Used Bimak Drill for sale (4,886)

Condition: good (used), Nagel Citoborma 111 Paper Drill Lodpeyur E Hjfx Ahvohd This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany.

Condition: new, Year of construction: 2026, WEGOMA KF131F - Copy Router with Tripple drill Lhedpfxoywcrqo Ahvjd New machines. Аvailable.

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Lhsdpfx Ajymw I Djhved Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Lsdpfx Ahshzbipjvshd Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots Lhjdpfx Ahjyuqmievsd • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Lodpfx Ahsxd Ruwevshd Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: used, Number of rows 12 0 Ljdjyv Ixmjpfx Ahvohd distance between row 45 cm Working with 5,4 m

Condition: used, Number of rows 4 0 Lhsdpfoyv Ivxjx Ahvsd distance between row 75 cm Working with 3 m

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! Ledsyv A A Hjpfx Ahvshd TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: good (used), Year of construction: 2001, Drilling capacity: 40 mm Spindle taper: MK 4 Arm reach: 300 - 1300 mm Lhodpeyud Tvefx Ahvod Weight approx.: 2300 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for precise hole positioning and a switch for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine features a water tank and water pump. Ljdpfx Aoyghh Uohvjhd

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Ljdpfx Aheyvz Tdovohd Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm Lhsdpfxeyvz Nre Ahvod - Including 6 plates measuring 5600 mm x 1850 mm

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Ljdpfjyucc Asx Ahvjhd Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm Lsdsyuccpspfx Ahvshd T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Lhodpfx Asyucahshvsd Available immediately from stock.

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Lhsdpfx Aeyub Spjhved Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Installation height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Lhjdpfsyvzb Ijx Ahvjd Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Lhedsyvy A Rspfx Ahvsd Machine weight approx.: 4.6 t

Condition: used, Year of construction: 2022, operating hours: 220 h, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 100 A, We are offering this used Voortman V631 & VB1050 automated drilling and sawing line, year of manufacture 2022, with only 220 operating hours. This offer is based on the following system configuration: Sawing and drilling line VB1050 & V631M (system 20210262), consisting of: 4×5 m cross conveyor (infeed) – 16 m roller conveyor (infeed) Sawing unit VB1050 – Drilling unit V631M – Chip conveyor – Underside marking unit – 16 m roller conveyor (outfeed) – 4×5 m cross conveyor (outfeed) Lhedpfxeyvviyj Ahved Safety devices If you have any questions or need more information, please send us a message or give us a call.

Condition: used, functionality: fully functional, BOHLER BPI 113 VERTICAL DRILLING RIG Lhedpfxsyvu H De Ahved 7,600 hours of operation Ilmeg HSL900A dust collector Good condition Available immediately WE EVALUATE TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout Financial information VAT: The price shown is exclusive of VAT Ledpfx Ahswfpbbevjhd VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) Lodpefx U D Aofx Ahvshd - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, bore capacity in steel (diameter):23 mm throat:280 mm bore stroke:220 mm Speed:1420 U/min. Lhsdpscxxyyefx Ahved feed:0,1 - 0,3 m/min voltage:380 V workpiece height max.:950 mm surface area:500 x 500 mm machined bearing plate::Ja column diameter:140 mm table swivable ca.:180° total power requirement:1,1 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:1,4 x 0,6 x 2,05 m

Condition: used, Year of construction: 1981, Working width 1200 mm Power (kW) 6 kW Working depth 130 mm Thickness 50 mm Radial drilling machine, radial drilling machine Manufacturer: MAS Kovosit Lhsdpfxswnhcio Ahvsd Type: VO 50 Arm length: 1600mm Drill length: 1200mm Drill depth: 130mm Capacity: 50 / 60mm Spindle speed: 28-2500 rpm Intake: MK6 Motor power: 6kW T-slot bottom: 1500x1000mm Machine-afmeting: 2900x1200x3000mm - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 50 / 1600 - Power [kW]: 6 - Arm length [mm]: 1600 - Drilling depth [mm]: 130 - Drilling capacity [mm]: 60 - Tool holder: MK6 - Min. spindle speed [rpm]: 28 - Max. spindle speed [rpm]: 2500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum