Used Bench And Rack for sale (15,500)

Condition: new, length 2000 mm width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m weight 160 kg Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest standards Lhodpogvqzvofx Ab Uen Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Center open compartment Paintwork: RAL 5010 blue, RAL 6011 green RAL 7016 anthracite

Condition: used, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you 100 used depth requirements of the manufacturer Nedcon to purchase. This depth Edition is suitable also for other manufacturers. Technical data to the depth requirement: Shelf system: Nedcon Type: NS In the scope of delivery included: 100xTiefenauflagen, used Material color: compl. zinc-plated f. stand depth: 800 mm Overall length: 800 mm clear span width: 710 mm C-Profilabm.: approx. 60 x 50 mm Traverse Edition: approx 40 mm Material thickness: 2.0 mm Weight / unit: 1,983 kg Our services at a glance: (Prices on request) -Installation, construction Ljdpfsdqkf Iex Ab Ushn our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ROBLAND T120 TL Year of construction 2008 Manufacturer Robland Table milling machine with trunnion table spindle diameter 30mm spindle length 180 mm Motor power 7,5 PS (5,5kW) Table size 2540 x 710mm with table extension ruler Table height 930 mm Lhjdpetukp Tefx Ab Usn Height adjustment 205 mm Number of revolutions per minute 3000 / 4500 / 6000 / 7000 / 10000 Dimensions of the dispensing table 760 x 500 mm Diameter of the suction nozzle 120 mm Voltage 3 x 230V / 3 x 400V Weight 1070 kg CE marked

Condition: used, bore capacity in steel (diameter):10 mm throat:190 mm bore stroke:65 mm total power requirement:0,5 kW weight of the machine ca.:0,05 t dimensions of the machine ca.:0,3 x 0,7 x 0,7 m column diameter:80 mm machined bearing plate::Ja table surface area:300 x 250 mm Lhedpfx Absh Ra Nxe Uen height adjustment:0 - 280 mm speeds:950 - 2000 U/min

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) Lhodpfx Aed Tqalob Ujn - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2022, machine/vehicle number: MR004714, Combined planer and thicknesser with a maximum planing width of 310 mm. The thicknesser has a maximum working height of 230 mm. Machine assembled and equipped with cord and plug. Af hine is equipped with the following options: - Tersa planer shaft Ljdpfevzl S Asx Ab Uehn - Handwheel with thicknesser readout clock Technical specifications: - Maximum planing width: 310 mm - Planer shaft diameter: 70 mm - Number of knives: 3 pieces - Planer shaft type: Standard - Maximum chip removal: 4 mm - Maximum planing height: 230 mm - Minimum planing height: 4 mm - Planer height reading: Measuring ruler - Feed speed: 6 /min - Thicknesser table dimensions: 430 x 310 mm - Thicknesser table height adjustment: Manual - Planer blade length: 1328 mm - Planer guide dimensions: 1300 x 150 mm - Guide adjustable at an angle: 90-45 ° - Motor power: 4 hp - Serial number: 26KL28725

Condition: new, length 2000 mm Lodpfxegvqznj Ab Ujhn width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Middle open compartment Painting: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite gray

Condition: as good as new (ex-display), Technical data for the shelving upright: Shelving system: Dexion Type: HI280 The scope of delivery includes: 01x Shelf rack upright, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead web and base plates The uprights are pre-assembled 2,100 mm high 500 mm deep Ljdpjtrlawsfx Ab Ushn Remark: These are new goods, second choice unused. New, second choice means that there may be dust deposits or soiling may be present. Currently available in stock: 10 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Lhjdpfx Abofdkb Uo Ujn - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Technical data for the shelving upright: Shelving system: Dexion Lhodpetrmfwofx Ab Ujn Type: HI280 The scope of delivery includes: 01x Shelf rack upright, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead web and base plates The uprights are unassembled 2,100 mm high 400 mm deep Note: The shelving uprights are supplied unassembled when ordered. delivered unassembled. For an additional charge of 5.00 € / piece plus VAT, we can also pre-assemble the also pre-assemble the uprights. These are new goods, second choice unused. New goods, second choice means that there may be dust deposits or soiling may be present. Currently available in stock: 30 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Lhodpjfdkbhsfx Ab Ujn - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the pallet rack upright: Racking system: Jung Heinrich Type: Delta The scope of delivery includes: 01x pallet rack upright, used Material color: blue Profile dimensions: U: 80 x 60 x 3 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( welded framework ) 8,200 mm high 1,050 mm deep Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Lhodpfx Aerlkxieb Uen This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Lhjdpfx Absd Tbbdo Uon Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: SSI Schäfer Type: PR 600 Included in delivery: 1x pallet rack upright, used Material color: Sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 2,200 mm Depth: 850 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Lhodpfx Abowmkxks Uon This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) Lhjdpfx Aoqt Dmysb Uen - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Scope of delivery includes: 01x Bracket for rear wall mesh, used Material color: sendzimir galvanized Diagonal length: approx. 405 mm Overall width: approx. 90 mm Overall depth: approx. 30 mm Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm Material thickness: approx. 3.0 mm Weight/piece: 0.660 kg Lsdpfx Abeww Alqs Ushn Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this involves additional costs, which can be quoted separately depending on the delivery location and order scope.

Condition: good (used), Technical data for pallet rack upright: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet rack upright, used Material color: Sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, upright protectors and base plates The uprights are pre-assembled (bolted truss) Lodowryabopfx Ab Uehn Height: 2,200 mm Depth: 1,050 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for pickup. Any desired transport or shipping of this item is associated with additional costs, which can be inquired separately depending on the delivery location or scope with us.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: SSI Schäfer Lhjdpowmkwtjfx Ab Uen Type: PR 600 Included in delivery: 1x pallet rack upright, used Material color: Sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 2,200 mm Depth: 800 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2008, operating hours: 9,380 h, Serial number: ZEF128TLN8LA0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18364 Specifications: Model year: 2008 Hours: approx. 9380 Power: 118 kW Weight: approx. 22,810 kg Undercarriage: See photos S70 quick hitch Gjerstad digging bucket Gjerstad grading bucket Indexator rototilt Central lubrication Hammer hydraulics Articulated boom Additional lights Rotator beam Minor damage on the right side (shown in photos) Radio/CD Air conditioning Description: For sale: 2008 Kobelco E215B tracked excavator with articulated boom.Comes with 2 buckets and a rototilt. A grapple can be included for an additional charge.The machine is ready for delivery at short notice. A minor damage on the right side is visible in the photos. Hours: 9380 Lhsdew Rkbrspfx Ab Ujn Own weight: 22810 Total Weight: 22810 Kw: 118 Model: E215B

Condition: used, The used SSI Schäfer R3000 shelving system (item no. ZB361315) offers a high-quality solution for organized storage in workshops, warehouses, or industrial settings. Measuring approximately 13 linear meters in length, with a depth of 600 mm and a height of 2.49 m, this shelving unit features sturdy shelves (each 128 × 60 cm, load capacity up to 150 kg) across 6 storage levels. The frames are galvanized and pre-assembled—ideal for quick and effortless installation. The shelving system is available directly from stock—perfect for anyone looking to purchase a robust, sustainable racking system second-hand. Please note: The shelving described is an example. The SSI Schäfer R3000 shelving system is modular and can be individually configured to your required length—fully tailored to your needs. PRODUCT DETAILS: - Height: approx. 249 cm - Depth: approx. 60 cm - Length: approx. 1300 cm - Shelves: approx. 128 x 60 cm, galvanized - Load capacity: 150 kg per shelf - Shelf pitch: 5 cm - Shelf item no.: ZB361315 - Uprights: approx. 249 × 60 cm, galvanized, pre-assembled - Storage levels: 6 - Condition: Used, SSI Schäfer R3000 SCOPE OF DELIVERY: - 11 x uprights (approx. 249 × 60 cm), pre-assembled - 60 x shelves (approx. 128 × 60 cm) - 03 x cross braces Price: €764.00 net €909.16 gross Invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via partner carriers—freight costs vary by postal code - Professional assembly and dismantling by trained teams optionally available - Shelf inspection in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also available Lhedpoxnwuxjfx Ab Uon PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding quotation—individually tailored to your requirements. Whether new installations, modifications, or extensions—we offer expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On site, you can get a comprehensive overview of our pallet racks, warehouse racks, and other solutions. Many systems are assembled and available for direct viewing. Our experts are happy to assist with any questions or provide individual consultation—we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and variations for these and other products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2013, operating hours: 11,000 h, Serial number: HCMDCK50H0030xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21370 Specifications: Certified until 12/2025 2013 model Approx. 11,000 hours 122 kW Operating weight: 22,300 kg Undercarriage (see pictures) Novatron GPS Engcon tiltrotator Grading bucket S70 quick coupler Central lubrication Track width: approx. 60 cm Machine width: approx. 300 cm Extra work lights Rearview camera Air conditioning Radio/CD Description:Hitachi ZX210 crawler excavator from 2013.Delivered with grading bucket, tiltrotator, and Novatron GPS.Certified until 12/2025 and ready for immediate operation.Quick delivery available. Hours: 11000 Own weight: 22300 Width: 300 Lhedpfjxm Tc Ajx Ab Ujn Kw: 122 Model: ZX210LC-5B Beltegraver m/ tilt, skuffe og GPS.

Condition: used, Year of construction: 2000, operating hours: 11,330 h, Serial number: YF01-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20645 Specifications: 2000 model Hours: Approximately 11,330 Weight: 23,200 kg 107 kW Chassis (see pictures) Belt width: 60 cm Total width: Approx. 300 cm S70 quick release Hammer hydraulics Central grease Steelwrist Rototilt Sanding bucket Rotor lamp Air conditioning/AC Videos Ready for delivery Description:Kobelco SK235 from 2000.The machine is sold with a rototilt and sanding bucket.Ready for delivery. Lhedpfx Abjwp Egbo Usn Hours: 11330 Own weight: 23200 Total Weight: 23200 Width: 300 Kw: 107 Model: SK235SR

Condition: used, Year of construction: 2012, operating hours: 8,300 h, Serial number: JKUK0574E01H5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21282 Specifications: 2012 model Certified until 06/25 Hours: Approx. 8,300 Weight: 5,545 kg 33.8 kW Undercarriage (see pictures) Blade Quick coupler RT30 Rototilt Digging bucket Grading bucket Climate/AC Radio/CD Service performed at local workshop Delivery by agreement Description:Kubota KX057 tracked excavator from 2012.The machine is certified until June 2026.Sold with tiltrotator and 2 buckets.Delivery by agreement. Lhedsxbbcaopfx Ab Uen Hours: 8300 Own weight: 5545 Year controlled: Yes Year controlled until: 06.25 Kw: 33,8 Model: KX057-4

Condition: used, Year of construction: 2018, operating hours: 4,650 h, Serial number: 17850xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21201 Specifications:• 2018 model• Hours: approx. 4650• Weight: 8500 kg• 51.6 kW• Undercarriage (see pictures)• Track width: 45 cm• Total width: 230 cm• Blade• Hammer hydraulics• S50 quick coupler• Central grease• Rototilt• Digging bucket• Grading bucket• Extra lights• Radio/CD• A/C• Recent 500-hour service• Ready for delivery Notes:• Needs a new battery Description:Takeuchi TB280 tracked excavator from 2018.The machine is sold with tilt and 2 buckets. Recently had a 500-hour service.Ready for delivery. Hours: 4650 Own weight: 8500 Width: 230 Kw: 51,6 Model: TB280FR Lhjdpfx Abew Srmlj Ujn

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Ledpsvg A D Tjfx Ab Ujhn Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd