Used Beam Packs for sale (7,047)

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: upright Ledpfx Abexqante Ushn Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; one former manway in the lower cylinder area was welded shut by the previous operator; feet were cut off during tank removal and are supplied loose (with minor dents; see photos) External diameter: 2,900 mm Internal diameter: 2,700 mm Overall height: 5,000 mm Heating/cooling: available Insulation: available Max. overpressure: 3.0 bar Agitator: blade agitator Support design: adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Previous use: dairy TANK Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top cover (DN 500) Discharge: present Discharge (alternative entry): 65 mm Note: Pressure marks on the insulation jacket, discharge end cut off MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: offset in top cover Agitator equipment: Agitator data not readable; motor/gear unit with signs of corrosion

Year of construction: 1992, condition: used, Technical details: lifting capacity: 5 t span width: 21000 mm stroke speed: 8,0 precise lift: 0,8 m/min rope diameter: 14 mm connected load: 10,2 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 100 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 71 A2, travel speed 2,5 m/min. Size of travel wheels Ø 170mm (16 pieces) Trolley main hoist EKDH 525 H12 KV3-2/1 F10; type KBV 71 B8/2; travel speed 20,0 / 5,0 m/min.; size of travel wheels Ø 125mm (4 pieces) Hoisting gear: type KBH 125 B4; lifting height 12.000 mm; braked with displacement runner; lifting speed (main stroke 8,0 m/min. and fine stroke 0,8 m/min.) single hook size 2,5 rope Ø 14mm; rope length 28.3 m; power unit group FEM 1 AM Operation via pushbutton pendant control with DST Special feature: traversing piece with interlock and stitch tracks + infrared There are more bridge cranes with a 21-meter span for sale. Lhodpeu Nvg Dsfx Ab Uon *

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Lhodju Rv Uqepfx Ab Uen Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes

Condition: good (used), Year of construction: 2007, laser power: 4,000 W, Trumpf TruLaser 3040 laser cutting system, Year of manufacture 2007, Sinumerik 840 D control system, X/Y travel 4000 x 2000 mm, Laser power 4 kW, Laser on 22,400 hours, Beam on 11,400 hours, CO2 laser, Pallet changer, Longitudinal conveyor belt for small parts, Cutting head quick changer, Standard equipment: Enclosed machine frame with integrated laser unit Laser unit: CO₂ laser TruFlow 2000 with high-frequency excitation, maintenance-free turbo radial blower, reflector telescope, cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drive: Maintenance-free three-phase AC Servo motors Ledpjv R Dvxjfx Ab Uohn Cutting head quick-change system for laser cutting heads with 5" lenses and 7.5" lenses Programmable cutting gas pressure setting ControlLine Capacitive height control and process control Automatic focus adjustment FocusLinePlus Laser power control Positioning laser NitroLine High-pressure cutting Fast processing with SprintLine Automatic production of smaller holes PlasmaLine Plasma sensors Automatic sheet metal surface and edge detection Programmable power cycles Microweld Spray device for safe thick sheet processing Automatic blow-off system Residual heat extraction Sinumerik 840D control system: Open PC-based control system, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice TruTops Laser lite workshop programming Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction system, and compact dust extractor Protective cabin RJ45 network connection via installation via teleservice 3.5" floppy disk drive TFT color display More powerful lasers: TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation, and lens monitoring sensors Extended machine equipment: PierceLine Process Control System A total of two auxiliary machine pallets, structural steel struts Craneable traverse for

Condition: used, Year of construction: 2002, Empty weight: 75 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - Serial number: 991 - Voltage [V]: 230 - Current consumption [A]: 0.07 - Power [kW]: 0.1 - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhsdpfswtx Umsx Ab Uon Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 525 kg, Capacity: 30.000 kg. Year: 2017 Country of origin: Denmark. Size (L x W x H): 3500 x 400 x 700 mm. Weight: 525 kg. Length 3500 mm. Excellent condition. Lhodpfxsxphd Tj Ab Uon We have 2 pcs. in stock.

Condition: used, tank capacity: 5,530 l, GENERAL INFORMATION Equipment: spray head, crane lugs Design: vertical Remarks: Double jacket probably with sprinkling ring – suitable only for non-pressurized temperature control; welding of the double jacket in the upper area has partially come loose; outlet diameter 65 mm (tapering to approx. 50 mm towards the tank); small dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm External diameter: 1,660 mm Internal diameter: 1,550 mm Total height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. pressure: 3.2 bar Agitator: paddle agitator Support design: height-adjustable legs Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 liters Product contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,500 mm Last application: dairy TANK Max. operating temperature / °C: 145°C Number of legs: 4 HEATING/COOLING JACKET Underside tempering: double jacket Lhjdpfxoxqamcs Ab Uon FEATURES Manway / dome: on top (Ø 450 mm) Outlet: available Note: outlet pipe cut off MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI 304) Material legs: stainless steel AGITATOR Voltage: 380 Volt Bottom bearing: Agitator arrangement: eccentric in the top head

Year of construction: 1992, condition: used, Technical details: lifting capacity: 10 t span width: 21000 mm stroke speed: 6,3 m/min. precise lift: 1,0 m/min Lhsdpfxev N Ib Nj Ab Ujn rope diameter: 14 mm connected load: 15,5 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 112 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 80 A4, travel speed 2,5 m/min. Size of travel wheels Ø 200mm (16 pieces) trolley main hoist EKDH 525 H20 KV3-4/1 F6; type KBF 80 A8/2; speed 20,0 / 5,0 m/min.; size of travel wheels Ø 160mm (4 pieces) Hoisting gear: type KBH 160 B2/12; lifting height 10.000 mm; braked with sliding runner; lifting speed (main stroke 6,3 m/min. and fine stroke 1,0 m/min.) Single hook size 5.0 rope Ø 14mm; rope length 46m; drive group FEM 1 Am Operation via pushbutton pendant control with DST Special feature: crossover piece with interlock and stitch tracks Es stehen weitere Brückenkrane mit der Spannweite 21 Meter zum Verkauf. *

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm Lhedpfxeiiiuye Ab Usn No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes

Condition: good (used), Year of construction: 2000, functionality: fully functional, total width: 4,000 mm, total length: 5,000 mm, total height: 3,000 mm, overall weight: 7,500 kg, working width: 2,000 mm, punching force: 50 t, Working width: 2000 mm Punching head: 650 x 650 mm Punching head has mechanically adjustable low-point stops and can be rotated (with a digital counter for the punching depth to simplify adjustment) Punching pressure: 50 t Punching belt with automatic clamping jaw feed including oscillating belt Machine features a CNC control system Lhedewlu N Dopfx Ab Usn Unwinders are not included Punching machine runs smoothly and is still ready for use

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, working length: 3,000 mm, working width: 2,030 mm, total width: 1,100 mm, total length: 3,300 mm, total height: 2,720 mm, table width: 120 mm, overall weight: 1,200 kg, Edge Press, Beam Type SCM Falcon/S Specifications: • Condition – Used, after inspection • Manufacturer – SCM • Model – Falcon/S • Maximum gluing dimensions – 300 x 203 cm • Remote control for pistons (independent vertical and horizontal control) • Double-T beams, 12 cm wide • Two vertical pistons with 60 mm diameter and two smaller horizontal pistons with 35 mm diameter • Maximum vertical piston pressure – approx. 15,000 kg • Maximum horizontal piston pressure – approx. 5,000 kg • Maximum pressure – 160 bar • Pump motor – 3.0 kW • Year of manufacture – 2002 • Overall dimensions: 335 x 110 x 272 cm (L x W x H) • Weight – approx. 1,200 kg Additional information: • Very good, factory technical and visual condition • The photos shown represent the actual item for sale Lsdpjxn Tqvjfx Ab Uehn • Possibility to power up and inspect the machine on site.

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Lhodexn I Rwopfx Ab Usn

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Crane lugs Design: Suspended Comments: Lugs made of Fe; insulation jacket partially detached in the area of the lower bottom (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Ex-protected: Motor is ex-protected (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/cooling: available Insulation: available Power: 2 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical shaft seal with thermosyphon vessel Lhsdpfx Aoxqah Hjb Ujn Agitator: Beam agitator Support design: Lug mounting Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 litres Double jacket volume: 166.0 litres Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Lower bottom temperature control: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: Galvanised steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet (alternative entry): 140 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: centred in top head Agitator equipment: Mounts for flow breakers inside the vessel (flat plates of the flow breakers not present; see photos)

Condition: used, Year of construction: 1995, Technical details: lifting capacity: 3,2 t lift: - mm span width: 5300 mm stroke speed: 5,0 m/min rope diameter: 6,5 mm precise lift: 0,80 m/min electric control: ja lifting height max. hook position: 6 m travel of hook: 6000 mm total power requirement: 13,6 kW weight of the machine ca.: 5,3 t transport dimensions LxWxH: ca. 6,8 x 2,35 x 1,5 mit 4 Paletten m Lhsdpfjwm Ivtox Ab Usn Crane classification DIN 15018 H2 B3 Crane trolley: -engine number GE 1348 -Drive unit group: 1Am -4x wheels, travel wheel Ø 100mm -fine crane travel 5.0 m/min. -Crane travel 20.0 m/min. -disc brake Trolley undercarriage: -Speed 20.0 / 5.0 m/min. -power .12 / .03 kW Lifting gear Abus -FDB GM 800.3H06/S12873E -load capacity 3200 kg -speed 5.0 / 0.80 m/min. -Power 3.20 / 0.45 kW (50ED) -Hook path 6.0 m - Rope Ø 6.5 mm Floor operation via push-button switch, electric i.D. *

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P Lsdowu Ahgopfx Ab Ushn

Condition: used, mileage: 58,129 km, power: 294 kW (399.73 HP), first registration: 10/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, operating hours: ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7-color display and navigation, LGS IV, two engine variant with built-in engine JCB 129 kW level 3b, front disc brush - sideways shiftable, double-sided sweepings pickup, HD washing system 280 bar, hydraulic suction hose boom at the rear, gross volume 9 m³, water system approx. 4320 liters, weed brush preparation, container 9 m³ volume, built-in engine JCB 129kW/level 3b, feeder brush fixed 5 x 1300mm, total water volume 4320 liters, fuel tank 350-400 liters, coated suction nozzles on both sides, 15m hose reel, rear area observation, rear suction hose Lhodpfx Abot Hcfts Usn

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, rotating bevel unit on the upper spindle with two-axis control for the left and upper spindle max. working width: 260 mm max. working height: 160 mm Number of spindles: 6 pieces 1. Spindle: bottom spindle diameter 40 mm clamping length 270 mm speed 6000 rpm motor power 11.0 KW 2. Spindle: right spindle diameter 40 mm clamping length 170 mm speed 6000 rpm motor power 11.0 KW shared motor with left spindle 3. Spindle: left spindle diameter 40 mm clamping length 170 mm speed 6000 rpm 4. Spindle: top spindle diameter 40 mm clamping length 270 mm speed 6000 rpm motor power 11.0 KW Spindle: bottom Spindle diameter 40 mm Motor power 11.0 kW Speed 6000 rpm Clamping length 270 mm 6th spindle: top Chamfering unit Motor brakes: mechanical Up/down adjustment of the upper spindle: electric, selectable with/without feed Feed brake system: Yes Continuous feed speed up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. chip removal for joining: 10 mm Jointing bevel cutter on planer: Yes Driven rollers in the table: 1 Control type: PLC control Dimension display on spindle: mechanical numerical display Infeed rollers in front of planer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Storage location: Nattheim Lhjdpfowwwkhox Ab Uen

Condition: good (used), Scope of delivery includes: 01x rail / track, used Rail profile: S41-10 Total length: approx. 12,000 mm Width: approx. 125 mm Height: approx. 140 mm Lhjdpoxg Rfnefx Ab Uen Head: approx. 67 mm Web: approx. 12 mm Weight: approx. 480 kg / pc. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These costs can be provided separately depending on the delivery location and scope.

Condition: used, tank capacity: 1,500 l, GENERAL Design: vertical Heating/cooling: available Insulation: available Max. allowable operating temperature: 145 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.5 bar Agitator: beam agitator Base design: feet Location: outdoor storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,500 liters Lhsdpfxsxqahyo Ab Usn Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: milk VESSEL Max. operating temperature of vessel / °C: 145 °C EQUIPMENT Manhole/dome: in the top Outlet: available

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm Lhjdpfx Aevbh Rhob Uon lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: used, mileage: 9,369 km, power: 265 kW (360.30 HP), first registration: 04/2024, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, with Rotorcleaner ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7-color display and navigation, LGS IV, Twin Engine 1-0905, 9m³ container, dirt chute 350mm, feed brush, sweeping unit with integrated drive roller, LED work lights, coarse dirt collection, flap valve via inlet pipe, suction option at the rear with 340 liters, additional water tank 1500 liters, Rotorvlean, total water volume 3820 liters, adjustable speed for feed brush, dual sweeping unit, suction mouth 600mm, sweeping unit sideways shiftable 400mm, high pressure system 280 bar at 74 L water per minute, high pressure system behind suction mouth and feed brush, front disc brush, hand suction hose Lhodpfx Aourd Nkob Uon

Condition: used, Technical details: throat min.: 2600 mm Lhodpou Nlqfofx Ab Uen throat max.: 4200 mm Support arm position: 360 schwenkbar / swiveable ° weight of the machine ca.: ca. 1,5 t Welding stand for positioning of a welding torch / welding source on big work pieces - diameter of frame = 1480mm - all adjustments have to be proceeded manually On sale without welding source. i.D. *

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device Lsdpfeu Nwyrjx Ab Ujhn - Hose package water cooled (4,0Meter) *

Year of construction: 1992, condition: used, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm Lodpfxju Nvgde Ab Ujhn total power requirement: 2,3 kW Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes *

Condition: used, 5tSWF Krantechnik GmbH Ledpjdc A R Tsfx Ab Uohn