Used Bending Tool for sale (37,364)

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -divided -Tool: 60° -Dimensions: 203 x 45 mm Hnedpoc Sau Ajfx Ag Iol -Total length: 1800 mm -Lengths: 900/900 mm -Weight: 82 kg

Condition: good (used), Bending tool, die, upper blade, upper tool Hjdjhtbc Sjpfx Ag Ionl -Tool: for press brake, 4-piece set -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see drawing in the photos -Total length: 1977 mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimensions: 1015/200/H55 mm -Weight: 42.6 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos Hodpfxslcfh Tj Ag Ienl -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool Hodpfeb A Ihusx Ag Ijnl -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8" to 3 1/4" -Dimensions: 1020/310/H170 mm Hnedpfxogrzuuj Ag Iel -Weight: 28 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw Hnedpscn Shujfx Ag Isl -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos Hnjdpoip Eqrjfx Ag Ijl -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine Hnsdpfx Asip Eqkjg Iol -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Condition: good (used), functionality: fully functional, We offer a set of tools and accessories for press brakes, mainly PROMECAM. Sold as a single lot or in smaller batches. Price on request. Hedpoxvxkqsfx Ag Isnl

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,240 mm, WKS003 Tool cabinet set for bending with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm Two-colour powder-coated (Trumpf) Hnjdpfjur Itmsx Ag Iel Housing: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 kg net (475 kg gross) Pre-assembled as a set for approx. 33 running metres of press brake tools. Max payload 900 Kg for each drawer

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Hnsdpfoy Suavex Ag Iol

Operating hours: 16,982 h, condition: used, machine/vehicle number: 24-02577-3, Temperature control unit from manufacturer Tool-Temp, used and untested. The unit is intended for applications in tool temperature control, injection molding, and process engineering. It operates in a single-circuit system and is equipped with the TT-380 control system. Designed for use with oil*, with a maximum supply temperature of 360°C*, a heating capacity of 24 kW*, and a pump capacity of 90 l/min at 5.5 bar*. Year of manufacture is unknown; operating hours are indicated as 16,982. Accessories are limited to an operating hours counter. Hnsdpsy Suaiefx Ag Ijl

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Hnodoy St Urepfx Ag Iel

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Hnsdpfx Aex Hgmwsg Iol Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Hnedpfex Emfksx Ag Iel Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Hnsdpfx Agox Emd Ts Ijl Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm Hsdpfx Aey Nd Sieg Ijnl turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Hnjdpfx Agjvzb Nqe Ijl Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: Hnjdpfx Agsw Humle Iol • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: excellent (used), For sale: Professional CNC tool measuring and presetting device by PWB Systems AG Switzerland. The presetter is used for precise setting of tool length and diameter before mounting in the CNC machine. This reduces machine setup time and increases machining accuracy. The device is equipped with a SMART optical system with a camera, enabling accurate measurement of the tool edge. Swiss-made equipment – very robust and precise construction. ⸻ Technical specifications • Manufacturer: PWB Systems AG – Switzerland • Model: Tool Master ER10 Hnodpfxjyuqu Tj Ag Iol • Optical system: SMART camera • Measurement: Z / tool length • Digital display with control keyboard • Tool holder • Solid construction

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Hedpfx Ajwu Adbog Isnl Specification: V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: used, diameter div. number 44x Hnjdpfxsxyzxfe Ag Iol tool adaptor SK 40

Condition: used, diameter div. number 36x Hnjdpfx Asww Nb Esg Ijl tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Hedpfxsww Nbxs Ag Isnl

Condition: used, diameter div. number 40x tool adaptor BT 40 Hjdpeww Nbfjfx Ag Ionl