Used Bft for sale (45)

Condition: used, Year of construction: 1974, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min Ncodpfx Ahstv Ibdovsp table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without facing plate, without steady rest,

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm Ncedow Rn R Rjpfx Ahvjp - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Year of construction: 2006, condition: good (used), BF Tec milling machine Type: 7550C Ncjdpsncbndofx Ahvep X-travel: 500 mm Y-travel: 300 mm Z-travel: 350 mm Bed: 240 x 800 mm Speed: 1750 RPM Spindle: ISO 40 Year: 2006 Digital measurement Jenix Dimensions: 125x125x200 cm LxWxH

Year of construction: 2021, condition: as good as new (ex-display), Max. drilling diameter 50 mm Max. travel of spindle 315 mm Max. distance from spindle axis and column 1600 mm Min. distance from spindle axis and column 350 mm Max. distance from spindle nose to surface of base worktable 1220 mm Min. distance from spindle nose to surface of base worktable 320 mm Spindle taper MT 5# Nedpfx Aeh H Edishvecp Spindle speed steps 16 step Spindle speed range 25~2000 r.p.m. Spindle feed steps 16 step Spindle feed range 0.04~3.2 mm/r Dimension of worktable 500x630 mm Arm length 2140 mm Power of main motor 4 Kw Machine dimension 2500x1060x2655 mm Net. Weight 3.50 Ton

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Nesting machining center with automatic loading and unloading X working range: approx. 4300 mm Y working range: approx. 2205 mm 5-axis operating unit, 13 kW power, HSK F63 tool holder, liquid-cooled Vertical drilling spindles: 18 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Circular saw blade in X direction 1-position tool magazine on X-axis carriage for a 350 mm diameter saw blade or a deflector 300 mm diameter saw blade for tool holder cone with integrated flange 8-position revolver tool changer Worktable: Nesting FT Software: bSolid Nedpoyw S A Eefx Ahvscp Automatic loading system with side-mounted scissor lift table Automatic Label Printing and Application System with 0-90° rotation for adhesive barcode labels at the loading station Automatic unloading system with motorized conveyor belt Automatic Loading and Unloading System with CNC positioning (Sweeping Arm + Suction Cups for loading) Front safety protection system with mats and perimeter guards Cooling unit for coolant Automatic lubrication system Air conditioning system for electrical cabinet Vacuum pump, 250 m3/h

Condition: used, New: No Ncjdpfoytfdmjx Ahvop Part suitable for: trucks Price: On request VAT/margin scheme: VAT deductible Type number: 2232841

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball. Nodpfjwl H Nisx Ahvecp

Condition: excellent (used), Year of construction: 2015, Working range X 6,400 mm Working range Y 1,500 mm Working range Z 1,500 mm Number of milling spindles 1 Main motor Kw 13 kW Max rotation speed 24,000 rpm Tool fixing system HSK-F63 Tool change positions 8 Vertical drilling heads 20 Ncjdowlcqvjpfx Ahvjp Horizontal drilling tips X 4 Horizontal drilling tips Y 4 N.2 vacuum pumps of 360 m³/h Nesting Remote control BIESSE WORKS software Overall dimensions: 11004×5334 mm Weight 4900 kg

Condition: good (used), Support bearings for Union Boring mills BFT80 and BFT 80/2 with fixed face support Nsdpfx Ahjcw Sthovscp -short version -for spindle diameter 80mm

Condition: good (used), Support bearings suitable for Union boring mills BFT80/3 and BFT 90/3 and BFT90/5 -short version Ncsdpfxscw St Se Ahvjp -for spindle diameter 90mm

Condition: excellent (used), Support bearings suitable for Union Boring mills BFT80/3 and BFT 90/3 and BFT90/5 -long version Nodpscxa A Asfx Ahvscp -for spindle diameter 90mm -for spindle diameter 102mm on request

Condition: ready for operation (used), Heidenhain BC 110BF TFT monitor unit. 374 964-01 SN:24807913A, used, normal signs of wear, 100% functional, scope of delivery as per photos Nedei Eagaepfx Ahvscp

Condition: used, mileage: 599,000 km, power: 240 kW (326.31 HP), first registration: 05/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,010 mm, total width: 2,500 mm, Year of construction: 2015, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, traction control, Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 90%; Tyre profile right: 90%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Suspension: air suspension Number of cylinders: 6 Engine capacity: 10.677 cc Empty weight: 6.852 kg Carrying capacity: 12.148 kg GVW: 19.000 kg Registration number: 39-BFT-2 = Additional options and accessories = - Aluminium fuel tank - Heavy duty engine brake - Outside temperature display - Radio/CD player - Visor Ncjdpfx Aheyfhgnovjp = Remarks = Aluminium fueltank 390 Liter

Condition: excellent (used), Year of construction: 2016, operating hours: 2,133 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, table length: 4,000 mm, pump pressure: 4,000 bar, INTERMAC Primus 184 Metalworking machine, 3 axes, 4000 x 2000 mm (4000 x 1860 mm effective cutting area), year 2016. Operating hours: 2133. PC upgraded in 2022 with SSD replacing the hard drive. Maintenance performed as per schedule, plus seal/gasket and BFT pump replacement by BFT technician in 2022 (not recorded in the list). Machine is fully operational, and video of the machine in operation can be provided. The machine can be inspected at our client’s facility in the Veneto area. Njdpsyvh Afefx Ahvecp

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump Nedpfx Aex Ig Sishvocp - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Nodsvla U Topfx Ahvscp Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head * Nedpfx Aju Nlgyohvecp

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control Ncodpfx Aog N Nlvshvjp "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting machine Perndorfer type WSS4020, table size 4000/2000 mm, BFT high-pressure pump with 37 kW and 4000 bar cutting pressure, 3-D cutting head for contour cutting. The machine is used and in good condition; an overhaul by the manufacturer was carried out recently. The machine can be inspected and tested at any time. Nsdox H Ny Tepfx Ahvocp

Condition: used, mileage: 914,000 km, power: 340 kW (462.27 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,195 l, brakes: intarder, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: AdBlue, EBS, air conditioning, cruise control, differential lock, fridge, second fuel tank, = Additional options and accessories = Ncsdpeuu Dy Uofx Ahvep - Air conditioning - Sun visor = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Gearbox: 12A2330, 12 gears, automatic Axle configuration Brakes: disc brakes Front axle: Max. axle load: 8,000 kg; Steering; Axle make: 163N; Suspension: parabolic spring Rear axle: twin tires; differential lock; Max. axle load: 11,500 kg; Axle make: 1344; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,572 kg Payload: 11,928 kg Gross vehicle weight: 20,500 kg Functional Superstructure make: ZF Identification Registration: 06-BFT-3 Further information Please contact Maurits Van Giessen for more information.