Used Berg & Schmid Band Saw for sale (117)

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. Leveling element (1 set = 4 pieces) with stud bolt M 12x100. Feed side – left. Feed roller conveyor URB 290, Length 3000 mm. Feed adapter for URB 290/400. Outfeed roller conveyor URB 290, Length 2000 mm. Removal adapter for URB 290/400. Connecting piece for machine, attachment on the right. LM 55 M/man. Length stop, Measuring length 2000 mm. This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Application Types Pedpjxbiihofx Adnogw Sawing

Condition: used, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm Pjdpfx Adsxf I Uwonsgw capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m Unused display machine!!! Includes saw blade and base cabinet • For right and left miter cuts up to 45°, end stop at 90° and at 45° left • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • 2 speeds: 30 + 60 rpm • Automatic cooling directly on the saw blade • Length stop, assembly tool

Condition: good (used), Year of construction: 2002, machine/vehicle number: 022885001, Offer 24342 Pjdpfx Adot N Rk Nsnogw Technical data: - Fully automatic machine with hydropneumatic feed and MPS control system - with pre-programmable work cycles with infinitely variable speed regulation - Particularly suitable for stainless steel cuts - Workpiece clamping in pneumatic machine vice - Saw blade diameter 370 mm - Cutting speeds infinitely variable 15 - 70 1/min - Miter adjustable Right up to 45°, left up to 45 - 60° - Cutting range at 90° around 130 mm - Rectangle 180 x 100 mm - Square 120 x 110 mm - mitred at 45° around 130 mm - Rectangle 120 x 100 mm - Largest opening width of the pneum. Machine vice 160 mm - Drive 400 V / 3 kW - pneumatic connection 6 - 8 bar - Coolant device - infeed - roller conveyor 1000 mm - Discharge - roller conveyor with stop + digital measuring device 4000 mm - Space requirement approx. W 7500 x H 2050 x D 1100 mm - Weight approx. 1200 kg

Year of construction: 2002, condition: used, Vertical circular saw Make : Berg + Schmid Model : VKS 370 A year of construction : 2002 used Technical data: Cutting range saw blade 350 mm 90° round 110 mm/square 85x85 mm/ flat material 180x85 mm 45° Re round 105/square/85x85/ Flat material 130x85 mm 45° Lks round 110/square 85x85 mm/ Flat material 130x85 mm 60° round 105/square 85x85/ flat material 90x85 mm max. saw bladeØ 370 mm speeds 2 speeds 15-70 rpm. motor power 1,5/2,2 kW 400 V dimensions: WxDxxH 1800x1200x2100 mm Weight without coolant 710 kg Accessories: Coolmatic incl. short roller conveyor 1000 mm Pjdpfjmu Al Asx Adnogw

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Pjdpfx Adsquzd Renogw Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Pgodjtufcdepfx Adnew

Condition: used, Year of construction: 1999, machine/vehicle number: 012563001, rotational speed (max.): 3,600 rpm, input voltage: 400 V, For cutting aluminum profiles with miter cuts Year of manufacture: 1999 Advance payment Transport costs not included Pgjdpfx Adewl Uzyensw

Condition: new, saw blade diameter 315/350 mm Pjdpfjd Iin Tex Adnegw capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Pgjdeu R S I Hopfx Adnew Voltage: 230 V

Condition: excellent (used), saw blade diameter 350 mm Pgsdpsiqy Abofx Adnow

Condition: ready for operation (used), Berg & Schmid VKS 350 semi-automatic vertical circular saw, cold circular saw Cutting range at 90 degrees: round: 110 mm Cutting range at 90 degrees: square: 85 x 85 mm Cutting range at 90 degrees: flat: 180 x 85 mm Cutting range at 45 degrees: round (left/right): 105 / 110 mm Cutting range at 45 degrees: square (left/right): 85 x 85 / 85 x 85 mm Cutting range at 45 degrees: flat (left/right): 130 x 85 / 130 x 85 mm Saw blade diameter: 350 mm Total power requirement: approx. 2.2 kW Dimensions: 700 mm x 1010 mm x 2100 mm (W x D x H) You are welcome to come for a viewing. We can arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT ID. Podowtmp Ejpfx Adnsgw Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned belong to their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item are possible and reserved.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular sawing machine VELOX 350 VA-MPS fully automatic hydropneumatic machine For saw blades up to 350 mm Ø, miter left + right 45° and bevel cuts up to 45° left + right. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45°L 65mm round, 60mm square, 180x50mm flat - 45°R115mm round, 100mm square, 150x80mm flat Standard equipment: - State-of-the-art micro-processor control with multifunctional display - Safety package with the following functions: 1. minimum input pressure monitoring 2. vice monitoring/material clamping Pedpfxjrpiu Dj Adnsgw - Hydro-pneumatic control of the saw head - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed unit - Nonius for fine length adjustment - Integrated coolant spraying device - Connecting piece for chip extraction system Speed 3600 min-1

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Pgjdpfsxpi Aqsx Adnow Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m New, unused display machine! • Left miter 60°

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 130 mm 130 x 125 dimensions of saw-band 1440 x 13 x 0,65 mm dimensions 350 x 690 x 520 m band speed 30 - 80 m/min total power requirement 1,2 kW weight of the machine ca. 19 kg Pjdpefv Aq Uofx Adnegw Action Price!! Berg & Schmid - assembly band saw PBS 130 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60°

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Pjdpfswinykox Adnjgw Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts Psdjupxupspfx Adnsgw 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm Pgjdpjfgyh Tefx Adnew 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm Pgjdpsd Iip Tsfx Adnow 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m Pgsdpjd Iip Uefx Adnjw SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. Pedpfx Adefn Andjnjgw • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, length 500 mm width 380 mm height 760 mm weight 20 kg Pgedpfx Ajfv Arkednew Band saw base frame for all Berg & Schmid PBS saws. (PBS90 - PBS171)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter Pgedpfx Aofgyh Uednow • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 Pgsdpofgyiajfx Adnew saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: Pgodefgyicjpfx Adnow *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel Podpofg E Hlofx Adnogw • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise