Used Base for sale (6,538)

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Kodpfxsyq Irhj Ahvsdi Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: not inspected (used), functionality: unexamined, Year of construction: 2008, controller model: HMI PLC KAESER, pressure (max.): 8.5 bar, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum operating pressure: 8.5 bar Kdjdpfxeyq Hi Es Ahvji Air dryer Model: ABT 102 Max. operating pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7549

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, plate length: 2,800 mm, plate width: 1,300 mm, TECHNICAL DETAILS Max. panel width: 1,300 mm Max. panel length: 2,800 mm Kdsdpjyq E S Sjfx Ahvoi EQUIPMENT 180-degree panel tilting system The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6327

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table Kdjdpfx Ajyq Ez Tohvei • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Max. working height: 45 mm Kdedpfx Ajyq Ez Hjhvsi MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Kdjdpjyq Avhofx Ahvei Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Kjdpfjyqynusx Ahvjdi External reference: 7615

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Main saw blade diameter: 315 mm Maximum tool diameter: 315 mm MACHINE DETAILS Circular saw blade units: 1 Connected load: 4 kW EQUIPMENT Scoring unit Tilting function CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8118 Kdedpfx Aoyqyc Eshvei

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Kjdpjyqybuofx Ahvjdi Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil Kjdpfx Aheyqybhovedi EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Year of construction: 2006, condition: not inspected (used), functionality: unexamined, working width: 1,200 mm, working height: 1,600 mm, working length: 1,200 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,200 mm Maximum working length: 1,200 mm Maximum working height: 1,600 mm MACHINE DETAILS Total power: 1.5 kW EQUIPMENT CE marking, safety regulations The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection, and is responsible for the installation, securing, and operational use of the machine at the destination. Kdjdeyqx Ugspfx Ahvoi External reference: 6724

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Kdedpfxeyttyve Ahvei Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Ksdpfx Aeyttqzjhvodi Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: not inspected (used), functionality: unexamined, power: 55 kW (74.78 HP), Year of construction: 2010, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum working pressure: 8.5 bar Air dryer Model: ABT 102 compressed air dryer Max. working pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Operating voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes full responsibility for the installation, securing, and use of the machine at the destination. Kjdpfx Ajyttk Iohvedi External reference: 7548

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Ksdpfxoytr Rgs Ahvjdi Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Kedpeytr Hbofx Ahvodi Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Kdodpoq Nx Alefx Ahvji Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, Year of construction: 2026, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm ----- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15" touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor, and software licenses. Item 1.2 Part number 942.5203 DS hydropneumatic feed unit Item 1.3 Part number 723.0121 2 pcs. DS saw blade for wood Bevel/Angle/Flat tooth - Positive Item 1.4 Part number 942.5236 2 sets of DS combined workpiece clamping Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the Materials from above. (Free access to the worktable) Pneumatic horizontal clamp - Anti-rotation clamping cylinder with pressure piece. The clamps can be individually selected via the saw's control system. The clamping sequence can also be set via the control system. Includes safety pre-tensioning pressure. Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.5 Part number 942.5241 DS350 table support grooved (standard groove, Kdodpfjvzt D Tex Ahvji special grooves according to customer specifications available on request!) Item 3.1 Part number 945.2007 Packaging DS350 (transport frame) ----- Total price in this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the Offcuts for butt-jointed glazing beads instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Item 2.1 Item number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders, rotationally secured - 2 cylinder holders with clamping levers ----- OPTIONAL accessories, at extra cost upon request: ----- Item 4.3 Item number 942.5237 DS software "Extra Length" (subsequent steps must be confirmed) Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a timed sequence. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.1 Item number 944.1023 GMF 3000mm caliper complete set (1500 mm plus 1500 mm extension) Includes charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing beads. Functionality For use on doors and large window sashes, the GMF caliper can be mechanically extended safely and quickly to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1 mm Resolutio...

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 5 Hz, type of input current: three-phase, machine/vehicle number: 73185, Deck oven electric baking oven Miwe Condo Model: Type CO.3.1208 AS control panel Bottom and top heat individually adjustable 3 baking decks 1200 x 800 mm 3 ovens with steam function Mobile base with locking casters Connection 400V, 3 x 16A-CEE plug Water connection 3/4 inch, drain DN 40 Dimensions: 1500 x 1300 x 1950 mm (WxDxH) Kdodpfjxduxaex Ahvji Used baking oven Visit our large bakery equipment warehouse!

Condition: used, functionality: fully functional, mileage: 440,003 km, power: 338 kW (459.55 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Kedpfsyv Snfex Ahvedi

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher Kodpfjtxhybsx Ahvodi The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. Kdjdpfx Ahoq I Nvijvsi * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. Kdodjq I N H Njpfx Ahvji 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, functionality: fully functional, Year of construction: 2026, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. Kodpfx Aheq Nxp Sevedi 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. Kdsdpfoq Igiiox Ahvoi 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.