Used Battery Strapping Tool for sale (46,116)

Condition: good (used), Year of construction: 1987, Tool milling machine DECKEL FP 4NC, No. 2810-0564, year of manufacture 1987, table size 700 x 430 mm, travels XYZ = 500 x 500 x 600 mm, control GRUNDIG Dialog 4 Dodpoyhqtvefx Ac Nocc

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, overall weight: 345 kg, warranty duration: 24 months, water tank capacity: 70 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery Drive: Traction motor Brush working width (mm): 510 Dsdpfx Aoxn I Suec Nscc Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area coverage (m²/h): 2805 Battery (V / Ah): 24 / 105 Charger power supply (V / Hz): 95 – 253 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER 900mm V-shaped suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy operation thanks to a small number of yellow-coded controls. - Robust construction with integrated disc brush head. High surface performance thanks to a large working width. Brush changes are made via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model, powered by powerful 105 Ah batteries, as a viable alternative to walk-behind machines (batteries and a suitable charger are included).

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Dcjdpexpwfgefx Ac Noc Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Dsdpfx Acexyc Tko Nscc Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: excellent (used), Please read the technical specifications in full. If the machine is of interest to you as an investment, we kindly request your complete identification including a correct telephone number and email address before submitting an offer. DECKEL Tool Milling Machine FP 1 No. 2101 Dcodpsxyc N Esfx Ac Nec with HEIDENHAIN 2-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z-axis: 1,200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Vertical head swivels: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. - 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 - Stepless feed on X/Z-axis - The machine received a partial overhaul by a specialist company a few years ago. Equipment: - 2-axis digital readout HEIDENHAIN - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available upon request! Condition: Good to very good from training facility Available from March 2026

Condition: excellent (used), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full credentials, including a correct phone number and email address, in order to provide an offer. Milling Machine Macmon M100 (comparable to Deckel FP1) Speed range: 40-2000 rpm Travel X-axis: 310 mm Travel Y-axis: 170 mm Travel Z-axis: 340 mm Tool holder: SK 40 Drawbar thread: S20x2 Dcsdpewu Egxjfx Ac Noc Table clamping surface: 600 x 215 mm T-slot size: 12 mm Weight approx. 1,120 kg Dimensions: 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine lamp - 3-axis digital readout - Coolant system - Operating manual - Machine feet The machine has been technically inspected and is in good condition. Backlash X-axis: 0.1 mm Backlash Y-axis: 0.1 mm Backlash Z-axis: 0.2 mm Net price ex works, loaded from stock.

Condition: excellent (used), SK 50 holders 60 pieces (28529) Weight 275 kg Dcsdpfx Ajt Uztlsc Nec

Year of construction: 2026, condition: new, functionality: fully functional, construction height: 3,500 mm, operating pressure: 6 bar, construction width: 14,000 mm, laser power: 6,000 W, working length: 4,000 mm, workpiece diameter (max.): 1,200 mm, number of axes: 8, laser type: diode laser, laser source manufacturer: Laserline, number of tool turrets: 1, Machine Description Dcjdpfx Asyhhudsc Nec The system offered is an adaptive, robot-assisted laser welding cell designed for high-precision machining of large-format metal components. The cell is based on a modular machine platform and is engineered for demanding industrial applications in both additive and subtractive laser processing. This system is specially designed for the processing of rotationally symmetrical workpieces as well as complex welding, repair, and build-up operations on large metal parts. By combining powerful robotics, intelligent control software, and integrated sensor technology, the cell enables reproducible, automated, and cost-effective production. System Configuration & Mechanics - Large-format, enclosed laser cell with safety housing - Robot-guided laser welding system with high payload and extended reach - Integrated rotary positioner for continuous 360° workpiece processing - Engineered for heavy workpieces (several tonnes in weight, depending on configuration) - Ergonomic loading and unloading via large access doors Laser & Process Equipment - High-performance laser welding head for precise welding and build-up applications - Supports additive processes (e.g., cladding, repair welding) - Optional combination with additional laser or plasma processes possible - Automated tool or process head changeover (configuration dependent) Adaptive Control & Software - Integrated CAD/CAM system for automatic generation of machining programs from 3D STEP files - Collision-monitored simulation of all robot movements and tool paths prior to processing - Offline programming with digital process validation - Automatic adjustment of process parameters during operation Sensor Technology & Process Monitoring - 3D seam tracking sensor for real-time path correction - Compensation for component tolerances and thermal expansion - Continuous process monitoring for high seam quality and repeatability Typical Application Areas - Laser welding of large steel and metal components - Additive repair and refurbishment of large parts - Cladding and build-up of functional surfaces - Manufacturing and post-processing of rotationally symmetrical components - Heavy industry, mechanical engineering, energy and turbine construction System Advantages - Fully automated machining instead of manual welding processes - High process reliability through simulation and sensor technology - Significantly reduced setup and commissioning times - High flexibility regarding variants and component geometries - Cost-effective alternative to replacement of large components

Condition: used, Year of construction: 2020, Console / table Horizontal clamping surface (L x W) mm 315 x 710 T-slots (number / width / distance) mm 5 / 14 / 63 Spindle / table distance mm 100 - 450 Max. table load kg 200 Travel, automatic / manual Longitudinal travel (X-axis) mm 400 Transverse travel (Y-axis) mm 315 Vertical travel (Z-axis) mm 350 Vertical milling spindle Spindle holder DIN 2080 ISO 40 Spindle speeds rpm 80 - 3,000 Pivoting degrees +/- 45 Quill stroke, manual mm 80 Feed rates Rapid traverse (X/Y/Z) m/min 5 / 5 / 2.5 Feed rate (X/Y/Z) mm/min 2,000 Drive power Total power kW 7.5 Dcedpfju Tfgxsx Ac Nsc Machine dimensions and weight Length mm 1'520 Depth / width mm 2,130 Height mm 1'950 Weight kg 1'700

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Dcsdor Ha Dvspfx Ac Njc Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,451 h, load capacity: 2,500 kg, lifting height: 5,900 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 620 Ah, battery voltage: 72 V, fork length: 700 mm, overall weight: 6,100 kg, empty load weight: 6,100 kg, total height: 2,800 mm, total length: 1,700 mm, total width: 3,150 mm, maximum load weight: 2,500 kg, fuel: electricity, Equipment: adjustable boom, front guard, lighting, pallet forks, The battery has been reconditioned and has an efficiency of 81%. Only 1451 hours. We sell forklifts after a full service. Prepared for the end user. Ready to use. Dedpfx Aceyhf Rcj Nocc We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition Djdpfx Aoyhf Iuoc Necc We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Year of construction: 2024, operating hours: 20 h, condition: like new (used), functionality: fully functional, Holtec package cross-cut saw Vario CUT with HMC-B automatic control. With automation. Mosca strapping machine. Disposal system. HIT automatic squared timber feed with timber magazine and groove milling unit. 4-meter carriage. Absolutely as new. Only used for trial operation. Complete description upon request. Dcedsyhdkbopfx Ac Njc

Year of construction: 2024, operating hours: 20 h, condition: like new (used), functionality: fully functional, Holtec package cross-cut saw Vario CUT with HMC-B automatic control. With automation. Mosca strapping machine. Disposal system. HIT automatic squared timber feed with timber magazine and groove milling unit. 4-meter carriage. Absolutely as new. Only used for trial operation. Complete description upon request. Dcedpfx Acjyhdiqo Nsc

Condition: good (used), Year of construction: 2012, Matec 30 L, year of manufacture 2012, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-tool magazine, full enclosure of working area, direct measuring systems, chip conveyor, bellows with steel laminations, 3D probe, laser measuring system. Djdpfoyhcm Uex Ac Necc

Condition: used, Year of construction: 2017, Measuring range Z 420 mm Measuring range D 420 mm tool taper SK 50 weight approx. 215 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical specifications & accessories: Dedpfsyfw Dpsx Ac Nocc - SK 50 to SK 40 adapter Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofit tool milling machine with 3-axis Heidenhain digital readout. The machine is in good condition and comes from a training department. Fixed table, extended milling head, SK 40 spindle taper. Accessories include various collets and arbor holders. Good, operational condition. Can be demonstrated under power by arrangement. Dedpfx Acjyhbn Ro Nocc

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Djdpol Dvx Esfx Ac Nocc Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: used, functionality: fully functional, Speroni STP Tool Presetting Device with PC & Software Condition: used. Excellent condition. The Speroni STP tool presetting device is a professional measuring and presetting system for rotary tools used in CNC machining. With its precise optics, robust mechanics, and user-friendly software, it enables fast and highly accurate presetting of tool lengths and diameters before being loaded into the machine. This unit comes equipped with a complete PC system including monitor and software, and is ready to use immediately. Technical details: - Manufacturer: Speroni S.p.A. (Italy) - Model: STP Essentia / STP Magis (depending on configuration) - Type: Tool Presetting Device Equipment: - Precision measuring column with camera unit - Monitor and PC system (Dell) Dcsdpfx Ajxwp D Rjc Nsc - Keyboard and mouse - Presetting software with tool data display Measuring range: - X-axis: up to approx. 400 mm - Z-axis: up to approx. 400 mm - Spindle interface: ISO / HSK-compatible (interchangeable) Additional features: - Precise tool measurement outside the machine - Increases machine uptime and productivity - Durable construction and premium optics - Intuitive software interface - Ideal for CNC machining, toolmaking, and production The original invoice can be seen in the documents below.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like. Dcodpfx Acou Ez Hus Njc

Condition: used, - Model: PLT-C - Capacity: 300 kg (for dough with a water absorption rate of 65%) - Hydraulic bowl lifting - 2 removable bowls - With programmable touchscreen control panel - Serial number: 4945 - Manufacturing date: June 15, 2009 - Weight: 1900 kg - Installed power: 25 kW - Current: 31 A - Frequency: 50 Hz - Auxiliary control: 24 V - Voltage: 400 V - Two inverters for independent control of the scraper and tools - Tool rotation and reverse rotation - Fast incorporation and gentle distribution of inclusions - Patented oil-free planetary tool drive system - Wide selection of quick-release mixing utensils designed for a variety of dough types and preparations Dodpfeyg Ehrsx Ac Nocc - Option for intensive mixing under pressure for uniform and optimal product aeration - Available with double-jacketed bowl for water and/or steam heating/cooling - Easy cleaning with CIP (Cleaning In Place) option - Effective scraping of the bottom and sides of the mixing bowl

Condition: good (used), Year of construction: 2000, Lot of boring tools for boring mills Manufactured by Gildemeister-Microbore - Komet Djdpfx Aswd Tkkoc Nocc Spindle mount ISO-BT 50 MK 5 In good condition.

Year of construction: 2000, condition: good (used), Contributed tool holder VDI 60 / ATC For large CNC lathes RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG etc. WOHLENBERG etc. 2.piece . SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC Dodpfx Ajh Iz Dujc Nscc 1.piece . SAUTER 0.5.921.106072.814 No.3 with ATC 1.piece . WENDEL 214.060/A3820 No.4 with ATC 2.piece . MULTIFLEX 252.71.566 No.5 and 6 Without ATC In good condition.

Year of construction: 1992, condition: used, 2.Werkzeugrevolver Fabr.SAUTER type: 0.5.480.525 Dcsdpjdg Tixefx Ac Nec with 8 positions VDI 50 shots with control unit EK 400 Are of vertical lathes.

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Also fits SAUTER tool turrets with VDI 40 holder. 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Dsdehwnfkspfx Ac Njcc Price per piece 600,-€ 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€