Used Bending Center for sale (16,166)

Condition: good (used), Year of construction: 2014, Table size 3500 x 820 mm, Traverses XYZ 3000 x 820 x 720 mm, Table load 2500 kgs, Spindle taper Din 40, Spindle speed 12000 rpm, spindle power 22Kw, Pgsdpfx Aew Nwt Eednjw 30 ATC, Mazatrol Matrix Nexus control, through spindle coolant, swarf conveyor

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , Pedpfx Adsxfvnronsgw 10,000 rpm, 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant.

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Pgjdpfxjxv Svms Adnsw 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z: 1016 x 406 x 406mm, Table 1467 x 267mm, Spindle speed 0 - 6000rpm, Spindle taper BT40, Podpfou Hyvdjx Adnjgw Spindle Motor 5.6kW, HAAS Control 10 Station ATC, USB port, coolant

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, Pedpfx Adexwytcjnegw spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Pgedpfxsv Tah Ae Adnew Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, Pgjdpfjw Npz Ijx Adnow 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, Psdpetmtktefx Adnjgw 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 550 x 560mm, Table 1250 x 660mm, workpiece load 1,000kgs Spindle speed 8,000 rpm, Spindle taper BT40, Spindle Motor 11kw, FANUC Oi-MC Control, Pgjdpfx Adou Hyuajnow 24 Station ATC, through spindle coolant.

Condition: good (used), Year of construction: 2016, Table size 2500 x 820mm, Traverses X Y Z; 2000 x 800 x 720mm, spindle to table min-max 140 – 860mm, Pgsdsvvt T Dspfx Adnew 35KW spindle power, spindle speed 18,000rpm, spindle taper BT 40, 30 station ATC, B axis -/+ 110 degrees, C axis 0.001 degrees, Mazatrol Matrix 2 control, swarf conveyor, through spindle coolant, 4th axis.

Condition: good (used), Year of construction: 2014, Traverses XYZ: 1020 x 610 x 610mm, table size 1200 x 600mm, Heidenhain TNC620 Control, BT40 spindle taper, 30 station tool changer, Spindle speed 12,000rpm, Spindle motor power 18.5kW, Through Spindle Coolant, Low volt light, Nikken 4th Axis Rotary Table Pgsdpfxoxv S Ezj Adnsw

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm. Podsxwyuaepfx Adnjgw

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger. Pgsdpeq R Tnzsfx Adnsw

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor, Pgsdpjkticxofx Adnow

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, bar capacity 80mm, Pgedjtt Nrtepfx Adnow B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, 40 station ATC, Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Podpfx Aou Ehi Aednogw Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.

Condition: good (used), Year of construction: 2011, Maximum cutting length 118mm (spindle 1), 125mm (spindle 2), Maximum cutting diameter 165mm, bar capacity 64mm, spindle speed 4,000 rpm, sub spindle speed 5,000rpm, milling speed 6,000rpm, C axis 0.001 degrees, Pjdpfxsu Hk Aus Adnsgw spindle power 15/11Kw, 12 station upper & lower turrets, Y axis +/- 40mm. Fanuc control, swarf conveyor, barfeed unit.

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, maximum machining length 1274mm, bar capacity 77mm, spindle speed 4,000rpm, milling speed 4,000rpm, 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit. Pgodpfx Adsvgz D Esnsw

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pgjdpowq Iwxsfx Adnsw Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), Year of construction: 2012, Traverses XYZ: 820 x 520 x 510mm, table 950 x 450mm, Spindle speed 8000rpm, Spindle motor 15kW, Pgsdpfx Adowq Su Ienow FANUC Oi-MD Control, Spindle taper BT40, 20 station ATC, Coolant,

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, 225 degree movement on B axis, 15HP spindle motor power, Pedjwxw A Hepfx Adnsgw 6,000rpm spindle speed, 6,000 rpm sub spindle speed, 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Podpjw U Sf Tjfx Adnjgw Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Pedpfx Adexpil Sjnogw Tool Setter Spindle Probe

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, Pgedpfx Adexpw Rvenjw coolant, Haas TR210 5 axis trunnion table

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1270 x 508 x 508mm, Psdpjxzt Sasfx Adnogw 20 station tool changer, Table 1321 x 457mm, 15kW Spindle Motor , Spindle Taper DIN40, spindle speed 40 - 8000rpm, Hurco WINMAX Control, Low Volt Light, Coolant