Used Berlin for sale (2,447)

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Rjdpfjruq Dfsx Amyjcd

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment Rcjdpezqt Dnsfx Amyjd • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, functionality: fully functional, fuel type: diesel, operation weight: 15,450 kg, Year of construction: 2023, operating hours: 790 h, Hyundai HX145ALCR – Technical Data & Equipment Machine: Hyundai HX145ALCR Year of Manufacture: 2023 Engine Power: 100 kW (136 hp) ## Engine * Cummins F3.8 Diesel Engine * 100 kW (136 hp) at 2,200 rpm Rcsdpszqq Nhsfx Amysd * Automatic Idling System * Automatic Engine Shutdown * Engine Emergency Stop Switch * Fuel Pre-filter * Fuel Pre-heater * Electric Fuel Filling Pump * Turbo II Cyclone Air Filter * Self-diagnosis System ## Hydraulic System * EPIC (Electric Pump Independent Control) * 3 Power Modes * 2 Work Modes * User Mode * Variable Power Control * Flow Control for Attachments * Double-Acting Hydraulic Lines (Grapple/Hydraulic Hammer) * Proportional Lines for Swing Function * Lines for Quick Coupler * Bucket/Grapple Changeover (3-Way Valve) * Accumulator for Lowering Work Equipment * Hydraulic Oil VG46 ## Cabin & Comfort * All-weather Steel Cabin with 360° Panoramic View * ROPS certified according to ISO 12117-2 * 7 mm Tempered Safety Glass * Front Windshield as Sliding Window * Left Sliding Window * Rain Shield on Front Windshield * Transparent Roof Hatch * Sun Visor * Lockable Door * Door and Cabin Locks (Single-Key System) * Air-Suspended, Heated Driver Seat * Height-Adjustable Control Console * Pilot-operated, Proportional Joysticks (Kawasaki + EPIC) * Air Conditioning * Heater * Defroster * Intake Air Pre-heater for Cold Starts * Radio with USB * Hands-free Mobile Phone System * 12-Volt Power Outlet * Storage Compartment * Cabin Lighting * Electric Horn ## Display & Driver Information * 8" LCD Color Display * ECO Indicator * Engine Speed * Travel Mode (Slow/Fast) * Maximum Power Indicator * Coolant Temperature * Hydraulic Oil Temperature * Fuel Level * Clock * Trip Meter * Overload Warning * Engine Warning * Air Filter Warning Indicator * Communication Error Indicator * Battery Warning ## Safety * Rearview Camera * Right-side Camera * Three Exterior Mirrors * Automatic Safety Lock * Seatbelt Warning * Battery Main Switch * Driving Alarm * Automatic Swing Brake * Lift Mode * Boom Holding System * Stick Holding System * Safety Valves for: * Boom Cylinder * Stick Cylinder * Blade Cylinder * Safety Valve with Overload Warning Device ## Lighting * LED Work Lights on Cabin * LED Work Lights on Boom * Four Work Lights at Front * 2 on Boom * 2 on Front Frame ## Boom & Work Equipment * 4.90 m Variable Boom * 2.50 m Stick * Bucket Linkage * Boom Safety Valves * Stick Safety Valve ## Undercarriage * Blade Mounting * Blade at Front * Rear Counterweight 2,800 kg * Road-Liner Rubber Tracks 500 mm (43 Links) * Long Track Guards * Triple-Gusset Bottom Plates 600 mm * Track Guard * Standard Undercarriage Protection Electrical System 2 × 12 V / 100 Ah Batteries Battery Main Switch Additional Equipment Beka Central Lubrication System Standard Protective Rails Special Equipment Features Variable Boom 4.90 m Air-Suspended and Heated Driver Seat Proportional Auxiliary Hydraulics for Hammer, Grapple, and Rotator Quick Coupler Lines Rear and Side Cameras LED Work Lights Beka Central Lubrication System Hi-MATE Telematics with 5-Year Subscription Road-Liner Rubber Tracks Blade at Front

Condition: used, mileage: 144,000 km, power: 84 kW (114.21 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 1,879 kg, overall weight: 2,800 kg, axle configuration: 4x2, fuel: diesel, CO₂ emissions: 169 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 5.3 l/100km, fuel consumption (combined): 6.4 l/100km, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 4,895 mm, construction height: 1,910 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-INS POSSIBLE Mercedes-Benz Vito 111 CDI LONG * Air conditioning * Heated driver's seat * Tow hitch, 2000 kg * Automatic headlights * Cruise control * ABS * ESP * Central locking with remote control, 2 keys * Original MB radio * Electrically adjustable exterior mirrors Rjdpfxszqfz Ss Amyjcd * Electrically adjustable windows * Rear tailgate * DPF - EURO 6 * Immobilizer * New MOT/emission test Please call to schedule a test drive. Subject to prior sale and errors. You can find more offers on our website. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller also assumes no liability for errors resulting from typing, spelling, and data transmission errors. Listed equipment may need to be checked separately. Please understand that, although the technical and visual condition of this vehicle is good, we prefer to sell it to commercial businesses or for export, excluding any warranty, due to its age and mileage. Thank you very much! The vehicle description serves only to generally identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete and is not considered a guaranteed characteristic within the meaning of § 434 BGB paragraph 1, sentence 3. Errors and prior sale remain subject to change.

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2023, operating hours: 1,200 h, Equipment: rubber tracks, Hyundai HX130ALCR WITH CENTRAL LUBRICATION Year of manufacture: 2023 Operating hours: approx. 1000 Rcsdpfsyu Txbox Amyjd Model: Cummins F3.8 Power: Net output of 55 kW (72 HP) at 2,200 rpm Emission standard: Certified according to EU Stage V Weight: approx. 13,500 kg Turbo II pre-cleaner Dipper stick: 2,260 mm Dipper stick safety valves With work lights Adjustable boom: 4,560 mm Front dozer blade Boom safety valve With bucket linkage Counterweight: 2,450 kg Standard key Front work lights LED beacon Rear-view camera Hi-mate (mobile version) Fuel pump Crawler undercarriage Standard guard rail Laminated 7-mm glass window 2-way hydraulic lines Beka central lubrication system (V) Piping for quick coupler Proportional hydraulic lines 19-inch Kawasaki joystick Bucket/grapple changeover Without slew lock Air-suspended, heated seat Hydraulic oil – VG46 Rain protection Proportional joystick Road-liner, 500 mm, 43 links Central lubrication

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Rodpjzqfx Dofx Amyocd

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Rcjdpjzqfwmsfx Amyod

Year of construction: 2010, condition: ready for operation (used), A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating hours: approx. 75900h. Documentation available. An on-site inspection is possible. Available from approximately November 2026. Rcjdpfozqfwyox Amyjd

Year of construction: 2018, condition: ready for operation (used), An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible. Rcjdpozqfwtjfx Amysd

Condition: ready for operation (used), A manual Unitool micro and fine blasting cabinet is available. Operating pressure range: 0.5bar-10bar. Blasting media: aluminum oxide. Blasting media grain size: 120µm. Documentation available. An on-site inspection is possible. Rcodpjzqfw Hofx Amyjd

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Rcsdpfx Aezqfxdsmyod

Condition: ready for operation (used), Year of construction: 2012, Rated voltage: 12 kV, length: 4430 mm, height: 1700 mm, including documentation. An on-site inspection is possible. Redpfx Aszqfxksmyjcd

Condition: ready for operation (used), Year of construction: 2001, A Grisnich and H&H Engineering receiving and intermediate storage bunker for the temporary storage of harvested products such as apples, potatoes, etc. is available. Number of bunker cells: 3, bunker cell capacity: 33t, number of conveyor systems: 2, conveyor system length 1/2: 59m/72m. This system is not intended for the long-term storage of harvested products but is designed exclusively as an intermediate transfer point for truck transport. Documentation available. An on-site inspection is possible. Redpfxozqfx Rs Amyecd

Year of construction: 2019, condition: ready for operation (used), A dynamic Novoflow crossflow filtration system with integrated CIP system from the food industry is available. Filter area: 2m², Filter discs: 16, Filter disc material: ceramic, Filter disc diameter: 312mm, Pore size: 0.2µm, Max. operating pressure: 4bar, Max. operating temperature: 60°C, Speed: 450rpm, Process volume: approx. 60l. Machine dimensions X/Y/Z: approx. 1500mm/600mm/1500mm, Weight: approx. 250kg. Documentation available. An on-site inspection is possible. Rcedpfx Amszqfwgsyjd

Year of construction: 2021, condition: ready for operation (used), A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible. Rsdezqfxqepfx Amyscd

Condition: ready for operation (used), A fully automatic Ampack Ammann cup filling and sealing machine is available. Design: inline filler, cup lanes: 4, max. output: 10000cups/h, pre-filling: valve piston filler, pre-filling range: 10g-100g, pre-filling accuracy: +/-1g, product viscosity: high, product pieces: possible, main filling: valve piston filler, main filling range: 80g-275g, main filling accuracy: +/-1g, CIP cleaning capability: yes, lid type: aluminum foil lids, sealing heads: 5. Machine dimensions X/Y/Z: approx. 3450mm/1350mm/2100mm, weight: approx. 3200kg. The machine produces ready-for-sale cups with sealing and coding. Documentation available. An on-site inspection is possible. Rjdpfozqfw Tox Amyscd

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: COATED WEB Redpfxjwp R Hto Amyjcd BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Condition: ready for operation (used), Year of construction: 1994, Web width: Max 1250 Print width: 1230 mm Print repeat Max 760mm , Min 300mm Max. mechanical speed: 300 m/min Single unwind Max. unwind diameter: 1250 mm Drying type Boiler Rodpjwvvwdsfx Amyecd Substrate types: Paper, polyethylene (PE), polypropylene (PP), and other flexible packaging materials Ink system: Solvent-based inks/water-based inks

Condition: new, functionality: fully functional, overall weight: 2,741 kg, empty load weight: 2,741 kg, operation weight: 2,741 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB155 The STEELITE medium-class hydraulic hammers stand out with their high impact energy, robust construction, and reliable performance in daily site operations. Ideally suited for demolition, civil engineering, road construction, and recycling work, they offer an optimal combination of striking power, efficiency, and durability. The sound- and vibration-dampened design ensures high operator comfort with minimal stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Outstanding value for money - High impact force in a compact design - Excellent spare parts supply - Multiple mounting options - Ready for immediate use SCOPE OF DELIVERY - SHB155 hydraulic hammer - 1 x moil (pointed chisel) - 1/2" hydraulic hoses with metal abrasion guard - Accessory box - Operating manual (German) - CE Declaration of Conformity TECHNICAL DATA - Weight: 2,741 kg - Oil flow rate: 150–210 l/min - Max operating pressure: 250 bar - Tool diameter: 155 mm - Automatic lubrication system - Device cushioning - Suitable for carriers: 27–36 t Advantages of STEELITE Hydraulic Hammers Rcsdpjy St N Nefx Amyod - High breaking performance with smooth operation - Efficient power transmission for cost-effective work - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal balance of power, weight, and durability

Condition: new, functionality: fully functional, overall weight: 1,855 kg, empty load weight: 1,855 kg, operation weight: 1,855 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB140 The STEELITE medium-class hydraulic hammers impress with high impact energy, robust construction, and reliable performance for daily jobsite use. Ideally suited for demolition, civil engineering, road construction, and recycling applications, they offer an optimal combination of impact force, efficiency, and longevity. The sound- and vibration-dampened design ensures high operator comfort and minimizes wear on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost efficiency. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact force with compact dimensions - Excellent spare parts availability - Multiple mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB140 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box Redey St N Ajpfx Amyjcd - Operating manual (German) - CE Declaration of Conformity TECHNICAL DATA - Weight: 1,855 kg - Oil flow rate: 120–180 l/min - Max. operating pressure: 210 bar - Chisel diameter: 140 mm - Automatic lubrication system - Machine dampening - Suitable for carrier machines: 20 – 26 t Advantages of STEELITE Hydraulic Hammers - High demolition performance with smooth operation - Efficient power transmission for cost-effective work - Extended service life and low maintenance costs - Robust design for maximum operational safety - Optimal ratio of performance, weight, and durability

Condition: new, functionality: fully functional, overall weight: 1,366 kg, empty load weight: 1,366 kg, operation weight: 1,366 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB125 The STEELITE hydraulic hammers in the medium size class impress with their high impact force, robust construction, and reliable performance in daily jobsite use. Ideal for demolition, civil engineering, road construction, and recycling projects, they offer an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-dampened design ensures high operator comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum security and cost-effectiveness. YOUR BENEFITS AT A GLANCE - 1-year warranty - Outstanding value for money - High impact force in a compact design - Excellent spare parts availability - Various mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB125 hydraulic hammer - 1x moil point chisel - Hydraulic hoses 1/2" with steel hose protection - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 1366 kg - Oil flow rate: 90–120 l/min - Max. operating pressure: 210 bar - Chisel diameter: 125 mm - Automatic lubrication system Rcsdpfx Amjy St Nioyod - Machine damping - Suitable for carrier machines: 14–18 t Advantages of STEELITE hydraulic hammers - High demolition performance with smooth operation - Efficient power transmission for cost-effective work - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal balance of performance, weight, and durability

Condition: new, functionality: fully functional, overall weight: 835 kg, empty load weight: 835 kg, operation weight: 835 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB100 The STEELITE hydraulic hammers in the medium size class impress with their high impact energy, robust construction, and reliable performance for daily construction site operations. Ideally suited for demolition, civil engineering, road construction, and recycling work, they provide the optimum combination of impact energy, efficiency, and durability. The noise- and vibration-damped design ensures excellent operator comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact energy with a compact design - Outstanding spare parts availability - Various mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB100 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box Rcjdpfx Aoy St Hujmyod - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 835 kg - Oil flow rate: 80–110 l/min - Max. operating pressure: 210 bar - Chisel diameter: 100 mm - Automatic lubrication system - Machine damping - Suitable for carriers: 10 – 14 t Advantages of STEELITE hydraulic hammers - High breaking capacity with smooth running characteristics - Efficient power transmission for economical operation - Long service life and low maintenance costs - Robust design for maximum operational reliability - Optimal ratio of performance, weight, and durability

Condition: ready for operation (used), 15 electric motors from various manufacturers are offered. 1) 2 × SEW-Eurodrive R73 DT90L-4, power: 1.5kW. 2) Eurodrive AB R60 DT80K4/2B, power: 0.4/0.63kW. 3) Elektrim SF90S4, power: 1.1kW, weight: 125kg. 4) AEG. 5) Carl Bockwoldt CD2-71N/4D, power: 0.37kW. 6) K. W. Müller RD0KL 44U/max110KP, power: 0.09kW. 7) EMC Eldro ED30/5. 8) ZET DR 1.5/4-90L, power: 1.5kW. 9) Eberhard Bauer D143/146K. 10) Groschopp DM80-60, power: 4kW. 11) Flender Himmel SP0-G63/L, power: 0.18kW. 12) BBC QU X160 M2 BG, power: 15kW. 13) ATB Antriebstechnik A160L/4E-21, power: 15kW. 14) Georgii-Kobold KLB424V, power: 0.10kW. Inspection is possible by prior arrangement. Rcjdpfx Aszp U Tzemysd

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller Rodpozp R Dpofx Amyscd * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films

Year of construction: 2010, condition: ready for operation (used), An automatic TRUMPF sheet loading and unloading unit for laser cutting machines is available. Max. sheet dimensions X/Y: 3000mm/1500mm, min. unloaded part dimensions X/Y: 150mm/150mm, max. sheet weight: 1100kg, max. loading stack height: 300mm. Documentation available. An on-site inspection is possible. Rcjdszp Rgdopfx Amyod