Used Bench Router for sale (3,146)

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used material color: blue frame profile: 76.2 - 100 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Ljdpfx Abehm Stzo Ushn Material color: orange box profile: 85 x 40 mm type of truss: GN85x41mm clear width: 2.775 mm 08x safety pins, used finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.980 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.755 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: used, Double Bench Grinder GREIF Type D 17 Serial No. 05105 Grinding wheel diameter: 175 mm Grinding wheel width: 25 mm Lhjdpexciu Tofx Ab Uon Motor power: 0.35 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Grinding spindle newly fitted with bearings - Original pedestal Required space (L x W x H): 500 x 450 x 1120 mm Weight: approx. 100 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Stationary or mobile operation (entire unit fits in a van) Ljdpfewuqwvox Ab Uohn System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Ledpfx Abecw H Sye Ujhn Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand Taiwan Model SYNTEC 60WE Main Drive Spindle speed range 6000–24000 Number of axis 3 Workpiece Workpiece X 2200 mm Workpiece Y 3700 mm Workpiece Z 200 mm Tools Type of tool holder ISO30 Ljdpfoxcb N Aex Ab Ujhn This 3-axis BLUE ELEPHANT ELECNC 2200x3700 was manufactured in 2021. It features a working area of 2200 mm by 3700 mm, a 9.6 kW HSD ATC spindle, and speeds ranging from 6000 to 24,000 RPM. Equipped with a Taiwan SYNTEC 60WE control system and Japanese YASKAWA 850W servomotors, consider the opportunity to buy this BLUE ELEPHANT ELECNC 2200x3700 CNC router. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: good (used), Stock No.: 3031 Manufacturer: Wörner Machine No.: 39135 Type / Model: B13 Drilling capacity: up to 10 mm Spindle mount: MK2 B16x2 Speed range: 560 to 7,000 rpm Stroke: 120 mm Throat: 250 mm Table size: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table to spindle nose min./max.: 80 / 480 mm Lhedpfx Aexfbaaob Uen Total connected load: kW Accessories/Equipment: drill chuck Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 / 2,000 mm

Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench rack of the manufacturer Vogelsang for sale. Technical data of the workbench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x workbench stand, new Material color: sendz. galvanized stand height: 900 mm stand depth: 800 mm Lsdpfx Abshm Sr Ds Uohn Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 110 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: used, Double Bench Grinder STEPHAN-WERKE HAMELN Type SLD 121 Serial No. 1176445 Grinding wheel diameter: 175/145 mm Grinding wheel width: 20 mm Motor power: 0.37 kW Grinding wheel speed: 2800 rpm Mains connection: 380 Volt, 50 Hz - Original base Lhjdpfxexciu Ho Ab Ujn - Side-mounted ball bearing slide with dovetail guide - Universal holder for the sliding carriage Space requirement (L x W x H): 470 x 430 x 1160 mm Weight: approx. 80 kg In good condition

Condition: good (used), Year of construction: 1991, machine/vehicle number: 00119451, Offer 24320 Technical Data: - Drilling capacity - in steel 13 mm - - in aluminum 15 mm - Drill spindle mount MK 1 - Drilling depth 70 mm - Distance spindle / column 180 mm - 5 drill spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - height-adjustable drill table with T-slots 250 x 220 mm - Distance drill spindle / table approx. 270 mm - machined baseplate with T-slots 170 x 170 mm Lhodpfx Asxfa U Aeb Usn - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with - Quick-release drill chuck 1 - 13 mm

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle Lhsdpoda Nqxefx Ab Uen in stock, available now

Condition: good (used), Stock number: 3030 Manufacturer: Wörner Machine number: 26207 Type / Model: B8 Drilling capacity: up to 10 mm Spindle mounting: Drill chuck Ljdpoxfa Upefx Ab Ushn Speed range: 780 to 10,000 rpm Stroke: 70 mm Throat depth: mm Table clamping surface: 240 x 220 mm Head adjustment: Machine footprint: 320 x 430 mm mm Total connection: kW Accessories/Equipment: Drill chuck Condition: very good Weight: 120 kg Dimensions with table: 600 x 800 x 1,200 mm Table working area: 560 x 720 mm

Condition: used, Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are for illustrative purposes only. - The color of the material may vary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. The scope of delivery includes: 02x workbench stands, used Material color: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (screwed framework) 04x workbench crossbar, used Material color: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x screw M10x35 08x nut Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Lhsdpsvmpf Refx Ab Uen General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch Lhjdpfx Aotrpiisb Ujn - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0113647, Offer 22109 Technical specifications: - Drilling capacity - in steel 18 mm - - in aluminum 20 mm - Drill spindle mount MK 2 - Drilling depth 100 mm - Spindle to column projection 215 mm - Drill spindle speeds continuously variable 100 - 1800 rpm - Drive 400 V / 0.65 / 1.20 kW Lsdjwmnn Njpfx Ab Ujhn - Base plate / drill table 280 x 320 mm - Max. distance between drill spindle and base plate approx. 520 mm - Space required approx. W 350 x H 1050 x D 700 mm - Weight approx. 100 kg - With keyless drill chuck 1 - 13 mm

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm Ljdpjb Eldnjfx Ab Uehn spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data of the workbench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x workbench stand, new Material color: sendz. galvanized stand height: 900 mm stand depth: 1.000 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) Lhedshm Sr Sjpfx Ab Usn 04x workbench crossbars, used Material color: orange box profile: 110 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 117018, Offer 24440 Technical Data: - Grinding wheel diameter: approx. 450 mm - Grinding wheel width: approx. 63 mm - Grinding wheel bore: approx. 203 mm - Wheel speed: 950 rpm - Drive: 400 V / 3.3 kW - Working height: approx. 800 mm - Working depth / safety depth adjustable - Connection for extraction pipe: 100 mm - Coolant system - Required space: approx. W 1300 x H 1250 x D 850 mm - Weight: approx. 350 kg Lsdpfx Abswzivqo Ujhn

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge) Lhsdpfjvnrm Hex Ab Usn

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used material color: blue frame profile: 76.2 - 100 mm stand height: 900 mm stand depth: 800 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 85 x 40 mm type of truss: GN85x41mm clear width: 2.775 mm 08x safety pins, used finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 - 46 mm Lsdshm Stljpfx Ab Ushn width chipboard: 2.980 mm depth chipboard: 800 mm Surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.755 mm depth chipboard: 800 mm Surface: coated if necessary (two-part if necessary) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Year of construction: 1995, condition: good (used), machine/vehicle number: 044092, Offer 22148 Technical data: Ljdpfx Abeiba R No Uohn - Grinding wheel diameter approx. 200 mm - grinding wheel width approx. 25 mm - grinding wheel bore approx. 51 mm - wheel speed 1450 rpm - drive 400 V / 0,7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm Ljdjrwmbgepfx Ab Ushn - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 Ledpfxod Ingfo Ab Ujhn -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm – 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 152279, Offer 25253 Technical specifications: - Tapping capacity up to M 20 - Drilling capacity in steel 30 mm - Drill spindle taper MK 3 - Drilling depth 120 mm Lodpfx Abjxc Uz Ee Uehn - 10 spindle speeds 120 - 2160 rpm - Drive 400 V / 0.7 / 1.3 kW - Table size 390 x 420 mm - Distance spindle/table approx. 220 - 600 mm - Spindle arm reach/column 260 mm - Table stand - Required space approx. W 550 x H 1900 x D 800 mm - Weight approx. 300 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Technical data: - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer Lhodpfjf Tcy Dex Ab Uen - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm - weight approx. 1100 kg

Year of construction: 1987, condition: good (used), machine/vehicle number: 87298, Lg.No. 20344 Technical data: Drilling capacity in steel ST 60 13 mm quick-action drill chuck 1 - 13 mm drilling spindle speed infinitely variable 630 - 5000 rpm drilling spindle stroke 80 mm throat 195 mm Lhedpjnub Aujfx Ab Ujn column diameter 65 mm table dimension W 240 x D 260 mm drilling unit height adjustable by hand crank max. distance table / base plate to spindle 280 mm drive 400 V / 0,45 kW space requirement approx. W 300 x H 800 x D 700 mm weight approx. 50 kg