Used Beer for sale (248)

Condition: used, Year of construction: 2018, Used Filling Monoblock Alfatek Easy Compact 2018 MONOBLOCK Mod. ROBOT COMPACT 7/1 Machine suitable for treating refermented beer in the bottle. Machine suitable for treating Steinie Flasche 0.33 I bottles Height 174mm — diameter 70mm Composition: • Elvira LP Series filler with 7 filling valves • Single-head crown capper Mod. “Eagle/C” Max. production: 500/1000 bph with 330 cc bottles and product without foam. Production may vary according to the type of product to be bottled. Power supply: 380V three-phase * N — 50hz • Electrical panel position: Right • Control panel nameplate language: Italian Worktop: 1000 + -50 • Bottle entry and exit: on the right Bottle size: • Height: from 174 to 310 rams. Diameter: 58 to 110mm. • Bottle neck diameter: from 16 mm (int.) to 30 mm (ext.) Level variation in the bottle: from 40 min to 75 mm Bottle neck height: H. level + 30 min The Used Filling Monoblock Alfatek Easy Compact can only be unloaded with a forklift of adequate capacity and forks of no less than 1,400 mm in length. Complete with safety guards in accordance with CE standards. ACCESSORIES INCLUDED IN THE PRICE: Lsdpfsvgukrsx Affsak CE-rated safety guards; Equipment for n. 1 cylindrical bottle format; Towing head. return head, bottle arrival table.

Condition: used, Year of construction: 2023, Overview  This isobaric filling monoblock was manufactured in 2023 by the Italian company Alfatek BP Srl. The machine is a Beer Plus version with an additional 8-head deoxygenation turret before the filler, providing three pre-evacuations for improved filling performance. After the sale, it will be fully overhauled, delivered as good as new, and covered by a 12-month warranty. The machine is available immediately. Technical data  Capacity: 6,000 bph (at 33 cl) Formats: 33 cl, 50 cl, 75 cl (crown cork 26 mm and 29 mm) Execution: 24-head rinser 8-head deoxygenation turret 28-valve isobaric filler 4-head crown capper (Arol) Application: Beer and carbonated beverages (e.g. lemonade, soda) Neck finish: Crown cork 26 mm, crown cork 29 mm Condition: In excellent state, to be delivered fully overhauled and guaranteed Scope of Delivery  Complete monoblock including rinser, deoxygenation turret, isobaric filler, and crown capper Documentation available 12-month warranty after overhaul Laedpjw U Si Sofx Affsk

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer storage tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel tanks Gross volume: 15260 l Pressure capacity: 0,99 bar Max. operating temperature: 20 °C Cooling area: 6,95 m2 Length: 2,52 m Width: 2,52 m Weight: 2100 kg Material: stainless steel Base construction: standing frame Features: insulation, tank fittings Laedpfx Asvu Tvveffjk

Condition: new, maximum load weight: 28,580 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,675 mm, loading space volume: 90 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, * Certificate for: draft beer, beverages, roll containers, chemicals, ONP paper and Daimler 9.5 * 2 rows load securing * Edscha sliding roof * Lift axle * Disc brakes * Full air suspension * Rear portal doors * 13 pairs of lashing rings (expandable) Lasdpfxexf Rxxs Affek

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. Lodpfxovgu Dxe Affjak The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.

Condition: used, The crates reach the palletiser via a two-lane crate conveyor belt running transversely. A sliding device pushes a row of four crates at a time to the palletiser gripper head's pick-up table. After repeating this process, the crates are arranged in a 2x4 pattern below the gripper head. The crates are then placed in a single layer on the pallet below. Additional title: palletising of beverage crates Capacity: 3000 crates/h Formats: Beer crates; Euro pallets; NRW, swing-top, longneck and Steiniflaschen bottles Features: Pushing device, box table, palletising robot, Control panel with user interface and touchscreen monitor Lodpfew U D E Sjx Affjak Layer patterns: 8 crates in a 2x4 arrangement per layer; 5 layers per pallet or 7 layers per pallet (for stone bottles)

Condition: used, mileage: 500 km, power: 265 kW (360.30 HP), first registration: 09/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 40 m³, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * ORTEN Kettliner swivel wall construction * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Reversing camera * 2,000 kg Bär tail lift * 4 rows of load securing * Ball and jaw trailer coupling * Trailing steering axle * Full air suspension * Automatic gearshift * Euro 6 * Constant throttle * Cab = Classic Space medium length * Lane departure warning, attention, turn assist and active brake assist * Traffic sign, roll control and stability assistant * Distance control cruise control * Mirrorcam * SaftyPackage * Navigation system * Roof hatch Laodpfx Ajtl Ntqoffek * Air conditioning * Heated seats * Spoiler * Sun visor * 1,100 mm loading sill

Condition: used, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Lasdpfxjvgvwmj Affjk Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Condition: used, Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you. Material: Pump housing and impeller in stainless steel Position: free standing/mounted on base Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter Ljdpjw Uvbfofx Affeak

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 40 m³, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * ORTEN Kettliner swivel wall construction * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Reversing camera Laedpfxetl Nurj Affsk * 2,000 kg Bär tail lift * 4 rows of load securing * Ball and jaw trailer coupling * Trailing steering axle * Full air suspension * Automatic gearshift * Euro 6 * Constant throttle * Cab = Classic Space medium length * Lane departure warning, attention, turn assist and active brake assist * Traffic sign, roll control and stability assistant * Distance control cruise control * Mirrorcam * SaftyPackage * Navigation system * Roof hatch * Air conditioning * Heated seats * Spoiler * Sun visor * 1,100 mm loading sill

Condition: used, Year of construction: 2003, operating hours: 10 h, Used Filling Monoblock CIMEC 6-6-1 1000 bph Technical Features and Specifications The Used Filling Monoblock CIMEC 6-6-1 1000 bph, model AMERICA DPS 6/6/1 EAGLE C, offers a versatile and reliable solution for isobaric bottling processes, specifically designed for beer production. Manufactured by the Italian company CIMEC in 2003, this monoblock integrates advanced features to ensure precision, quality, and operational safety. Structure and Configuration of the Monoblock The CIMEC 6-6-1 monoblock combines three key units into one compact structure: a rinser, an isobaric filler, and a capper. This configuration, therefore, optimizes line space and reduces processing time, ensuring a maximum output of 1000 bottles per hour (bph). Rinser: Equipped with 6 grippers for bottle holding and a single treatment with a fixed nozzle, it efficiently cleans the bottles before the filling process. Additionally, it ensures that no contaminants remain inside the containers, contributing to product purity. Isobaric filler: The filling section includes 6 valves with 3 buttons, allowing controlled pressurized filling, ideal for beer and other carbonated beverages. Meanwhile, the pre-evacuation and leveling system reduces oxygen presence inside the container, preserving the product’s organoleptic properties. AROL Capper – Eagle C model: The capper handles 26 mm crown caps and operates with 1 capping head. As a result, it ensures precise capping, preventing leaks and contamination. Advanced Technical Features The Used Filling Monoblock CIMEC 6-6-1 1000 bph ensures high operational efficiency and precise process control. The isobaric technology, in contrast to standard gravity filling, maintains constant pressure inside the container during filling, avoiding foaming and guaranteeing accurate dosing. Pre-evacuation system: It eliminates air from the bottle before filling, thereby minimizing oxidation. Automatic leveling and degassing: This system ensures consistent product levels and removes excess gas, so the final seal remains airtight. Included Formats and Spare Parts The monoblock comes with false bottles, enabling cleaning and system testing without starting production. Furthermore, it includes two formats, both with a 65 mm diameter, suitable for standard beer bottles. In addition, the machine comes with two jack cylinders, allowing fast replacements and maintenance in case of wear. Safety Features of this Used Filling Monoblock for beer The monoblock includes technical manuals and integrated safety systems to protect operators and comply with current regulations. Each section features safety devices that prevent malfunctions and, thus, guarantee smooth operation. Specifically, safety guards, emergency stop buttons, and pressure monitoring ensure that any risk is minimized. Lsdjvy E Nljpfx Affoak Conclusion of this Used Filling Monoblock for beer The Used Filling Monoblock CIMEC 6-6-1 1000 bph offers a reliable solution for the beer industry, designed to maximize product quality and minimize downtime. Thus, it is ideal for breweries seeking enhanced productivity and consistency. Although older in manufacturing year, its robust build and spare parts availability extend its operational life. Overall, this monoblock embodies efficiency, precision, and adaptability, making it an excellent investment..

Condition: used, Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you. Ljdpfsw Uu U Rsx Affjak Additional title: Post-filtration Material: stainless steel Position: free standing Base construction: Cylindrical housing on tubular feet with spherical caps Features: Pressure gauge, housing with clamping screws or clamping ring

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 32 m³, loading space length: 6,700 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * medium-length driver's cab * 40 mm jaw trailer coupling with trailer brake connections * ball head trailer coupling * reversing camera, reversing alarm * automatic climate control * sun visor * lane keeping assistant * attention assistant * stability assistant Ledjxfdn Tjpfx Affsak * turning assistant * traffic sign assistant * active brake assist * navigation system * full air suspension * swivel wall construction system Orten Kettliner "light" * 4-row load securing * DERKA certified * beverage certificate * draft beer certificate * 2,000 bear tail lift * 2,300 mm aluminum platform * MP5 with cameras instead of mirrors Vehicle available at short notice ---- Special equipment: low engine tunnel storage, trailer socket 12V / 13-pin, exterior mirror camera MirrorCam, battery 220 Ah, brake connection standard and DuoMatic, cockpit multimedia interactive, compressed air horn, Driver assistance system: turning assistant, driver's cab: steel suspension, comfort, vehicle without rear underrun protection, 150 A generator, manual lifting roof (steel), 3-part fender, 3-part fender with splash guard, steering oil cooling, reinforced engine brake, wheelbase variant 5200 mm, residual heat utilization, acoustic reversing alarm (external warning signal), tail lift switch, reinforced end cross member, additional key with remote control (2), seat cover / upholstery: velour passenger seat, seat cover / upholstery: velour driver's seat, seats in the driver's cab: comfort driver's seat, sun visor outside, additional 24V socket in the passenger footwell, Truck Data Center 7 (fleet management system), preparation for 4 surrounding cameras (display in the on-board monitor), regulated water pump Other equipment: Emissions standard EURO 6, axle configuration: 4x2, axle load front axle 7.5 t, Actros 5, Actros driver's cab S / M, heated approach/front mirror, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, exhaust to the right outside, batteries arranged next to each other, rear axle differential lock, compressed air connection in the driver's cab, steel compressed air tank, compressed air unit with condensate monitoring, medium compressed air unit, automatic switch-on for driving lights (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency braking assistant (Active Brake-Assist 5), driver assistance system: lane departure warning, driver's cab: rigid driver's cab entrance, driver's cab: hydraulic tilting device, driver's cab: M ClassicSpace, 2.30 m, tunnel 320 mm, vehicle outline lights LED, electric windows, tinted windscreen, vehicle without rear window, speed limiter system, 12-speed gearbox - type: G 211-12, Urea tank (AdBlue): 60 liters, rear axle crown wheel 440, body/structure: chassis, comfort locking system, fuel tank: 290 liters aluminum, left, unregulated power steering pump, multifunction steering wheel, air intake from the front, 2-stage air compressor, heated air dryer, engine 10.7 liters - 265 kW R6 diesel (OM 470), engine variant OM 470, type of use: local transport, wheelbase not defined, ramp mirror, rain sensor, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the driver's cab: armrests on both sides of the driver's seat, seats in the driver's cab: passenger function seat, splash guard at the front, stabilizer at the front axle, storage flap outside left, 12V socket in the passenger footwell, tachog

Condition: used, Year of construction: 2012, Used Filling Monoblock CEM 6-6-1 for fermented beer 1000 bph The Used Filling Monoblock CEM 6-6-1 for fermented beer 1000 bph, built in 2012, has an operational system for filling fermented beverages and still wine. Consequently, this machine produces 1000 bottles per hour and maintains high-quality standards through rigorous maintenance and a robust component design. Introduction to the Filling Monoblock The filling monoblock for beer 1000bph integrates three main subsystems to create a continuous, streamlined workflow for washing, filling, and capping operations. Notably, the machine rotates in a clockwise direction, and therefore, this feature positively influences internal flow dynamics and process synchronization. In addition, the filling monoblock 1000bph supports efficient production and minimizes cycle times. General System Specifications of the Used Filling Monoblock CEM 6-6-1 for fermented beer 1000 bph The monoblock processes specific bottle formats with high efficiency. Specifically, it handles longneck bottles with a capacity of 0.33 L and Belgian bottles with a capacity of 0.75 L. Moreover, engineers incorporated 6 dummy bottles for circuit sanitization to ensure strict adherence to hygienic standards. Furthermore, the integrated operation of washing, filling, and capping within a single module enables the machine to achieve the output of 1000 bottles per hour. As a result, production remains highly streamlined and cost-effective. The Rinsing Unit The rinsing unit of the Filling monoblock for beer initiates the filling monoblock process and equips itself with 6 grippers to handle each bottle. First, it executes a single treatment cycle for each bottle, and then it cleans every bottle meticulously before the filling process begins. This method upholds high hygienic and quality standards. Additionally, the rinsing unit prevents contamination and promotes reliability in subsequent processes. Technical Aspects of the Rinsing Unit Ljdpovvl Tiefx Affeak Gripper Configuration: The unit employs 6 grippers that handle each bottle precisely and in a controlled manner. Single Treatment Cycle: The system cleans each bottle individually, which significantly enhances cleaning efficiency and process reliability. Consequently, it improves overall production quality. The Filling System The filling phase uses a configuration with 6 valves evenly distributed along the monoblock, and it applies a gravity filling method with a fixed nozzle. Specifically, engineers designed this configuration to control the liquid flow accurately, and it adapts seamlessly to the different bottle formats—the longneck (0.33 L) and the Belgian (0.75 L). Accordingly, the arrangement of 6 valves and the gravity filling method enable the machine to meet the high throughput of 1000 bottles per hour. Moreover, it minimizes liquid waste and delivers consistent fill volumes, which further enhances the system’s efficiency.

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport Lasdpfx Ajw Tmt Asffok

Condition: used, Used Plant SPADONI for Beer Processing over 700 hl per year Machinery for Beer Production in this SPADONI Beer Processing Plant The SPADONI beer processing plant, with a capacity of over 700 hl per year, incorporates highly specialized machinery that enhances efficiency and precision in every stage of the production process. Since 2012, this plant has integrated advanced solutions for milling, brewing, cooling, and fermentation, allowing operators to maintain maximum control of production parameters. Milling and Steam Generation The Spadoni malt mill, manufactured in 2012, processes malt at a rate of 200 kg/hour. It crushes malt with adjustable granulation, thereby optimizing the extraction of fermentable sugars. Additionally, the Thermindus LPG steam generator, installed in the same year, delivers the necessary heat for brewing and pasteurization operations. As a result, it ensures stable and reliable thermal control. Brewhouse and Thermal Management The core of the plant features the Spadoni MBS 500 brewhouse, which operates with the capability to perform a double batch per day. Since 2012, this system has facilitated a continuous and high-performance wort production process. Furthermore, the 1,000 L hot water tank, produced by Spadoni Srl, supplies adequate thermal energy to support the brewing cycle. For efficient wort cooling, the plant contains a Spadoni plate heat exchanger and wort aerator, which has been in operation since 2012. This component rapidly reduces the temperature while ensuring proper oxygenation before fermentation. Moreover, the 10 hl hot and cold water storage tanks, constructed by Spadoni Srl, optimize thermal management during production, thus guaranteeing operational stability. The 1,400 L cold water tank by Alfalaval further enhances the thermal management system by supplying refrigerated water essential for rapid wort cooling. Consequently, the plant maintains consistent processing conditions. Ledpjv Ew Svsfx Affsak Fermentation Cellar The fermentation cellar accommodates approximately 700 hl of annual production capacity. It includes tanks that effectively regulate and maintain the necessary temperature levels. The 2012 Spadoni fermenters, each featuring a usable volume of 11 hl, were manufactured by Spadoni Srl and correspond to the SDF1000B model. Their insulated construction, which provides a total capacity of 1,295 liters, ensures superior thermal stability during fermentation. Additionally, the cellar houses two 13 hl fermenters, produced in 2014 and 2016 by Ricci Engineering, along with an extra 6 hl fermenter from 2012. As a result, operators can manage production volumes with precision. Temperature Control To regulate fermentation temperature, the plant includes a 2012 fermenter temperature control panel, which allows for accurate monitoring and adjustment of fermentation parameters. In addition, the 2012 MTA glycol fermenter cooling unit maintains optimal temperature throughout the fermentation cycle, preventing any thermal fluctuations that could affect final product quality.

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Ledsw Tlz Eopfx Affsak Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: used, Used filling line for beer in cans 25000 cph The used filling line for beer in cans 25000 cph delivers high-speed beer canning across multiple formats. Specifically, it fills 500 ml, 440 ml, and 330 ml cans with standard 202 lids, consistently reaching a capacity of 25,000 cans per hour. Although the line remains installed, it is currently not operational. Nevertheless, all components remain in excellent working condition. Empty can feeding system To begin with, a Linker DPG-500 depalletizer, built in 2012, unloads empty cans at the start of the line. Subsequently, rope conveyors from Linker (model RC/KHS, 2012) transport the cans to a Triplexrinser TR/KHS rinser, also from 2012. In this section, the system moves cans smoothly and prepares them efficiently for the next stage. As a result, the line ensures gentle handling while maintaining productivity. Lajdpfow Ahfaex Affsk Filling and seaming Next, the KHS Innofill DVD 60 filler, installed in 2017, performs the filling process using 60 dedicated valves. In parallel, a Ferrum F08 seamer seals the cans, while an NSM 30A lid feeder supplies lids with precision. Consequently, this configuration ensures accurate dosing and secure sealing at high throughput. Notably, the filling and seaming block is among the most recent upgrades to the line. Pasteurization and quality control After sealing, the product passes through a KHS Innopro KZE flash pasteurizer, installed in 2017. Additionally, this unit includes a 5000-liter buffer tank to stabilize the process. Meanwhile, a KHS Innocheck fill level inspector (2012) continuously monitors the liquid level in each can. In doing so, it guarantees compliance with rigorous quality standards. Therefore, the pasteurization and inspection phases preserve both safety and consistency. Secondary packaging and handle application Once the cans are processed, a KHS Innopack Kisters SP 050 B2 multipack packer (2012) wraps them using shrink film—either printed or transparent. It operates on a double-lane system at 50 cycles per minute. Moreover, a KHS CSM 050-02 handle applicator (2011) applies handles at the same speed, which facilitates later transport. In other words, the secondary packaging setup optimizes the line for retail and logistics needs. Tray packing and shrink wrapping Following multipacking, the line uses a KHS Innopack Kisters TP 035 B2 tray packer (2012) to place packs into trays at 35 cycles per minute. Then, a KHS Innopack Kisters FS-AL shrink wrapper (2017) applies shrink film to stabilize the load. Thus, the packs remain secure and compact throughout distribution. Furthermore, both machines maintain high reliability under continuous operation. Palletizing and end-of-line operations At the end of the line, a KHS Innopal MPH 1-1 palletizer (2012) stacks trays without using interlayers. This simplifies the palletizing process while saving materials. Subsequently, a Fiat MFP pallet wrapper (2017) secures the stacked trays with stretch film.

Condition: used, Year of construction: 2004, Used fully overhauled Depalletizer 40,000 bph We have a used fully overhauled depalletizer available for purchase manufactured by Krones. This depalletizer was fully overhauled by Siemens PLC in 2020, including the installation of new PLCs and sensors, ensuring that the machine is up-to-date and efficient. The depalletizer is capable of operating at high speeds of up to 40,000 bottles per hour, making it ideal for high-volume production lines. Features and Specifications In addition, this Used Full Overhauled Depalletizer is equipped with a bottle mass table, sheet removing arm, and magazine, as well as a pallet magazine. The machine operates automatically, with a new PLC in 2020 Siemens ensuring that your production line runs smoothly and efficiently. Additional Details With its high-speed capability and reliable operation, this depalletizer is an excellent investment for any production line in need of efficient and streamlined depalletizing. The machine is currently in a ready-for-operation state with Siemens PLC and comes equipped with safety features and manuals, making it easy to operate and maintain. Invest in Your Production Line Today Lasdpfxsvguhde Affjk If you are looking for reliable and efficient depalletizing equipment for your production line, this used full overhauled depalletizer from Krones is an excellent choice. Contact us for more information on pricing and availability. This Full Overhauled Depalletizer was in operation in a company that produced beer in glass bottles. It is complete with all safety protections and can be immediately collected by the buyer. We can also provide you with assembly, packing, and transport services if needed through our agencies. The Used Full Overhauled Depalletizer was in production and efficient and was replaced only thanks to incentives that allowed the purchase of a newer one with the latest generation techniques. It is dismantled in stock and with all documents available. We are at your full deposal for this and other products.

Condition: used, Year of construction: 2014, Used filling monoblock ALFATEK MBC 7/1 LP ELVIRA for re-fermented beer year 2014 This filling monoblock offers a compact and efficient solution for bottling re-fermented beer in glass containers. Consequently, Alfatek manufactured this machine with a gravity filling system to ensure a stable process that meets industry standards. Technical Features of the Used filling monoblock ALFATEK ELVIRA for re-fermented beer The ALFATEK MBC 7/1 LP ELVIRA filling monoblock for beer year 2014 includes 7 fixed filling valves, specifically designed to process beer in 0.33 L and 0.75 L glass bottles. Moreover, the gravity filling  prevents organoleptic alterations, and significantly reduces the risk of foam formation during filling. Laedpsv N Dcisfx Affjk In addition, the integrated capper features 1 capping head for 29 mm crown caps, ensuring a secure and effective seal. Furthermore, this capping system works in synergy with the gravity filling process to maintain the internal pressure stability of the bottles. Operational Specifications Notably, the monoblock fills up to 1,000 bottles per hour, making it ideal for small to medium-sized production lines. As a result, bottles move through the system with a clockwise rotation, thereby optimizing workflow efficiency. Along with the monoblock, the conveyors are also included in the sale. They have the following dimensions: 1.80 m in length, maximum width 52.5 cm, minimum width 25 cm. Regarding electrical specifications, the Used filling monoblock ALFATEK ELVIRA for  re-fermented beer operates at 415V and 50Hz. Therefore, it remains compatible with most industrial plants. Safety and Structure of the Used filling monoblock ALFATEK ELVIRA for re-fermented beer Importantly, the machine includes safety devices that protect the operator during operation. Additionally, its compact structure measures 1,190 mm in width, 1,900 mm in length, and 2,330 mm in height, allowing seamless integration into existing production lines without major modifications. Current Condition and Availability At present, the Used filling monoblock ALFATEK ELVIRA for re-fermented beer remains in storage. Thus, it is ready for inspection and installation in a new production facility. Given its robust structure and advanced technical features, it presents a reliable choice for breweries looking for a high-performance and tested machine. Ultimately, this monoblock provides a valuable opportunity to improve production efficiency. Likewise, it represents a strategic investment in a well-maintained used system. Consequently, breweries can optimize their operations while reducing acquisition costs. Additionally, its compatibility with industry standards ensures smooth integration into various production setups. Therefore, this machine offers both efficiency and reliability, making it a practical choice for modern bottling facilities.

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. Ledpfxsw Hr Awe Affoak All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Year of construction: 2013, Used Filling Monoblock Comac Bottle Line SMARTBLOCK 6-6-1 700 bph The used Comac SMARTBLOCK 6-6-1 filling monoblock offers a compact and highly efficient solution for bottling beer in 0.33-liter glass bottles. This machine, manufactured in 2013, handles 700 bottles per hour, making it an ideal choice for medium-scale craft beer production. Furthermore, a detailed technical analysis of the SMARTBLOCK 6-6-1 highlights its key features and specifications, which set it apart in the industry. Key Features of Used Filling Monoblock Comac The Used Filling Monoblock Comac Bottle Line SMARTBLOCK combines the rinsing machine, filling machine, and capping machine into a single continuous process. As a result, it optimizes workflows, saving both time and space. Its compact structure, measuring 2580 mm x 2580 mm, proves particularly advantageous for breweries with limited floor area. Rinsing Machine The rinsing machine of the Used Filling Monoblock Comac Bottle Line SMARTBLOCK grips bottles securely with six clamps. Moreover, the system carries out a single rinse cycle, reducing water consumption while ensuring thorough cleaning for sensitive products like beer. In addition, the counterclockwise rotation enables a smooth and efficient sequence, ensuring consistency throughout the rinsing process. Filling Machine The filling machine with its isobaric system ensures precise and stable filling, even at high pressures. For this reason, it delivers excellent performance when handling carbonated products. Six traditional valves, paired with mobile nozzles, manage CO₂ effectively and prevent oxidation, thereby preserving the beer’s quality. Furthermore, the traditional isobaric valves maintain carbonation integrity during the entire process. Capping Machine The capping machine of the Used Filling Monoblock Comac Bottle Line SMARTBLOCK applies crown caps with a diameter of 26 mm. Notably, its single-head capper handles 700 bottles per hour without delays, sealing each bottle tightly to retain carbonation and block contamination. Consequently, the machine provides reliability while maintaining the integrity of the final product. Operational Details and Safety The Used Filling Monoblock Comac Bottle Line SMARTBLOCK operates in production today, demonstrating its reliability and robustness. Additionally, the machine includes all required safety certifications, protecting workers during use. The included technical manuals assist operators in performing maintenance and training efficiently. Therefore, breweries can maintain smooth operations without frequent interruptions. Used Filling Monoblock Comac Bottle Line SMARTBLOCK: Electrical Specifications Lasdpfx Afevgtz Aofjk The machine operates with a 400 V power supply, consuming 2.6 kW at 50 Hz. Similarly, its energy-efficient design minimizes power usage while delivering consistent performance. As a result, it remains a cost-effective choice for medium-scale breweries.

Condition: used, Year of construction: 2014, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section Laodew Ag Ndspfx Affsk The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: used, Year of construction: 2007, Used Inspector Filtec 2007 Lajdpjvgur Asfx Affok This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.

Condition: used, Year of construction: 2000, Please note that this single machine are not sold individually but are part of this bottling line: CLICK HERE   Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph General Technical Description The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph is an integrated bottling solution designed for efficient filling operations. This monoblock combines rinsing, filling, and capping processes into a single unit. It is engineered to handle both carbonated and still beverages with high precision and reliability. Mechanical and Structural Features Constructed with robust stainless steel, the machine ensures durability and resistance to corrosion. The rinsing station features 32 valves, providing thorough internal cleaning of bottles. The filling unit includes 56 isobaric valves, designed to maintain equal pressure during filling. This is critical for carbonated products, preventing foam and ensuring consistent fill levels. Capping Systems The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph is equipped with two capping turrets. One has 8 heads for crown caps, and the other has 8 heads for plastic screw caps. This dual capping capability offers flexibility in packaging options. The precise torque control ensures secure sealing, maintaining product integrity during distribution. Operational Capacity and Efficiency With a capacity of up to 7000 bottles per hour, the machine suits medium-scale production needs. The synchronized operation of rinsing, filling, and capping reduces bottlenecks. The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph optimizes throughput while maintaining high-quality standards. Automation and Control Systems Equipped with advanced PLC systems, the monoblock allows for precise control over the filling process. Operators can adjust parameters such as fill levels and production speed via an intuitive interface. Sensors monitor critical functions, providing real-time data to ensure consistent performance and quick response to any deviations. Compatibility and Adaptability Designed to handle both PET and glass bottles, the machine accommodates various bottle sizes and shapes. Changeover procedures are streamlined to minimize downtime when switching formats. The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph offers versatility for producers handling multiple product lines. Maintenance and Reliability The machine’s design facilitates easy access for maintenance tasks, reducing service time. High-quality components and wear-resistant materials extend the equipment’s lifespan. The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph is known for its reliability in continuous operation, essential for meeting production targets. Applications in the Industry Ideal for carbonated beverages like soft drinks, beer, and sparkling water, the isobaric filling technology preserves carbonation levels. Laedpfxewbfh Aj Affek