Used Beam Hall for sale (5,782)

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm Chodpfek Utrwex Ab Tof air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet Cedpfxscbq Nws Ab Tohf 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: excellent (used), Complete steel structure of the production hall. Cedpfxsxu E Igj Ab Tohf Dimensions - 31.5 x 30 x 9.85 m with the corresponding ROOF sandwich panels made of insulating panels. NOTE - hall is WITHOUT WALL PANELS The hall was built in 2010. In excellent condition! The total weight of the structure is approx. 60 tons. The structure is protected with primer and varnish. The outer columns are made of IPE 500 profile, and the middle one is made of IPE 600. The hall has preparation for a crane track. A project and static calculation have been made for the hall. The hall has been disassembled and transportation and loading can be arranged.

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Cjdpehvm Dijfx Ab Tjhf Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes

Condition: used, mileage: 46,284 km, power: 294 kW (399.73 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, operating hours: 2033 ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7- color display and navigation, LGS IV, two engine variant with built-in engine JCB 129 kW level 3b, front disc brush - sideways shiftable, double-sided sweepings pickup, HD washing system 200 bar, hydraulic suction hose boom at the rear, gross volume 9 m³, water system approx. 4320 liters, weed brush preparation, container 9 m³ volume, built-in engine JCB 129kW/level 3b, feeder brush fixed 5 x 1300mm, total water volume 4320 liters, fuel tank 350-400 liters, coated suction nozzles double-sided, 15m hose reel, 200 bar 106l/min, rear area observation, rear suction hose Cedet Hcfgopfx Ab Tehf

Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Chedpexqc S Usfx Ab Tsf Design: vertical Remarks: Insulation covers the top and cylinder, not the lower bottom; spray head connection slightly bent and weld seam on top cover torn; outlet pipe internal diameter approx. 50 mm, widens to approx. 65 mm at its cut end Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Insulation: present Power: 1.5 / 2.2 kW Agitator: bar agitator Agitator component: agitator flange Base type: height-adjustable feet Location: Bremen Volume: 14,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Previous use: dairy TANK Number of feet: 4 pieces INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL PROPERTIES Feet material: stainless steel AGITATOR Voltage: 400 V Bottom bearing: AGITATOR 2 Agitator position: mounted laterally on cylinder

Condition: new, Year of construction: 2025, flue capacity: 350 kW Conventional yeld capacity: 279 kW flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm Csdpfxsk Utrto Ab Tshf heater length: 1900 mm weight: 850 kg

Condition: used, tank capacity: 550 l, GENERAL Equipment: Venting/inlet and outlet, disc valve Design: upright Speed: 0 - 85 RPM Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top cover: agitator traverse with hinged lid Csdpfx Aoxqc S Ijb Tehf Agitator: bar agitator Base design: PE base Location: Bremen Technical documentation: Drawing, CE marking and declaration of conformity, assembly manual, operating manual Nameplate: Volume: 550 liters Product-wetted material: V2A 1.4301 (AISI 304) Condition: brand new Cylindrical height: 1,034 mm TANK Max. operating temperature of tank / °C: 80 °C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Foot material: plastic AGITATOR Voltage: 400 V Agitator arrangement: off-center in top cover Agitator features: NORD frequency converter 400 V IP55 NORD helical gear unit with state-of-the-art aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit with food-grade Klüber oil filling Gear motor without paintwork

Condition: new, Year of construction: 2025, flue capacity: 34 kW Conventional yeld capacity: 29 kW flue diameter: 160 mm hot air delivery pipes: 2 x 180 mm flue length: 500 mm oven width: 400 mm Chjdek Utrajpfx Ab Tof oven hight: 590 mm air flow: 2200 m³/h power consumption: 400 W aproximate surface to heat up: 500 m³ area to be heated: 100/150 m² heater height without hot air conveying pipes: 1560 mm heater width : 550 mm heater lenght: 920 mm weight: 190 kg

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Minor dents in the insulation jacket Speed: 42 rpm Outer diameter: 2,100 mm Inner diameter: 2,000 mm Total height: 4,550 mm Insulation: available Power: 2.2 kW Agitator: beam agitator Mounting type: feet Location: Bremen Volume: 8,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: dairy TANK Number of feet: 3 INSULATION Insulation jacket: hermetically welded Cjdexqc Szopfx Ab Tehf Insulation jacket material: stainless steel EQUIPMENT Manhole/Dome: in the top Outlet (alternative entry): 65 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator arrangement: eccentric in the top

Condition: new, Year of construction: 2025, Firing chamber output: 49 kW Working power: 45 kW New appliance, original packaging: yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 200 mm with freely rotatable plug-in bends Chsdpek Utrdsfx Ab Tef Smoke outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air flow : 3500 m³/h Power consumption: 550 W designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without hot air conveying pipes: 1750 mm Oven width: 700 Oven length without flue gas fan: 1150 Weight: 305 kg

Condition: used, tank capacity: 118,000 l, GENERAL Design: upright Outer diameter: 4,700 mm Inner diameter: 4,410 mm Total height: 10,860 mm Insulation: available Max. overpressure: 0.99 bar Agitator: beam agitator Support type: support ring Location: Kundl (Austria) Technical documentation: drawing Nameplate: Vacuum: 0.25 bar Volume: 118,000 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,500 mm TANK Ends: dished heads (Klöpper heads) INSULATION Insulation jacket: riveted EQUIPMENT Manhole / Dome: in the cylinder, in the top head Outlet: Flange DN100 AGITATOR Cedpfx Aoxqb Twjb Tehf Bottom bearing: Agitator arrangement: centrally in the top head

Condition: new, Year of construction: 2025, combustion chamber power: 175 kW Working power: 140 kW Diameter smoke outlet: 200 mm Hot air delivery pipes: 1 x 500mm Firebox length: 950 mm Firing chamber width: 600 mm Firebox height: 860 mm Codpfx Aji Hplrjb Tjhf Air delivery : 8900 m³/h Power consumption : 3500 W designed for room volume : 3000 m³ area to be heated: 500/600 m² furnace height without hot air conveying pipes: 2200 mm Furnace width: 930 mm Furnace length without flue gas fan: 1700 mm Weight: 615 kg

Condition: used, tank capacity: 1,023 l, GENERAL Equipment: Venting/filling valve, ball valve Design: Container Remarks: Frame steel (galvanized) Rotational speed: 97 rpm Internal diameter: 1,080 mm Total height: 1,950 mm Power: 0.75 kW Agitator: Beam agitator Support type: Frame Location: Bremen Technical documentation: Drawing, installation declaration according to the EU Machinery Directive, assembly instructions Nameplate: Volume: 1,023 liters Codpexqbunofx Ab Tohf Contact material: V2A 1.4301 (AISI304) Condition: Factory new Cylindrical height: 1,000 mm TANK Max. operating temperature (tank) / °C: 80 °C EQUIPMENT Manhole/dome: in the top cover, handhole Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Surface outside: Mill-finish IIIc AGITATOR Voltage: 400 Volts Agitator position: Centered in the top cover

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 2 tanks (6169-3+5) with broken intermediate flange at the gearbox Csdpfxjxqbuhe Ab Tshf Speed: 26 - 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-protected (compliance with applicable ATEX regulations on site must be checked) Overall height: 4,200 mm Heating/Cooling: Available Power: 6.8 kW Max. admissible operating temperature: 60 °C Max. admissible operating overpressure: 10.0 bar Seal type: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Base type: Ring Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Double jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4541 (AISI 304) Product contact material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 1,750 mm Previous application: Chemical industry TANK Max. operating temperature / °C: 60 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole/Dome: In top head Outlet: Flange DN80 Note: Slight residues MATERIAL SPECIFICATION Material of feet: Steel AGITATOR Manufacturer: Ekato Voltage: 380/660 Volt Interference suppressor: Agitator arrangement: Centrally in top head TECHNICAL DATA / DIMENSIONS Bottom thickness: 5.4 mm Top head thickness: 9.0 mm

Condition: used, tank capacity: 8,000 l, GENERAL Codpfx Asxqbrmeb Tjhf Equipment: Crane lugs Design: Suspended Remarks: 3 claws made of V2A Speed: 61 rpm Inner diameter: 2,100 mm Total height: 5,500 mm Power: 22 kW Agitator: Beam agitator Stand type: Claw feet Location: Bremen Nameplate: Volume: 8,000 liters Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,500 mm Last application: Chemicals EQUIPMENT Manhole/Dome: In the top head Outlet: Flange DN100 Note: Light residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 Volt Agitator arrangement: Centrally on the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 8 mm

Condition: used, Year of construction: 2000, tank capacity: 6,779 l, GENERAL Design: suspended Year of manufacture: 2000 Remarks: Support ring made of Fe Speed: 114 rpm Inner diameter: 1,800 mm Total height: 4,550 mm Power: 37 kW Agitator: beam agitator Cjdpoxqbp Ssfx Ab Tjhf Base type: ring cut off Location: Bremen Name plate: Volume: 6,779 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,200 mm Last use: chemical industry EQUIPMENT Manhole/dome: on top head Outlet: flange DN100 Note: light residues, manhole cover missing AGITATOR Agitator manufacturer: Fluid Voltage: 400/690 Volt Agitator arrangement: centrally mounted in top head

Condition: used, tank capacity: 16,000 l, GENERAL Equipment: Crane lugs Design: vertical Speed: 19.9 rpm Inner diameter: 2,480 mm Total height: 4,900 mm Power: 5.5 kW Agitator: beam agitator Support type: legs Location: Bremen Technical documentation: drawing Nameplate: Volume: 16,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Last application: water-based paint TANK Number of legs: 3 pcs EQUIPMENT Manhole / dome: in cylinder, in top head (DN 500) Outlet: flange DN125 Note: slight residues, dents on cylinder MATERIAL SPECIFICATION Leg material: stainless steel Chsdpfoxqbplox Ab Tjf AGITATOR Voltage: 380 Volt Bottom bearing: Agitator arrangement: centered in top head

Condition: used, tank capacity: 17,300 l, GENERAL INFORMATION Construction type: vertical Remarks: 1 tank (internal no. 7081-3) with a minor dent and a cut-off connection on the top head Speed: 47 / 95 rpm Internal diameter: 2,900 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 5,100 mm Power: 17 / 27 kW Agitator: beam agitator Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates Nameplate: Volume: 17,300 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Previous application: paint industry TANK Max. operating temperature tank / °C: 100 °C Specific gravity of medium (t/m³): 1.2 (t/m³) Number of feet: 4 pieces EQUIPMENT Manhole / dome: on top head (DN 600), handhole Outlet (alternative spec): 50 mm Note: minor residues MATERIAL SPECIFICATION Material feet: steel AGITATOR Voltage: 400 Volt Agitator position: centrally on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Cedpfxsxqbmwj Ab Tjhf

Condition: used, tank capacity: 17,200 l, GENERAL Design: vertical Remarks: Some outlets partially cut off; 1 vessel (internal no. 7083-2) has 1 dent in the cylinder Speed: 47 / 95 rpm Internal diameter: 2,508 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 6,000 mm Power: 17 / 27 kW Agitator: Paddle agitator Mounting type: feet Location: Bremen Technical documentation: Drawing, TÜV certificates Nameplate: Volume: 17,200 liters Wall thickness, cylinder: 4.0 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,750 mm Last application: paint industry VESSEL Max. operating temperature vessel / °C: 100 °C Specific weight of medium (to/m³): 1.2 (to/m³) Number of feet: 4 pcs EQUIPMENT Csdexqbmkspfx Ab Tshf Manhole / dome: on top head (DN 600), handhole Outlet (alternative entry): 50 mm Note: minor residues MATERIAL SPECIFICATION Material of feet: steel AGITATOR Voltage: 400 volts Agitator location: centrally on the top head TECHNICAL DATA / DIMENSIONS Wall thickness, bottom: 3.5 mm Wall thickness, top head: 4.0 mm

Condition: used, Year of construction: 2002, tank capacity: 8,640 l, GENERAL Equipment: Ventilation/inlet and outlet air, lifting lugs Design: vertical Year of manufacture: 2002 Remarks: Agitator shaft cut; welded screws on outer tank surface (see photos); 1 internal pipeline; cylindrical manway approx. 340 x 440 mm Speed: 14 / 30 rpm Internal diameter: 1,980 mm Total height: 4,200 mm Power: 1.2 / 2.2 kW Agitator type: paddle agitator Mounting type: height-adjustable legs Location: Bremen Nameplate: Volume: 8,640 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: lubricant production TANK Number of legs: 3 units EQUIPMENT Manway / access port: in cylinder, in top head (DN 500) Outlet (alternative input): 50 mm Note: slight residues, outlet end cut off MATERIAL QUALITY Material of legs: stainless steel Cedpsxqbkiefx Ab Tehf AGITATOR Voltage: 400 Volt Agitator position: centered in top head

Condition: used, tank capacity: 1,000 l, GENERAL Design: vertical Remarks: Vessel flange made of Fe; manway cover plated Speed: 48.5 / 97 RPM Internal diameter: 1,200 mm Total height: 3,750 mm Heating/cooling: available Power: 4.5 / 5.5 kW Max. allowable operating temperature: 149 °C Max. allowable operating overpressure: 6.0 bar Max. excess pressure: 0.50 bar Top head: removable / hinged top head Agitator: blade agitator Support design: feet Location: Bremen Jacket temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 1,000 liters Jacket volume: 80.0 liters Cylinder wall thickness: 3.9 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 850 mm Last application: chemical VESSEL Max. operating temperature vessel / °C: 143 °C Number of legs: 4 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: handhole Outlet (alternative entry): 85 mm Chjdjxqbawjpfx Ab Tjf MATERIAL SPECIFICATION Material legs: steel AGITATOR Agitator manufacturer: Ekato Voltage: 380 Volt Agitator positioning: centered in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.3 mm Top head wall thickness: 5.1 mm

Condition: used, tank capacity: 6,510 l, GENERAL INFORMATION Design: suspended Remarks: Several connections were modified by the previous operator (not documented in TÜV papers); vessel is mounted on 3 lugs made of Fe (not 4 as shown in the drawing); heating coil in the cylinder only in the lower area; insulation jacket with sheet metal cutouts and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/Cooling: available Insulation: available Power: 5.5 kW Max. permissible operating temperature: 165 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: beam agitator Support type: lugs Location: Bremen Technical documentation: drawing, TÜV papers Chedsxqbaqepfx Ab Tef Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 liters Double jacket volume: 34.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Previous application: ethanol VESSEL Max. operating temperature vessel / °C: 165 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminum EQUIPMENT Manhole / dome: in top head (DN 600) Outlet: flange DN65 Note: minor residues present AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 Volt Strain reliever: Agitator arrangement: central, in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Top head wall thickness: 8.0 mm

Condition: used, Year of construction: 2007, tank capacity: 29,000 l, GENERAL INFORMATION Design type: vertical Year of manufacture: 2007 Notes: Manhole diameter top head: approx. 700 mm; manhole diameter cylinder: approx. 500 mm; Rotational speed: 40 rpm Outer diameter: 3,200 mm Inner diameter: 2,980 mm Total height: 6,800 mm Heating/cooling: available Power: 75 kW Max. overpressure: 0.6 bar Agitator: beam agitator Base type: feet Location: external storage Technical documentation: drawings, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 3,368 mm Previous use: adhesive production Csdexqat Nopfx Ab Tehf TANK Max. operating temperature tank/°C: 100°C Specific gravity of medium (to/m³): 1.3 (to/m³) Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: on the cylinder, on the top head Outlet (alternative entry): DN 125 mm AGITATOR Agitator manufacturer: PRG Voltage: 400 V Bottom bearing: Agitator arrangement: centered in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 9 mm Top head wall thickness: 7 mm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: Vertical Outer diameter: 890 mm Inner diameter: 650 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Max. allowable operating temperature: 135 °C Max. allowable operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top head: Removable / hinged top head Agitator: Beam agitator Support type: Feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 550 liters Double jacket volume: 67.0 liters Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical TANK Max. operating temperature of tank / °C: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Flow breaker: Chedpfx Absxqaqns Tef Agitator arrangement: Centered in the top head Agitator details: Agitator data not legible