Used Bending Tool for sale (39,693)

Year of construction: 2014, condition: like new (used), Universal Tool Milling Machine from Deckel ( Germany ) apply for toolmaker , mold maker, education and Locksmith Travel : 320x250x300mm Speeds : 40-2240 U/min Lsdpoi A I Rxjfx Ab Ujah Taper : SK 40 Table 600x210mm Travel (X,Y,Z -Achse) 300x140x340mm Spindle: SK 40 Speeds 40-2240U/min Feeds 12-630mm/min Power supply 50 Hz 3x 380V Motor 12,2KW Weight ca. 1000kg Dimension 1200x1900x1000mm

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no. 51265 Year of manufacture approx. 1967 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Power feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages Laodpfjghtvasx Ab Ush - Quill travel on vertical milling head 60 mm - Fixed angle table - Separate control cabinet Required space L x W x H: 1100 x 1100 x 1600 mm Weight: 650 kg Good condition

Condition: good (used), Tool trolley with inserts with turning holder for NC lathe, Laodsxn Tv Sjpfx Ab Ush Shaft: 50 mm

Condition: good (used), Year of construction: 1998, TECHNICAL DATA: Laedpfx Abowqraqs Ujh Rod diameter: 50 mm Standard roller diameter: 178 mm Delivery path: 134 mm Roller speed: 9 rpm Independently driven shafts: 3 smooths Connection voltage: 220/240 - 380/440 V Motor: 1.85 kW Hydraulic power unit: No Machine structure: Cast iron Piston pressure: No Working position: Horizontal / Vertical Intermediate roller feed: Manual (with gear reducer) Display: Digital Shoulder monoblock: Yes Number of programs: 1 Foot pedal control: Yes Dimensions (W x H x D): 650 x 1430 x 1100 mm Weight: 410 kg Complete documentation Power Round tube: 80 mm x 2 mm Square tube: 60 mm x 60 mm x 3 mm Round bar: 40 mm Flat bar: 60 mm x 10 mm Angle: 60 mm x 60 mm x 6 mm

Condition: good (used), Year of construction: 1996, functionality: fully functional, Control HMC400 incl. coolant system Ledpoxn Stisfx Ab Ueah Drive power 11 kW

Condition: ready for operation (used), Year of construction: 1990, Immediately available from university: Tool milling machine Maho Model MH 400 P Year of manufacture: 1990 Heidenhain TNC 135 Table 690 x 270 mm Travel with feed 360/200/375 mm Travel with handwheel 400/250/375 mm Lsdpjxqbf Tofx Ab Usah SK 40 Hydraulic tool clamping Spindle speed 40 – 2500 rpm, stepless Feed X and Z axis 5 – 1000 mm/min, stepless Feed Y axis 5 – 670 mm/min, stepless Rapid traverse 1.2 m/min Drive 2.2 kW Conventional handwheels for X/Y/Z axis Coolant system Tool holders Vice Weight 1,000 kg Price: EUR 4,500 plus VAT ex location

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, bending angle (max.): 190 °, bending radius (max.): 700 mm, bending radius (min.): 80 mm, overall weight: 32,000 kg, total width: 2,700 mm, total height: 2,450 mm, Tube diameter: 168.3 x 11 mm Tube insertion length: 6000 mm Max. bending radius: 700 mm Control system: Siemens 840 D Min. bending radius: 80 mm Max. bending angle +/-: 190° Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A Lajdpfx Abjxqa Rus Ush The machine is fully automatic and equipped with a tool changer. The following tools are available: Tube Ø 48.3 mm; radius 105 mm Tube Ø 60.3 mm; radius 120 mm Tube Ø 63.5 mm; radius 150 mm Tube Ø 76.1 mm; radius 190 mm Tube Ø 88.9 mm; radius 222 mm Tube Ø 114.3 mm; radius 285 mm Tube Ø 139.7 mm; radius 350 mm Tube Ø 141.3 mm; radius 700 mm Tube Ø 168.3 mm; radius 420 mm There were a few mandrels with direct engravings indicating their specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outer diameters were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has an estimated value of approx. €150,000.

Condition: good (used), branded engraving milling machine, cover GK12 with accessories Lsdsu T Nffepfx Ab Uoah

Year of construction: 2014, condition: ready for operation (used), This Bystronic TB LK 2.70 2.50 VL 1AS was manufactured in 2014. It includes an edge removal machine, washing machine, inspection and frame placement station, assembly, gas filling, and pressing machine, spacer applicator, and sealing machine. Consider the opportunity to buy this Bystronic TB LK 2.70 2.50 VL 1AS. Contact us for more information. Application Types Other Machine Tools Laodpfxsxn Dk Te Ab Ush

Condition: good (used), functionality: fully functional, Year of construction: 2012, Digital display - Year of manufacture: 2000 - Documentation available: No - CE marking present: Yes - Control: Conventional - Motor power: 2.2 kW - Capacity: 40 mm - Model: section bending machine Lasdpfsxn Tdpsx Ab Uoh - Shaft diameter: 60 mm - Transport dimensions: 1200 mm x 1200 mm x 1300 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages [pcs]: 1

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Lodpoxn Ax Aefx Ab Ueah

Condition: good (used), Year of construction: 1996, Schütte WU 405 tool grinding machine, Lasdsuachgjpfx Ab Ush year of construction 1996, annual maintenance carried out, NUM control, travel X/Y/Z 540/280/260 mm, travel W/A axis 360°, C grinding head 330°, 2 spindle ends, Spindle speed up to 12,000 rpm, automatic measuring probe, extraction system, CO 2 extinguishing system, belt filter system, Grinding wheel holders, clamping fixtures,

Condition: good (used), Year of construction: 2001, Pipe insertion length max 4500 mm - electronic 1-axis control - 2-axis measuring system - electronic display of the twist - electronic display of the longitudinal position - twist angle unit with stops - early mandrel retraction - automatic mandrel lubrication with micro-oil dosing Laedsxqavqspfx Ab Ueh Accessories: - incl. bending tool 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2 D - incl. various mandrels

Condition: good (used), Year of construction: 2005, used bending press, Graebener brand, type GRNM, year of manufacture 2005 Laedpfevvlllox Ab Ujh max. bending force 16 t. tool length 1,600 mm adjustment of the lower swing arm, hydraulic 2 cylinders dimensions 5080 x 3290 x 2540 mm weight 65 t.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Lodpfjh U Rzgox Ab Usah Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, Hydraulic profile bending machine Fast delivery time, prior sale reserved Country of origin: Turkey In stock: 1 Shaft diameter: 60 mm Roller diameter: 177 mm Number of driven rolls: 3 Motor power: 3.7 kW Speed: 6 m/min Flat bar upright (section/min. diameter): 70x10 mm / 600 mm; 30x10 Flat bar horizontal (section/min. diameter): 90x25 mm / 500 mm; 50x5 mm Square steel (section/min. diameter): 40x40 mm / 500 mm; 20x20 Round steel (section/min. diameter): Ø 40 mm / 500 mm; Ø 20 mm Tube (section/min. diameter): Ø 60x2 mm / 600 mm; Ø 20x Formed tube upright (section/min. diameter): 80x40x3 mm Square tube (section/min. diameter): 60x60x4 mm External angle iron (section/min. diameter): 50x5 mm / 1,000 mm; 30x4 Internal angle iron (section/min. diameter): 50x5 mm / 500 mm; 30x3 mm Length: 1160 mm Width: 1000 mm Lasdpexn Tbhofx Ab Uoh Height: 1175 mm Weight: 1194 kg Demo machine / as-new condition

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function Lajdpfx Aoxn Awxob Ujh • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: good (used), Year of construction: 2012, Matec 30 L, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Lsdpow Uf Izsfx Ab Ueah Electric handwheel, 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: used, functionality: fully functional, GHD Hartmann Automatic Bread Slicing & Packaging Line – GBK-420 & Selectra SL-50 (2005) For sale is a complete automatic bread slicing and packaging line manufactured by GHD Hartmann, consisting of the GBK-420 packaging machine and the Selectra SL-50 bread slicer. Y.O.M: 2001 Key Features and Specifications: Production Capacity: Up to 3,300–3,600 loaves per hour (55–60 per minute), depending on loaf size. Slicer – Selectra SL-50: Features a lower drum oiling system, enabling slicing of bread with up to 40% rye content. Packaging Machine – GBK-420: Includes an extended automatic infeed conveyor for packaging whole unsliced loaves. Capable of packaging sliced half loaves using an integrated turning device, maintaining loaf orientation. Lajdexp N Rbopfx Ab Ujh Features a clip-closing system with an integrated HPD date printer (6-digit format: XX.XX.XX). Construction & Configuration: Stainless steel panels for hygienic and durable performance. Left-hand line configuration.

Condition: good (used), Mandrel pipe bending machine, LANG type EL 45 Technical data: for pipe diameter 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s Electrical connection 380 V, 2.2 kW Weight approx. 1000 kg with tool: Lajdpfx Asqff E Eeb Uoh 16 x R 76 22 x R 76 28 x R 75 35 x R 105

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction Lajdpsr Ddurofx Ab Uoh 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: good (used), Driven and static tool holders from an Okuma LT 2000 / year 2022, 3 x axially driven holders, 3 x radially driven holders, 3 static holders, Lajdpfsxp Dwiox Ab Ush Pictures are original photos,

Condition: good (used), used tool cabinet with 3 shelves, make Schäfer Lasdpfxokt U Rds Ab Ush dimensions 500 x 500 x 1.000 mm

Condition: used, Workshop trolleys in various sizes and designs from Gedore & Orion Lsdetrl Drjpfx Ab Uoah All with castors, otherwise as per pictures

Condition: good (used), Technical data Working area: 250 × 700 mm Copy table size: 430 × 600 mm Travel / working range longitudinal (X): approx. 322 mm Travel / working range transverse (Y): approx. 200 mm Spindle drive / power: approx. 1.5 / 1.7 kW Spindle speed: approx. 80 – 20,000 rpm Copy ratio (enlargement / reduction): 1:1 to 1:4 Overall dimensions (approx.): 2,000 × 2,000 × 2,000 mm Lsdpfsxgh R Uex Ab Ujah Weight: approx. 1,650 kg