Used Barford Sxr 6000 for sale (3,121)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,813 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,380 mm, power: 74 kW (100.61 HP), drive type: Diesel, Four-way side loader Load centre of gravity: 0 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Gujdowx Agdopfx Afieh Rear tyres type: Superelastic Description: Fork positioner, 3rd valve, rear work light, front work light, heating, full cabin, full free lift,

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 1,038 h, load capacity: 6,000 kg, lifting height: 500 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,550 mm, motor manufacturer: Perkins, fork length: 1,200 mm, tire condition: 70 %, rear tire size: 300x15, overall weight: 9,490 kg, empty load weight: 6,000 kg, total height: 3,410 mm, total length: 5,000 mm, total width: 2,000 mm, maximum load weight: 6,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, We sell forklifts after a full service. Gjdpfxjxbg Eyo Afiouh Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world.

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: Gsdpsv Tvivsfx Afisuh - X: 800 mm - Y: 800 mm - Z: 800 mm Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Gsdpfxew Suwyo Afieuh Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: used, functionality: limited functionality, Year of construction: 2007, operating hours: 71,182 h, laser power: 2,700 W, punching force: 22 t, punching diameter: 75 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, positioning speed: 90 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, workpiece weight (max.): 230 kg, compressed air connection: 6 bar, overall weight: 15,000 kg, workpiece length (max.): 3,700 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 30 mm, cutting force: 200 t, space requirement height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 9,100 mm, tool length: 37 mm, Equipment: cooling unit, safety light barrier, The machine will be available from week 42 as agreed. Additional equipment: - Widening of the C-frame, allowing loading of sheets up to 3800 x 1500 mm with the SheetMaster - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/High-speed beading function - MultiBend function - Roll technology - Post-processing cylinder - Warping detection - Chip conveyor Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors excepted!) Gusdpfx Afoxa Dx Uoioh Further questions can be answered by phone.

Condition: new, Year of construction: 2025, Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml; volume of hopper: 30L; number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Gujdpfsv Nnl Isx Afieh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, On behalf of our client, we offer: as-new precision crosscut machine GMT 6000 / 370 with base and coolant system. New price: €15,000. Now for sale to the highest bidder. Gujdexayxqjpfx Afioh

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,671 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,900 mm, motor manufacturer: G.M., motor model: 3.0., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 28X12,5-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,250 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Looking for a forklift you can count on? We are a trusted supplier of new and used forklifts, backed by years of industry experience. We serve clients across Europe, from small enterprises to international industrial corporations. Our forklifts are more than just machines – they provide the reliability and efficiency your logistics demand. -- What makes us different? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, functional testing, filter and oil replacement, refurbishment of major components) ✅ UDT full inspection optionally available upon request ✅ 🎨 In-house paint and service shop – meticulously prepared mechanically and visually ✅ 🚚 Europe-wide delivery – carried out by our own fleet and trained drivers ✅ 👨‍🏫 Operator training and functional handover at your location ✅ 🛡️ After-sales service and technical support – we remain available even after your purchase ✅ 🏭 View and test the machine at our facility – you are welcome to visit! ✅ 🌍 Hundreds of satisfied customers across Europe – join the growing community that trusts our services ✅ 💶 Financing support – we collaborate with leading leasing companies ✅ 📑 Invoice issued in EUR or PLN – as you prefer -- AVAILABLE: 🚜 COMBILIFT C5000XL – Four-way Sideloader Forklift 📅 Year: 2018 ⏱️ Operating hours: 3,671 h ⛽ Power: LPG 📦 Load capacity: 5,000 kg 📏 Mast: Triplex – 6,000 mm 🔧 Fork positioner 1,350 mm | Extendable forks 1,200 / 2,000 mm 🛞 Superelastic tyres – 100% condition Gjdpfoxaxcbsx Afisuh 🟢 Technical condition: Excellent – after complete service ✨ Visual condition: Very good, rust-free, work-ready 📐 Free lift: 2,000 mm Dimensions: 📐 Truck height: 2,550 mm 📐 Overall length: 2,500 mm 📐 Width: 2,250 mm 📐 Positioner width: 1,350 mm 📐 Overall construction height: 2,900 mm -- Ideally suited for: 📦 Warehousing with narrow aisles 🌲 Timber, steel, and pipeline industries 📏 Handling long or oversized loads 🏭 Indoor and outdoor operations

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand SIEMENS Model n/a Main Drive Number of axis 4 Movement X-Axis Movement 6000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 630 mm Y-Axis Rapid Traverse 60 m/min Gjdpfew Sax Ajx Afieuh Z-Axis Movement 550 mm Z-Axis Rapid Traverse 60 m/min This 4-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BIZERBA Type: CWM 6000 Year of manufacture: ~2002 Performance: 100 pcs/min Weighing range: 50 g - 6000 g With BIZERBA GT-CT touchscreen interface Optional: BIZERBA VARICON+D metal detector Guodpfjvpv Iqsx Afijh The Bizerba CWM 6000 is a fully automatic checkweigher, ideal for use in the food, pharmaceutical and packaging industries. It offers precise weight checks at high speed. The machine is characterized by a robust stainless steel construction, hygienic design for easy cleaning and user-friendly operation via a touchscreen interface. Thanks to flexible customization options, it is suitable for different product sizes and weights. Technical highlights: • High weighing accuracy and speed • Modular design for easy maintenance • Interfaces for data transfer and integration into production lines Areas of application: Quality control and production monitoring in industries with high demands on accuracy and safety.

Condition: used, mileage: 116,424 km, power: 184 kW (250.17 HP), first registration: 05/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 7,550 kg, empty load weight: 10,450 kg, next inspection (TÜV): 04/2026, wheelbase: 3,150 mm, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 6 m³, operating hours: 5,502 h, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, soot filter, traction control, Bucher Cityfant 6000 body, dual-sided pick-up, front-mounted broom, rear warning lights. Non-binding offer—subject to prior sale and modifications. Sale is carried out excluding any warranty. All information provided without guarantee! Gsdpfx Afswu Ry Reieuh

Condition: new, Year of construction: 2025, Automatic Sleeve Labelling Machine with a capacity of up to 100 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; label Ø: 28-50 or 50-95 or 95-125mm; label length: 35-300mm; label thickness: 0.035-0.08mm; power: 2kW, machine dimensions: L6000xW1050xH2100mm; weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gujdev Nlapopfx Afish

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Gedpfx Afshw Ng Ioieuh Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,600 mm, Hersteller: ZAYER, Typ: 30 KCU 6000-AR Baujahr: 2013 Serien-Nr.: 77258 5-Achs Verfahrwege (X/Y/Z) ca. 6000/3500/1600 mm, Werkzeugaufnahme SK50 2 heads: -45° Automatic Head -Direct Head 80-fach Werkzeugwechsler Steuerpult HEIDENHAIN iTNC 530 Späneförderband TECNIMETAL Kühlaggregat EURO COLD Aufspanntisch DEMMELER Kühlmittelanlage Guodow U E Unjpfx Afioh Sicherheitsabsperrung mit Lichtschranke LENZE

Condition: good (used), - Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3100 mm - Width : 1400 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side Guodei Ew D Nspfx Afioh - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Condition: used, functionality: fully functional, total height: 3,500 mm, tank capacity: 6,000 l, inner diameter: 2,000 mm, TECHNICAL SPECIFICATIONS - Open mixing tank with three-blade agitator on two levels - Brand: ALFA LAVAL - 12 shell-and-tube circuits in the middle of the shell Guedpfxjw Uvhle Afijh - Vertical cylindrical shape on legs - Rectangular door at the bottom of the tank - Total drain valve - Connection at the bottom of the tank - Thermometer on the front - Volume: 60 HL (6,000 litres) - Sloped bottom DIMENSIONS - Diameter: 2000 mm - Height: 3500 mm ADDITIONAL INFORMATION - Tank for product density 1 - Conditions of use: atmospheric pressure - 6-month warranty - Manufactured in France - Europe - Complies with CE standards

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, control type: NC control, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 5 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, power: 17 kW (23.11 HP), Equipment: angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Guillotine shear, regularly serviced, complete with manual, wiring diagram, and new UVV, for sale due to production restructuring. Gedpfow Uq U Tjx Afiouh

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Mint condition Counterknives fully rewelded and hardfaced Shafts with Bearing System 1 arrangement ✔️ Ready for immediate use Guedpow Ufhbsfx Afish Contact us for price and further details.

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 turning-milling center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y-axis -200 / +400 mm, B-axis 0.001°, B-axis swivel range -105° / +95°, tool changer with 192 positions, C-axis main spindle 0.001°, spindle speed up to 1,750 rpm, 2 gearbox stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Gsdpjw T Ag Eefx Afieuh

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 7,202 h, load capacity: 4,000 kg, lifting height: 6,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,800 mm, motor manufacturer: GM 3.0, fork length: 1,200 mm, overall weight: 6,100 kg, empty load weight: 4,000 kg, total height: 3,800 mm, total length: 2,300 mm, total width: 2,200 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, Very good condition Combilift. Mast duplex 6000 mm with free lift Sideshift We sell forklifts after a full service. Prepared for the end user. Ready to use. Gjdpsw Tln Eofx Afiouh We can arrange transport within Europe and worldwide.

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,600 mm, Travels: X-axis (lengthwise): 6.000 mm Y-axis (cross): 1.500 mm Z-axis (vertical): 3.600 mm Gujdjtw Tx Tspfx Afish W-axis (Table): 2.000 mm Spindle speeds in 2 steps: 20 up to 4.000 rpm Torque: 1.410 Nm Clamping force: 20.000 N Feed rates X/Y/Z: 2 up to 12.000 mm/min Rapid traverse X-/Y- and Z-axis: 20.000/15.000/25.000 mm/min Drive of the milling spindle at 100% ED: 37 kW EQUIPMENT: CNC-controlled hydrostatic rotary and sliding table, Brand: RÜCKLE, Type: PKTF 8, Year of construction: 1996 -Clamping surface: 2.980 x 3.500 mm -V-axis: 2.000 mm -Table load approx.: 30 tons 120-position tool changer -Tool diameter max.: 125 mm – with free adjacent seats: 250 mm -Tool length max.: 400 mm -Tool weight max.: 30 kg Tool holder (DIN 69871 Form AD): ISO 50 Mobile operator platform Electronic hand wheel HR 420 Chip conveyor 3D thermal expansion compensation Z-axis with level control Tapping without compensating chuck (ratio 1:1) Touch probe system M&H 20.00 wireless Full protection cabin + movable chip protection wall for the rotary table (Setup side/working side) 4-fold milling head changer / Pick-up station 1 piece of Universal milling head , 1° x 2,5° (indexing in the CNC programme) 360 Rear level positions / 144 Front level positions 1 piece of Horizontal milling attachment 1 piece of Universal milling head / Fabrikat: HENNINGER, Type: 880-40 – ISO 40 Internal and external cooling through the spindle Total connected load: 75 kVA Machine weight: 36,2 tons Space requirement (Length x Width x Height) including RÜCKLE table approx.: 12.435 x 8.420 x 5.085 mm

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Gusdpfx Afjw S Tygoijh

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) Gujdow I Rq Ispfx Afioh + Lift table (300 mm)

Condition: used, Year of construction: 2025, functionality: fully functional, For sale are several Rehm reflow ovens and Rehm drying ovens (paint dryers). The ovens are in good, cleaned condition and fully operational. - 1 x Rehm VXP nitro 3850 (year 2010), Type 834 (Project No. 2680) Location: Buchenstraße 18-20, 93426 Roding = €3,500 negotiable - 1 x Rehm RDS 6000 (year 2014) (Project No. 3718) Location: Satu Mare (Romania) = €8,500 negotiable Additionally, we offer: - Asys TRM 03 (year 2012) - Asys FPS (year 2010) - Siplace S 27 and Siplace F 5 HM (year 2006) - Exra X6 HSP (year 2008) for spare parts - Knodel drying oven (year 2015) - Nutek Coating Inverter (year 2014) - Rommel LAG WA 470 (year 2006) Gjdpfx Aew Srqqofieuh - Rommel LEG WA 470 (year 2006) - and more Please contact us if you are interested. We are happy to provide further details and photos of our equipment upon request.

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Gujdpfjwld Sujx Afish Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time