Used Bmo Automation for sale (11,237)

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00560, load capacity: 100 kg, arm reach: 2,230 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-1000iA/100F manufactured in 2015.01. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Godpfx Agsx U Dq Njbstt Model: R-1000iA/100F Model Number: A05B-1330-B205 Year of Manufacture Robot: 2015.01 Warranty term (months): 12   Payload (kg): 100 Reach (mm): 2230 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 665   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2014.12 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12  

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 Gtodpfxjx U Dp Es Agbet • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 • Robot: Viper 12

Condition: used, Year of construction: 2017, Industrial Robot Manufacturer: Kuka Model: KR20-3 Year of manufacture: 2017 Operating hours: 8,700 Reach: 1,611 mm Weight: 254 kg Payload: 20 kg Kuka Controller KRC4 Weight: 145 kg Software version: V8.5.4 Interface: X11 Interface: Beckhoff EtherCat Module Gtedpfxsx U Dads Agbst Kuka touch panel Kuka connection cables

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 Gtjdpfx Aepxri Usgbjt volt 380 V frequency 50 Hz weight of the machine ca. 500 t

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR240 R2900 ultra KRC4, load capacity: 240 kg, arm reach: 2,896 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Gedpfx Agex Uzmujbett Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR240 R2900 ultra Controller: KRC4 Rated Payload: 270 kg Reach: 2696 mm General purpose: KR QUANTEC robots are all-rounders for a wide variety of customized applications. They also have the most compact dimensions in their class – and the greatest power density. Delivery time: By mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is the delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Est. 2002. We ship worldwide.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany Gjdex Uyzqjpfx Agbstt 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00561, load capacity: 100 kg, arm reach: 2,230 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-1000iA/100F manufactured in 2016.01. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-1000iA/100F Model Number: A05B-1330-B205 Year of Manufacture Robot: 2016.01 Warranty term (months): 12   Payload (kg): 100 Reach (mm): 2230 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Gtjdpfx Agjx U Dqpjbjt Installation Type: Floor, Upside-down Mount Weight (kg): 665   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.12 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12  

Condition: ready for operation (used), Year of construction: 2018, This 6-axis ABB IRB 4400 robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision in a variety of industrial applications. Consider the opportunity to buy this ABB IRB 4400 robot arm. Contact us for more information. Gedpjx Uzqmsfx Agbett

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Godsx Uw Stopfx Agbott Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: used, Year of construction: 2015, current capacity . kVA number of controlled axis . Gtodpfxjudc Tke Agbjt workpiece weight . kg 5

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzbs06, Equipment: CE marking, This product is suitable to make aluminum foil film package, including condom and patch. It is also used for packing other products. The patch packing machine is manually operated and suitable for small-scale production. It is equipped with an automatic oil dripping device, which can effectively prevent the package from being damaged. Gjdpfxox S Dime Agbott

Condition: used, 2K Adhesive System, 2-Component Dispensing System with Hand Applicator for 2-Component Adhesives Mayer & Mayer Type MMR R2020R VLOOP DG 2:1 PUB Serial No. 2021-001 Year of manufacture: 2021 VLOOP = Very LOw OutPut versions, approx. 30 – 210 ml/min Mix ratio: 2:1 (adjustable) Container size: Standard, 20 liter bucket Air pressure: 6 – 8 bar Air consumption: 80 –100 m³/h Power supply: 230V, 50 Hz - No open containers - Fully pneumatic drive - Continuous, precise mixing - Chain-driven gerotor metering pumps - Easy ratio adjustment - Compact and easy to handle Gjdpsx Urb Aofx Agbjtt - Simple operation and maintenance - All components/fittings made of stainless steel - Stainless steel transfer pumps - Stainless steel gear pumps - Double piston rams - Mobile aluminum profile unit on wheels - 8 meter hose package consisting of a 5 meter supply hose and 3 meter flexible whip hose lines - Includes GSMFG G200X-GUN (hand applicator) - Boom arm device for easier hose guidance - Operating manual - Approx. 130 mixer tips (F-System) included All installed parts are sourced from reputable, high-quality suppliers such as Ingersoll Rand, Parker, VSE, Zenith, and others. Dimensions (W x H x D): 800 x 2000 x 2700 mm Weight: 332 kg Currently used silicone adhesive: Component (A) LOCTITE SI 5610 A (container empty) Component (B) LOCTITE SI 5610 B (container half full) The MM large dispensing systems are specifically optimized for the use of structural MMA adhesives from EBS, LLC, featuring a robust, durable, and maintenance-friendly design to ensure long-term, trouble-free, and consistent adhesive application. The system can be modified for dispensing a wide range of two-component adhesives such as polyurethanes, epoxies, methyl methacrylates, and others. BASIC FUNCTIONAL OVERVIEW: A pneumatically driven motor, powered solely by compressed air, drives the adhesive and activator gear pumps (= metering pumps) via a chain drive system. These metering pumps are continuously supplied by adhesive and activator transfer pumps, which are also air driven. This way, components A and B are kept separate but are pumped in the pre-set ratio through separate hose sets to a dispensing gun, where they are mixed at the gun outlet by a static mixer nozzle. As a result, the entire dispensing system requires little to no cleaning. The flow rate, which controls the dispensing speed, can be adjusted via the speed of the pneumatic drive motor.

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00527, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.11. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.11 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560 Gtedpfxsx Uzx Re Agbot   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque Gtodpfx Agox Enknsbet • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR270 R2700 Ultra KRC4, load capacity: 270 kg, arm reach: 2,696 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR270 R2700 Ultra Controller: KRC4 Rated Payload: 270 kg Reach: 2696 mm General purpose: KR QUANTEC robots are all-rounders for a wide range of customized applications. They also have the most compact dimensions in their class – and the highest power density. Delivery time: By mutual agreement. Gtodpfxex Uq Nxs Agbot IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About us: Our daily trustworthy business is the delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Est. 2002. We ship worldwide.

Condition: used, Year of construction: 2000, Siemens 840 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gtsdpfx Agsg Sn Egsbjt Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2010, Kuka KR 16-2 Godpfx Asx Uqclogbstt Year of manufacture: 2010 Payload: 16 kg Reach: 1611 mm Control: KRC2ED05

Condition: used, functionality: fully functional, mileage: 381,597 km, power: 338 kW (459.55 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Gtodex Upzgepfx Agbst

Condition: excellent (used), Model: KR 70 R2100/SEL Year of manufacture: 2023 Gtsdpfox Upl Eex Agbst Axes: 6 Reach: 2101 mm Payload: 70 kg Maximum payload: up to 85 kg Repeatability (ISO 9283): ±0.05 mm Weight: 536 kg Control: KUKA KR C4 or KR C5

Condition: ready for operation (used), Year of construction: 2018, This DENSO RC8A was manufactured in 2018. It features a robotic cell with two SCARA robots, each capable of a maximum reach of 550 mm and a Z-axis stroke of 320 mm. The system includes a controller RC8A, offline programming software, and self-diagnostic functions. Ideal for applications requiring high-speed robotic manipulation. Contact us for more information about this machine. • Motion & Control: • Point-to-point control system • Linear and circular movement in 3 dimensions • Memory Capacity: • Variables memory: 1.75 MB (approx. 65000 points) • Program memory: 400 MB • Up to 256 programs • 5000 instructions per program • I/O Signals: • Inputs: • 8 user inputs at robot wrist (Hand I/O) • 8 user inputs at controller (Mini I/O) Gjdpfx Asx Uty Hegbott • 8 system inputs • Outputs: • 8 user outputs at robot wrist (Hand I/O) • 7 user outputs at controller (Mini I/O) • 8 system outputs • Communication Interfaces: • 1 × RS-232C • Gigabit Ethernet • 2 × USB • Additional Features: • Self-diagnostic functions • Operating conditions: • Temperature: 0–40 °C • Humidity: ≤ 90% RH • Controller Dimensions & Weight: • Standard RC8A: 357 × 320 × 94 mm • RC8A with Safety Motion: 411 × 320 × 94 mm • Volume: 12.4 liters • Weight: 12 kg • Cables: • Power cable: 5 m • I/O cable: 8 m (optional) • Teaching Pendant: • Quantity: 1 unit (for both robots) • Cable length: 4 m (optional 8 m / 12 m) • Display: • 7.5" TFT LCD touchscreen • Resolution: 640 × 480 pixels • Power supply: 24 V • Protection class: IP65 (dust & splash resistant) • Dimensions: 290 × 198 × 80 mm • Weight: approx. 1 kg • Functions: • Program creation and editing • Parameter configuration • Robot jogging and motion control • Program start • Teaching and verification mode • I/O management • Communication setup • Error displayRobots • Quantity: 2 units • Type: SCARA • Mechanical Characteristics: • Maximum reach: 550 mm • Z-axis stroke: 320 mm • Repeatability (J1 + J2): ±0.012 mm • Repeatability (Z-axis): ±0.01 mm • Repeatability (T-axis): ±0.004° • Payload capacity (wrist): 8 kgSpeed • Maximum composite speed: 8780 mm/sec • Z-axis speed: 2760 mm/sec • T-axis speed: 220°/secRobot Arm Connections • Pneumatic connections: • 4 air tubes, Ø 6 mm • Electrical signals: • 24 signals via connectorRobot Features • Offline programming software • Absolute encoders • Sealed AC servo motors, brushless and maintenance-free • Power supply: Single-phase or three-phase 230 VAdditional Equipment • 2 gripping devices with sensors for detecting picked quantity • 1 electrical control cabinet interfacing the entire systemMachine History • Functional Description: The robotic cell was originally designed to feed a cutlery packaging machine. The system picked stacked forks from dedicated crates and transferred them onto a packaging conveyor at a loading speed of 100 pieces per minute. While the two SCARA robots were operating correctly, the crate exchange system (empty vs. full crates) was not optimally designed. For this reason, the robotic cell was eventually decommissioned. A short video of the robot in operation is available.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: IRB360-8/1130 IRC5 Flexpicker, overall weight: 120 kg, load capacity: 8 kg, arm reach: 1,130 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: IRC5, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation, performed by our in-house robotics engineers. ABB’s IRB 360 series, commonly known as the FlexPicker, is engineered for the fastest picking applications and is optimized for packing tasks. This robot offers exceptional motion performance, with industry-leading cycle times, precise accuracy, and high payload capabilities. Gtedpfx Aox Uqrtegbst Brand: ABB Model: IRB360-8/1130 IRC5 Flexpicker Controller: IRC5 Payload: 8 kg Reach: 1130 mm Application: Inverted installation. Standard Flexpicker/Deltapicker configuration Robot weight: approx. 1400 kg IRS Robotics® Refurbished: 77-Point Protocol – extensively tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, and repainted in your preferred RAL colour. About: We are a trusted specialist in the daily supply of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. We ship worldwide.

Condition: used, Year of construction: 1990, control Bedienpanel Heidenhain TNC 131 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gtsdpfx Asg Si Scjgbst Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Gjdpfx Aex Upf Sjgbstt Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Mounting: on aluminium frame 5) Welding Lathe Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding 6) Heavy Duty Work Table Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR90 R3100 Extra KRC4, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR90 R3100 Extra Controller: KRC4 Rated Payload: 90 kg Reach: 3095 mm General purpose: Versatile, streamlined, powerful and robust – those are the typical characteristics of the KR QUANTEC series, the best-selling robot series from KUKA. Delivery time: In mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) Gedpfx Agsx Uqi Sebott About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Est. 2002. We ship worldwide.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: R-1000iA/100F R-30iB, load capacity: 100 kg, arm reach: 2,230 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: R-1000iA/100F Controller: R-30iB General purpose: The R-1000𝑖A/100F is a powerful 6-axis robot designed for versatility and precision. Engineered for speed, it delivers outstanding cycle times. Payload: 100 kg Godpfxsx Up N Do Agbstt Reach: 2230 mm Robot mass: 665 kg Delivery time: In mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – YASKAWA. Est. 2002. We ship worldwide.