Battery strapping tool buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4

Strapping tool TECNA 9357

Lager SolingenGermany dealership location
6408 km
2016
used
weight max. in kg 18 kg Fhkbpri2g more
2
consisting of: 1-part tensioning and sealing apparatus sealing sleeves strap 16 mm wide trolley for coil diameter max. 600 mm - 150 mm wide width / depth / height = 600/400 / 1,040 mm 40 kg Xozhtn2pk more
6

Strapping tool Titan

D - Nordrhein-WestfalenGermany dealership location
6469 km
used
Technical information we answer more via phone or email Fe3wbur more
2
Freleedw Steel strapping Handtool Pneumatic tensioning and closing for straight-surfaced packages. more
6

strapping tool A.V.M van den Berg GmbH HSW-S 20

D - Nordrhein-WestfalenGermany dealership location
6469 km
2001
used
technically and visually very good machine. Is power and can be tested at any time in the normal. Xfqp9wetu more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glyb937dw AMERICAN TOOL INC. 2516-24F3 32" x 120” Engine Lathe Specifications: -- Swing over bed ways 33-1/2". -- Swing over carriage wings 24”. -- Swing over cross slide 24". -- Distance between centers 120". -- Number of spindle speeds 27. -- Spindle speeds 12 - 800 rpm. -- Length on bed 32-5/8”. -- Spindle hole 2-1/2". -- Headstock center #5. -- Radial load at 100 rpm front bearings 27,800 lbs. -- Spindle mount l2. -- Sp... more
11
"AS NEW" ONLY 3600 HOURS - HIGH PRECISION UNIVERSAL GRINDER S20-2 TOOLROOM EXTERNAL CYLINDRICAL GRINDER WITH INTERNAL READY (ANOTHER S20-2 400MM CENTRES WITH EXTERNAL+INTERNAL +ACCESSORIES ALSO AVAILABLE BY SEPARATE NEGOTIATION) ***** ***** 650MM CENTRE DISTANCE x 100MM HEIGHT, SWIVELLING TABLE AND WORKHEAD, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, SONY DIGITAL SCALE READ OUT IN X AND Z AXIS. PLEASE NOTE *****MACHINE AVAILABLE TO END USER... more
9
Toolroom Lathe AI Hembrug DR133 Centre distance: 700mm Centre height: 135 Spindlebore: 36 Spindelspeeds: 56-4000 With set of collets 1-18mm Gvm9nwsyi Multifix QCTP with 4 toolposts New 3-Jaw and 4-jaw scroll chuck incl. inner outer and soft jaws Changegears Very good condition more
3

Toolcupboard

MönchengladbachGermany dealership location
6371 km
used
length:650 mm width:600 mm height:800 mm Fq2exi208 weight approx.:50 kg more


battery st...
every day

New machines via email!

Be informed!
5

Tool Grinder - Universal Pedersen USL

Bünde bei BielefeldGermany dealership location
6460 km
used
max. grinding diameter 150 mm grinding length 650 mm workpiece length 800 mm table surface area 140 x 920 mm Drive 0,70 / 0,85 kW spindle taper MK 4 weight of the machine ca. 460 kg dimensions of the machine ca. 1,25 x 1,3 x 1,4 m Condition: ready for operation W7tcy3jzk Condition: good Electric 380 Volt Dividing apparatus with tailstock Universal tool grinding machine with a NEW dividing head with tailstock. Machine dealer with own stock of 2500 m² and certification of the database... more
1
Elect./Voltage: 39lyxkhx SUPERMAX MAX 8 VERTICAL MACHINING CENTER -- Table Size: 67" x 25" -- Spindle Nose to Table Top: 7.87" - 35.43" -- X Axis Travel: 64.96" -- Y Axis Travel: 27.56" -- Z Axis Travel: 27.56" -- Rapid Traverse Rate(X & Y): 590 IPM -- Rapid Traverse Rate (Z): 472 IPM -- Cutting Feed Rate: 196 IPM -- Spindle Speeds: 4,000 RPM -- Spindle Taper: CAT 40 -- Spindle Motor: 15 HP -- Tool Changer Capacity: 30 Stations -- Max Tool Weight: 22 lbs. -- Approx. M... more
5

Tool taper DIXI W75 128/4

TönisvorstGermany dealership location
6366 km
used
conus taper 0 mm Xwuhkv9rq with milling disc. more
11
Toolroom milling machine Mikron WF2/3 S Travels XYZ: 400-400-375mm Spindeltaper: Iso 40 Spindelspeeds: 50-2240 Jvt3sy27 Tablesize: 350x800mm With angle table Quill Iso 40 Digital readout Heidenhain Quill Coolant pump Very nice machine more
3

tool presetter ZOLLER H 420 D

MönchengladbachGermany dealership location
6371 km
1998
used
measuring range X-axis:300 mm measuring range Y-axis:400 mm Table dimensions:450 mm tool diameter:ISO 40 mm amplification -fold:150/20 weight:0,5 t total power requirement:1,5 kW dimensions of the machine ca.:1,8 x 1,0 x 1,8 m 9nvxpki29 Machine with indexing device for ISO 40 and collet clamping - pneumatic saddle and tool clamping - measuring computer with screen and printer more
6

Tool and Cutter Grinder SCHÜTTE WU63-CNC

Lager Mülheim/RuhrGermany dealership location
6390 km
used
max. grinding diameter 260 mm Ixojodbv grinding length 610 mm workpiece length 680 mm y-axis 230 mm z-axis 280 mm centre height 115 mm swing dia. 260 mm total power requirement 1,3 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,7 x 1,8x 1,8 m YOM in mid 1990, in 2010 completely modernized with new CNC control - speed of the workpiece (division) 1-100 rpm - number of divisions max. 999 - Feeds X axis 0.1 - 12,000 mm / min - Feeds Z axis 0.1 - 2000 mm / min - Solution in X... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 33pmk0gb SUPERMAX TOOLS SUPERBRUSH 36X2 Dual Head Brush Sander;SUPERBRUSH applications include, but are not limited to: White wood sanding, de-nibbing, sealer, and primer sanding applications, as well as UV roughing and reclamation projects. De-burring, graining, and polishing of steel, stainless steel polishing and aluminum finishing and solid surface materials. These sanderr are well suited to shutter sanding, de-glossing and [...]: -- 36" Sanding width,... more
3

tool presetter KELCH 200 P

DreieichGermany dealership location
6568 km
1972
used
measuring range Z-axis 200 mm measuring range X-axis 80 mm Mbwr3r8 tool taper Zyl. Ø60/Ø18 mm mm table-size 480 x 290 mm more
2

Kneading Tool Kemper SP 50

BabenhausenGermany dealership location
6588 km
good (used)
Knetspirale kneading tool Wwv9wsrdo Spiral for Kemper Spiral Model: SP 50 stainless steel More Knetspiralen upon request! more
4

tool presetter ZOLLER H 620 Magnum

MönchengladbachGermany dealership location
6371 km
1996
used
measuring range X-axis:600 mm measuring range Y-axis:300 mm Table dimensions:d. 400 mm tool taper:ISO 40/50 total power requirement:1,5 kW weight:0,4 t dimensions of the machine ca.:2,2 x 1,1 x 1,7 m Ibu7rx7r Machine complete with Computer, turntable, screens, label printer and various tapers more
6
width 1,200 mm height 600 mm Yxdvwwkzk depth 300 mm interior depth 245 mm 2 storage shelves 220 x 580 mm weight approx. 37 kg more
6

Heavy Duty Lathe XYZ Machine Tools XL 1200 x 3000

ab Lager Monheim am RheinGermany dealership location
6405 km
2009
used
turning diameter over bed 1200 mm turning diameter over slide rest 830 mm turning length 3000 mm spindle turning speed range 20 - 660 U/min rapid traverse longitudinal 7500 mm/min rapid traverse cross 5000 mm/min main drive motor 56 kW bed width 692 mm Control Siemens 840 D workpiece weight max. 6000 kg max. workpiece weight between centres 4000 kg faceplate 0 mm x-axis 750 mm spindle head A2-11 spindle bore 160 mm tailstock quill diameter 125 mm tailstock quill stroke 350 mm tailstock taper M... more
6
Suction Sweeper, ride-on sweeping machine, space Sweeper, Hall Sweeper Hako Jonas 1200E high discharge. Very agile machine. Please note video, because pictures say more like a thousand words. See the video below for the attached documents. Sweeping width 1150 mm Speed 8km / h Electric drive 4, 3kW Gradeability around 16% New battery 24V/420Ah, December 2017 Theoretical coverage 9200 m² / h Side broom hydraulically driven and adjustable speed Hopper 130 litres of hydraulic high dump ... more
4
grinding wheel diameter 180 mm max. no. of working stations 2 Stück grinding table areas 370 x 185 mm spindle turning speed range 800 / 2400 U/min total power requirement 0,7 / 0,85 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,33 x 0,74 x 1,3 m Condition: good Electric 380 Volt Machine on both sides with each 1 grinding table Grinding table tilt adjustment 15° Grinding stroke movem. of the tables by hand lever 9h22hoiai at the standard of the machine Machin... more
3

Toolholder UNBEKANNT

MönchengladbachGermany dealership location
6371 km
used
tool taper:50 tool clamping area: mm weight:0,04 t Cyn07h7x 18 arbors partly with cutters ISO 50 more
3
Maximum turning diameter 300 mm. Maximum swing 531 mm. Maximum spindle bore for bar work 51 mm. Spindle speed 5.000 Rpm. 33e7qdb8i Number of tools on turret 12/12 . Tool type Mazak VDI. CNC control Mazatrol T-plus. With driven tools and sub spindle complete with Gantry loader GL 100n and pitch feed work conveyor more
3
tool taper 0 shaft cross cut 30.00 tool taper 32x1,5 schrägverzahnt Mqejr ratio 1 : 1 turning speeds 4000 U/min li. und re. coolant EK total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Huge collection of window cutters for CNC SK40 taking for example SCM Manufacturer Leitz, profile-cut, the cutter mounted on SK40 recordings, can be mounted but also on other recording thorns like E.g. HSK63. According to the documents probably for IV66 euro fold and front doors Drawing numbers 161501195 and 161501196 But apparently for greater thicknesses of wood (approx. 74 mm) is part of the milling cutter on the third range A total of 70 milling heads, of which about 58 piece on SK4... more
4
x-travel 310 mm y-travel 170 mm z-travel 340 mm spindle head ISO 40 table-size 215 x 600 mm feeds 16, von 9-450 mm/min spindle taper SK 40 spindle turning speed range 50 - 2500 U/min Drive 1,4 / 2,3 kW switchgear cabinet weight of the machine ca. 900 kg dimensions of the machine ca. 1,1 x 1,1 x 1,3 m Condition: ready for operation Srbprw Angle table ( fixed ) Machinefeets 4 Vertical milling head with quill adjustment Electric 380 Volt Construction same as Deckel FP 1. Machine d... more
4

Toolholder Unbekannt

MönchengladbachGermany dealership location
6371 km
2014
used
tool clamping area: mm weight:0,04 t Bakbnnphzv workpiece diameter: mm Tool taper:CAPTO tool taper:ISO 40 100 ISO 40 NC tool holders with appr. 50 x C5 Capto, 5 x C6, 7 x C4. 10 x shaft bore and 15 expansion chucks For sale as package or individual more
5
Maximum swing 525 mm. Maximum swing over saddle 350 mm. Maximum turning diameter 300 mm. Maximum spindle bore for bar work 65 mm. Min/max distance between chuck of both spindles 535 mm. Bavelmktmu Spindle speed Main spindle 35-4000 r/pm. Spindle speed Sub spindle 35-4000 r/pm. Spindle speed driven tools 25-4000 r/pm. Number of tools on turret / Driven 12/12. CNC control Mazatrol PC Fusion CNC 640 T more
5

Tool Room Milling Machine - Universal J&W GJ 8140K

Stockstadt a. RheinGermany dealership location
6564 km
as good as new (ex-display)
x-travel:500 mm y-travel:350 mm z-travel:400 mm Rcxq8klri feed:10~500 (18) mm/min rapid traverse x + z axis:1200 mm/min :1200 mm/min. table surface area:800x400 horiz. mm table surface area:250x950 verti. mm table load capacity:400 kg t-slots (width x number x distance):8x14x45 main drive:3 kW weight of the machine ca.:ca. 2300 kg dimensions of the machine ca.:1820x1640x1710 mm Warranty: 12 months warranty material BRAND NEW CONVENTIONAL TYPE MILLING MACHINE > Standard ac... more
6
Collection of window cutters Leitz system Dufix length profiles, system exactly and tenon Manufacturer Leitz According to the documents probably for wood thickness 66 and 71 mm Beyhfh2 A total of 20 milling heads It's following Mills: Leitz 100067387 RZaoau 100067386 RSq 100067388 RKaoauq 100067389 RIsou 100062933 FZ 100062936 FS 100062940 FK 100062929 FI 100062943 FAsou 100062946 FAsou 100062944 FAlM 6 large and 3 small slices, extra cutters Including documentatio... more
6
max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor kW speeds of grinding spindle 2000 - 10000 U/min total power requirement 2,2 kW Mechanic: very good Optical condition: newly painted The machine can be viewed under current. operating key and instruction 486 HS 380 V, 50 Hz, with CEE plug u. Electric wire Color: repainting ligh.- u. traffic gray motorized height adjustment, axial grinding s... more
3

Toolholder UNBEKANNT ISO 50

MönchengladbachGermany dealership location
6371 km
used
tool clamping area:ISO 50 mm I9ddd2l weight:0,2 t - palette with 57 SK 50 NC arbors, system KAISER (DIN 69871 AD) with drawings knobs and coolant through center, partly with knife heads and other cutters. more
3
Maximum swing over saddle 420 mm. Maximum turning diameter 300 mm. Mscsv Maximum spindle bore for bar work 64 mm. Min/max distance between chuck of both spindles 870 mm. Spindle speed Main spindle 35-4000 r/pm. Spindle speed Sub spindle 180-4000 r/pm. Spindle speed driven tools 120-4000 r/pm. Number of tools on turret / Driven 12/12. CNC control Mazatrol T-Plus. more
3
x-travel 710 mm y-travel 600 mm z-travel 445 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 18 - 6300 U/min table-size Ø 630 mm table load 435 kg feeds -stepless- 2 - 6000 mm/min power capacity 9,5 kW quill stroke 80 mm coolant voltage 380 V total power requirement 20 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 2,15 x 3,80 x 2,40 m electric cabinet 1,60 x 0,70 x 1,25 m - Serial-No.: 2823-3054 - control: DIALOG 11 - with 4. Axis NC-rotary ta... more
3
tool adaptor 0-50 mm diameter of tools max. 100 mm turning speeds 0 U/min adjustment range: Grad Eemry2m more
5
grinding wheel diameter 300 mm no. of working stations 5 Stück cup wheel dimensions 300 x 50 x 110 mm number of wheels 4 + 1 Stück efective widths 60 mm grinding spindle speed 1450 / 2800 U/min Motor power per sanding unit 1,1/0,5 PS weight of the machine ca. 650 kg dimensions of the machine ca. 1,55 x 1,55 x 1,35 m Condition: ready for operation Cooling equipment - Size of the support table: 480 x 180 mm - Largest slipping to steel cross-section: 63 x 63 mm Kk2mcpef - Size of the disk... more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm rapid traverse:5 m/min Uwwj7xe3s spindle turning speed range:25 - 3150 U/min spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
3
Maximum swing 675 mm. Maximum swing over saddle 350 mm. Maximum turning diameter 300 mm. Maximum spindle bore for bar work 51 mm. 7sb7w0ngo Min/max distance between chuck of both spindles 575 mm. Spindle speed Main spindle 35-5000 r/pm. Spindle speed Sub spindle 35-5000 r/pm. Spindle speed driven tools 25-4500 r/pm. Number of tools on turret / Driven 12/12. CNC control Mazatrol PC Fusion CNC 640 T more
5

Toolholder HANKOOK SK 50

St. IngbertGermany dealership location
6503 km
used
tool taper:SK 50 weight: t tool clamping area: mm Yac3zkwfd more
3
tool adaptor SK 30 diameter of tools max. 100 mm turning speeds 0 U/min Eedathl adjustment range: Grad Several tool holders SK 30 with pin for Machining Center STEINEL. They can be combined individually. Price about 40% of original price. more
5
x-travel:800 mm y-travel:630 mm z-travel:500 mm Cppmloig feed stepless:1-7500 mm/min rapid traverse feeds:7500 mm/min tool cone:40 ISO spindle drive motor:10 kW turning speed range - spindle:20-4000 U/min Torque of spindles:630 Nm total connected load:25 kW weight of the machine ca.:5 t dimensions of the machine ca.:15 qm metrical version, 380V 50 Hz 3 phases: rotatary table ISS CNC as 4th CNC axis: : 100 % before loading warranty: none The machine is in very good condition (only one prio... more


battery st...
every day

New machines via email!

Be informed!

to

to

Change search
BATTERY STRAPPING TOOL
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close