximately 0.5 to 500 μm from a liquid phase with lower density than the solids. The solids content is typically in the range of 0.1–20 vol.-%. The main applications are bacteria, rDNA products, enzymes, cell cultures, and vaccines. It is also suitable for industrial fermentation processes using microbial cells for the production of acids, chemicals, fuels, etc. Applications requiring low oxygen uptake can also benefit from the hermetic design features of the MRPX 810 separator.

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Itedpeyr Ic Njfx Ahvod Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge

Condition: used, all stainless steel for product up to 530 x 530 mm Dimension: (L x W x H): 950 x 1.450 x 1.900 mm Iodpeyr Ew Dofx Ahvetd 3 x 380V, 50Hz, 22kW

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Itsdpsyupynofx Ahvod

Condition: good (used), Year of construction: 1996, functionality: fully functional, overall weight: 70 kg, Manufacturer: MTF Technik Model: PZ 257 B Itjdpfx Aeyt E Tbshvsd Roller length: 74 cm Drum width: 40 cm Adjustable height Adjustable speed

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Itsdpjyn Rmisfx Ahvsd Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: Ijdpfx Ahjyn Rkuevetd 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: excellent (used), Year of construction: 2018, Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Iedpfx Ahoynau Aovjtd Working hours: 1465 hours With hopper and tamping device

Year of construction: 2012, condition: used, functionality: fully functional, For sale are 3 ballistic separators from the company Hartner. Iedpfoyrnguex Ahvetd The price is per unit. Two of them are currently still integrated in our production and can be inspected on site. The dismantling is planned for around early June 2026. All technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us.

Year of construction: 2016, condition: used, The metal separator, 3 units, from Sesotec, is available for sale. Our GF metal detectors for pneumatic applications provide optimal protection against production downtime, stoppages, and customer complaints. Itjdpfxsyrl Nyj Ahvjd Suitable for steel, copper, non-ferrous metals, and stainless steel.

Condition: used, Manufacturer: Mineralwerke Itsdpfeh D Hmvjx Ahvjd Type: PZ 250 M4 Voltage: 380 V Output: 55 kW Weight: 1950 kg

Condition: used, Year of construction: 2015, No. 10033 Wet drum magnetic separator Steinert WDS 92 92 (without CE package) Used, year of construction 2015 According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Without CE package Highly efficient recovery of FeSi or magnetite from float-sink separation and wet processing of fines The Steinert WDS is particularly popular in the processing of heavy sludge or iron ore with grain sizes between 1 µm and 3 mm. In the regeneration of heavy beet, the wet drum magnetic separator essentially ensures the recovery of magnetite or ferrosilicon (FeSi). High field strengths are achieved through the use of powerful magnets made of neodymium-iron-boron and the special design of the magnet packs, making high separation rates of over 99 % possible. Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price Isdpfx Ahoyl Sqwovotd To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Itodpsglvwgjfx Ahvod Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Itedovmxvfjpfx Ahved Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Itodpfxodzqn Us Ahved Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Itjdpjhlnznefx Ahvsd Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Itsdsyk E T Njpfx Ahvjd Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2014 Isdpfxjyku E Uj Ahvstd Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Year of construction: 2020, operating hours: 12,500 h, condition: excellent (used), functionality: fully functional, Hello, For sale: X-ray separator by TOMRA. The device is 100% operational, having undergone a full inspection by the manufacturer, who issued a certificate confirming its complete readiness for operation. This separator is designed for precise material sorting based on density and internal structure using X-ray technology (XRT). Main applications: Itodpfx Ahoym Sg Ujvod - Separation of metals from non-metallic fractions (e.g. plastics, rubber, wood, glass) - Sorting aluminium into specific alloy types - Separation of light and heavy metals (e.g. aluminium from heavy metals) - Recovery of metals from shredded scrap - Sorting of scrap from end-of-life vehicles - Removal of contaminants from metal fractions This equipment is ideal for metal recycling facilities, providing high separation efficiency and increasing the value of recovered material.

Condition: new, Year of construction: 2026, Magnetic Separator – Industrial Solution for Continuous Coolant Cleaning A magnetic separator is an industrial device designed for the continuous removal of ferromagnetic particles from coolant and oil-based fluids generated during machining processes. Thanks to automatic, continuous operation, it effectively removes chips and fine metal particles from the flowing medium, reducing machine wear and minimizing downtime related to coolant replacement or filtration. Magnetic Separator – Key Benefits in Maintaining Coolant Cleanliness Design and Operating Technology The separator is designed to mechanically and maintenance-free separate metallic contaminants from the process medium. The core working component is a magnetic drum made of stainless steel which, while rotating, attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working zone. The discharge of collected particles is handled by a shaft system consisting of: Magnetic shaft – responsible for capturing and holding metal particles during the separation process Rubber-coated pressure shaft – stabilizes the removal of contaminants and supports their transfer to the waste container The separator’s construction also includes a tank that ensures controlled flow of the medium through the separation zone. This design allows the unit to operate continuously and repeatedly remove contaminants without operator intervention. Precision and Efficiency in the Production Environment A processing capacity of up to 25 l/min enables efficient operation in standard coolant systems commonly used in production halls. Magnetic separation reduces the presence of metal particles in circulation, resulting in: improved stability of cooling and lubrication parameters, reduced risk of surface scratching and deterioration of machining quality, extended service life of the coolant and circulation system components, greater process reliability in continuous production operations. Applications of the Magnetic Separator The magnetic separator is used wherever ferromagnetic metal particles and chips are generated in cooling and lubricating media. It is particularly recommended for: production halls and CNC workshops, machining production lines, grinding stations using water- or oil-based coolants, coolant circulation systems requiring continuous cleaning. Standard Equipment Magnetic separator with stainless steel magnetic drum Rubber-coated pressure shaft Itjdpfxjycc Rpe Ahvsd Working tank Electric drive Optional Equipment Waste container adapted to the production workstation Connection extensions for integration with existing coolant systems Technical Specifications Pressure shaft width (rubber-coated): 140 mm Pressure shaft diameter (rubber-coated): 65 mm Magnetic shaft width: 140 mm Magnetic shaft diameter: 110 mm Inlet connection: 50 mm Outlet diameter: 53 mm Motor power: 0.25 kW Capacity: up to 25 l/min Weight: 35 kg

Year of construction: 2022, operating hours: 3,200 h, condition: like new (used), functionality: fully functional, working width: 2,000 mm, machine/vehicle number: CCB10003, As-new Pellenc 2000 compact near-infrared sorting unit including acceleration belt and expansion hood with separation edge in very good condition. Itjdpfoyml A Njx Ahved