Used Bench Seats for sale (11,615)

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm Nksdpfx Ahsu Id D Uevju distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm Nsdpfx Aju N E Evohveku external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m Nsdpfxsvc Ayto Ahveku equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm Njdpfx Ahoir E Snovsku -Total weight: approx. 182 kg

Condition: good (used), bench drill, pillar drill, column drill -Manufacturer: AEG, Bench drill type DTBK-10 -Clamping table: 175 x 175 mm -Spindle mount: Drill chuck B16 -Protrusion: 200 mm -Column: Diameter 60 mm -Spindle stroke: 70 mm -Motor: 0.25 kW / 2800 rpm -Voltage: 380 V -Dimensions: 580/590/H730 mm Nksdpfohfavqjx Ahvsu -Weight: 60 kg

Condition: good (used), Year of construction: 1956, bench drill, pillar drill, column drill -Recording: MK2 -Protrusion: 260 mm -Travel distance: 190 mm -Speeds: 435 - 4350 rpm -Column diameter: 80 mm -Spindle stroke: 70 mm -Motor power: 450 W -Base plate: Sheet metal plate -Dimensions: 645/635/H780 mm -Weight: 130 kg Nkedpfx Ahjflk Hmeveu

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 760 mm, area performance: 4,000 m²/h, warranty duration: 24 months, tank capacity: 120 l, total height: 1,258 mm, total width: 834 mm, total length: 1,458 mm, water tank capacity: 130 l, operating speed: 8 mm/s, We offer for sale a new Ride-On Scrubber Dryer IXSA X9 with seat Device warranty – 24 months Battery warranty – 60 months Technical Data: • Working width: 760 mm • Machine performance: 4000 m²/h • Brush diameter (quantity): 380 mm (2) • Squeegee width: 1020 mm • Recovery tank capacity: 130 l • Solution tank capacity: 120 l • Rated power: 2100 W • Maximum gradient: 10% • Vacuum motor power: 24 V / 550 W • Brush motor power: 24 V / 2 x 550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 MPa • Brush speed: 180 rpm • Pad width: 13" • Vacuum: 188 mbar • Noise level (EN 60704): 65 dB(A) • Machine dimensions (L/W/H): 1458 x 834 x 1258 mm • Machine weight (without battery): 248 kg • Lifepo4 Batteries: 25.6V 200Ah – operating time approx. 5 h • Lifepo4 Batteries: 25.6V 300Ah – operating time approx. 7 h Nkedsyaaflspfx Ahvou • Possibility of opportunity charging Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro extended-cycle batteries for longer run time compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronics ensure extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – an industry-leading guarantee of durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating life – IXSA batteries offer greater efficiency and reduced long-term replacement costs ✅ Magnet-mounted brushes – easy installation and removal ✅ Long battery runtime with short charging time ✅ Highest quality American LINATEX squeegee blades ✅ Double vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – modern technology for better results and extended brush life ✅ High surface area performance – saves time and labour costs ✅ Robust construction and low operating costs – ideal for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and easy handling

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 650 mm, area performance: 3,300 m²/h, warranty duration: 24 months, tank capacity: 85 l, total height: 1,170 mm, total width: 660 mm, total length: 1,300 mm, water tank capacity: 95 l, empty load weight: 229 kg, We offer for sale a brand new IXSA X8 Ride-On Scrubber Dryer. Device warranty: 24 months Battery warranty: 60 months Technical Specifications: • Working width: 650 mm • Productivity: 3,300 m²/h • Brush diameter (quantity): 330 mm (2) • Squeegee width: 1,020 mm • Recovery tank: 95 l • Solution tank: 85 l • Rated power: 1,350 W • Maximum slope: 10% • Vacuum motor power: 24V / 500W • Brush motor power: 24V / 2x300 W • Maximum speed: 8 km/h • Brush pressure: 2.8 MPa • Brush speed: 180 rpm • Pad diameter: 13'' • Vacuum: 188 mbar • Noise level (EN 60704): 63 dB(A) • Dimensions (L x W x H): 1,300 x 660 x 1,170 mm • Weight (without battery): 229 kg • Lifepo4 batteries: 24V 200Ah. Working time: approx. 7 h • Batteries can be opportunity-charged Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnetically mounted • Pad holder • LifePro batteries with extended cycle life and longer runtime compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for increased reliability and long service life ✅ 5-year lithium-ion battery warranty – exceptional in the industry, confirming top durability and reliability Nsdpfjx U T E Nsx Ahvjku ✅ Significantly higher charge cycle count vs. gel batteries (700 vs. 5,000 cycles) and longer runtime – IXSA batteries offer more efficient operation and lower replacement costs in the long term ✅ Magnet-mounted brushes – quick and easy installation/removal ✅ Long battery runtime with short charging times ✅ Premium quality American LINATEX squeegee blades ✅ Dual suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – state-of-the-art technology for better cleaning performance and longer service life ✅ High surface efficiency – saving time and reducing operating costs ✅ Robust construction, low operating costs – built for intensive, professional use ✅ Ergonomic, intuitive operation – user-friendly design and controls

Year of construction: 2026, condition: new, functionality: fully functional, Technical details: Nsdpfxox Uw Eao Ahveku for band saw blades up to 206 mm wide Pressure measurement in bar Positioning through blade displacement Technical details: Blade width: bandsaw blades 30 - 206 mm Blade thickness: 0.6 - 2.4 mm Blade length: 4,000 - 11,000 mm Working speed: 4 - 20 m/min. Rated voltage: 3AC x 400V, direction of rotation "right" Frequency converter adjustable in steps Exact hydraulic pressure difference readable via pressure gauge Adjustable pressure lever Levelling roller incl. Anvil for repairing dents

Condition: excellent (used), Double grinding wheel Diameter 200 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Nsdjwz I Ewepfx Ahvjku

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill Nkedpfxjmzkg Rj Ahvou -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, Nkedpfxou U Hvwo Ahvsu can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Nsdpfsvtn Hmex Ahvoku Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: new, Control unit for BT-2 / BT-12 drilling machines Other spare parts for these machines available on request! Nkjdpfx Ahscwgaujveu

Condition: new, first registration: 01/2026, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,450 mm, fuel: diesel, color: white, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, airbag, central locking, GUARANTEED USED VEHICLE!!! Contact: For more information call: 3441197960 – 030933077 Franco / Nicola Follow us on Facebook and Instagram. Nodpfxox Tqdaj Ahvsku Specifications: IVECO DAILY 35C16 3.0 CC NEW DOUBLE CAB 7-SEATER CHASSIS, WHEELBASE 3450mm, PACK BUSINESS AND PACK CONSTRUCTION Fitted accessories: ABS, Airbag, Electric windows, Radio, On-board computer, Central locking, Traction control, Air conditioning, ESP, CD player, MP3, Suspension seat, Power steering, Steering wheel controls. Rossini Service: Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service has been an ISO-certified authorized IVECO service center. Our qualified and specialized staff have decades of experience in repair and fine-tuning of cars and industrial vehicles from any manufacturer. Every vehicle from Rossini Service is thoroughly inspected and carefully prepared before delivery.

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Nodpec Uydajfx Ahvsku Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), Year of construction: 1992, Technical data: Nksdswq Ea Rjpfx Ahvou - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Location: ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), mileage: 141,196 km, power: 62 kW (84.30 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,900 mm, total width: 1,900 mm, total height: 1,970 mm, Year of construction: 2017, Equipment: ABS, Android Auto, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, onboard computer, = Additional options and accessories = - Bluetooth - Air conditioning = Notes = TRANSPORT TO ANTWERP 390 EURO = More information = Technical information Number of cylinders: 4 Engine displacement: 1,968 cc Maximum front axle load: 1,500 kg Maximum rear axle load: 1,400 kg Weights Unladen weight: 1,792 kg Payload: 808 kg Gross vehicle weight (GVW): 2,600 kg Fuel consumption Average fuel consumption: 6 l/100km Urban consumption: 7.3 l/100km Extra-urban consumption: 5.2 l/100km Maintenance, history and condition Vehicle inspection (APK): valid until 06.2026 Nkjdpfx Asx Thb Ashvju Technical condition: very good Visual condition: very good Identification Reference number: 79

Condition: used, functionality: fully functional, machine/vehicle number: 18783, We offer a double bench grinder, which is still in good condition. - With base frame - Electric motor 220V / 50Hz - P1 1100W, P2 800W, 3000 rpm If you have any further questions or are interested, we are at your disposal. Nodsx A A H Nopfx Ahvsku

Condition: new, Year of construction: 2025, working width: 31,400 mm, bending angle (max.): 155 °, overall weight: 700 kg, total length: 36,000 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, bending cheek thickness: 30 mm, clear span: 80 mm, working height: 900 mm, Equipment: documentation/manual, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR3000/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 3140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 155° -Bending beam: 28 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 700kg Njdjuayamopfx Ahvjku Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 360 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2500/0,8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2640mm - Sheet metal thickness up to 0,8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 23 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop Njdpfemxgwtex Ahvoku -Weight about 350kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 240 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0,8L from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Njdpfx Aelxqk Hshveku Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 160° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2500/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2640mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 25 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal Nsdpfxert Hu Do Ahvjku -Front depth stop -Weight about 400kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 240 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR Nsdpfouayatjx Ahvsku All prices are plus 19% VAT Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Nkodpfx Ajtctmfjhvsu Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup