Used Bar Shelf for sale (15,276)

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 04/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference Number for Inquiries: 408211 Krone, S 24 * Year of Manufacture: 2012 * ABS (Anti-Lock Braking System) * EBS (Electronic Braking System) * Tail Lift * Alloy Wheels * Air Suspension * Tandem Trailer * Load Securing Certificate to DIN EN 12642 Code XL * VDI 2700 EN 12195 Compliance * Duo-matic Air Coupling * 15-Pin Connector Plug * Lifting and Lowering Device * Rear Support Legs * Inspections: Main/Emission Inspection valid until 04.2026 * Suspension: Air * Gross Vehicle Weight: 18,000 kg * Unladen Weight: 5,450 kg * Payload: 12,550 kg * Permissible Gross Weight: 18,000 kg * Axle Manufacturer: BPW * Tyre Condition 1st Axle: 30% -- 30% - Tyre Size: 385/65 R22.5 * Tyre Condition 2nd Axle: 30% -- 40% - Tyre Size: 385/65 R22.5 * Tyre Sizes: 385/65 R22.5 * Internal Dimensions: L = 7700 mm, W = 2500 mm, H = 2300 mm * Internal Volume*: 44 m³ * Pallet Spaces: 19 * Trailer Brand: Krone * Body: Ewers Swing-Wall Semi-Trailer * Tail Lift: BÄR BC 2500 – Capacity 2,500 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: Pgedpfx Ajynvzrohyok * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Procurement of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading & load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained professionals for further assistance – we are happy to advise you.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2012, next inspection (TÜV): 10/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 408301 Krone, S 24 * Year of manufacture: 2012 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Light alloy wheels * Air suspension Psdpfxoynvzxs Ahyegk * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air connection * 15-pin connector * Lifting and lowering device * Rear support * Inspection: HU / AU 10.2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7,700 mm, W=2,500 mm, H=2,300 mm * Internal volume: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers wall-swinging semi-trailer * Tail lift: BÄR BC 2500, lifting capacity 2,500 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options * Processing of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport and delivery of utility vehicles Please contact our trained specialist staff— we are happy to advise you.

Condition: used, Year of construction: 1991, bar material dia. 5 - 65 mm Bar length 3000 mm feed length max. 3000 mm voltage 400 V weight of the machine ca. 1,2 t dimensions of the machine ca. 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Pjdjwnt Abopfx Ahyegk Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec.

Condition: used, Year of construction: 1991, bar material dia. 65 mm bar length 3000 mm voltage 400 V weight of the machine ca. 1,2 t Pgedpfx Ashuf Stjhysk dimensions of the machine ca. 5,32 x 0,95 x 1,52 m

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMA06SZZ8HM742116, mileage: 938,000 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 11,210 kg, maximum load weight: 6,790 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, next inspection (TÜV): 03/2025, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,440 mm, loading space width: 2,490 mm, loading space height: 2,450 mm, Year of construction: 2017, Equipment: ABS, additional headlights, air conditioning, cooling unit, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, retarder, tail-lift, traction control, trailer coupling, For sale is a MAN TGS 18.460 with a Schmitz Cargobull refrigerated box body, with a Bär BC 2000 tail lift and a Carrier Supra 850 refrigeration unit. The vehicle is in very good technical and visual condition and is ready for immediate use. Vehicle data: - EZ: 03/2017 - Mileage: 938,000 km - HU 03/2025 - Euro 6 - FIN: WMA06SZZ8HM742116 - Engine power: 460 HP - Tire size: 315/70 R22.5 - Tread depth approx. 60% - Automatic transmission - Total weight: 18,000 kg - Curb weight: 11,210 kg - Payload: 6,790 kg - Retarder - Lane departure warning - Adaptive cruise control - Blind spot camera - Hill start assist - Air suspension rear axle - Disc brakes on both axles - Multifunction steering wheel - Automatic climate control - Auxiliary heating - Navigation - Radio Psdsurih Sjpfx Ahysgk - Radio - Refrigerator - Driver's seat with air suspension - Seat heating - Rear view camera - Duomatic - Multiple work lights - LED Taillights - Wind deflectors - Air horns - Storage box - Tail lift manufacturer: Bär, type BC 2000 - Body manufacturer: Schmitz Cargobull - Cooling unit Carrier Supra 850 - Internal dimensions of the body: Length 7440 mm Width 2490 mm Height 2450 mm Offer subject to change, input errors, changes, mistakes and prior sale reserved. Financing available on request. We are also happy to organize customs clearance for you. Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by arrangement. Invoice with VAT shown will be issued upon sale. Price is NET/ subject to negotiation Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, Year of construction: 1998, functionality: fully functional, Description: Mazak CNC lathe with chip conveyor Type: Mazak SQT 200 Control: MAZATROL PC FUSION 640T Year of manufacture: 1998 Machine number: 320140264 Bar feeder: KSF 60/S4 included in price Chuck: no longer available Chip conveyor: chip conveyor present X-axis: 190 mm Z-axis: 535 mm Turning length: 538 mm Max. turning diameter: 350 mm Max. turning diameter through loader: 70 mm Max. swing diameter: 525 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 Operating/spindle hours: single-shift operation with 80% utilization Voltage: 400/230 V 50 Hz Control voltage: 230 V/24 V Bar loader: IEMCA TAL/AUTO 65/32 Serial number: 020417GA05 Max. bar length: 3,200 mm Min. bar length: 400 mm Max. bar diameter: 32 mm Min. bar diameter: 5 mm Bar loader weight: 850 kg Overall height: approx. 2,000 mm Overall length: approx. 4,000 mm / 5,700 mm Overall width: approx. 1,800 mm Total weight: approx. 5,000 kg Pjdpfx Ajyrrctehyegk Location: Germany, 72622 Nürtingen near Stuttgart Delivery: Short-term possible by arrangement Freight terms: Ex works General condition: Used, very good, fully functional. From the user, first-hand, not a dealer, professionally maintained and serviced The machine can be inspected under power. All technical details are provided without guarantee.

Condition: like new (used), Year of construction: 2020, overall weight: 2,939 kg, total length: 5,286 mm, total width: 2,100 mm, total height: 1,803 mm, power: 129 kW (175.39 HP), fuel type: diesel, fuel tank capacity: 250 l, volume flow: 11.5 m³/h, pressure (min.): 6 bar, pressure (max.): 14 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale: a top-tier professional machine for special applications with only 770 hours: Kaeser M 171 mobile construction compressor with high-pressure configuration and integrated air treatment system (dried + heated + oil-free) The machine was manufactured in July 2020 • List price: €64,270.00 net • Extremely low operating hours, only approx. 770 hours • In excellent technical and visual condition Highlights of this configuration: • High-pressure version: Max. operating pressure 14.0 bar • Ideal for fiber optic cable blowing over long distances, drilling, and demanding blasting applications • Air variant G: Integrated treatment for maximum air quality: • Heated: Prevents tools from freezing and ensures optimal operating temperature • Dried: Effective condensate separation for dry air lines • Filtered: Clean, technically oil-free compressed air (ideal for sensitive systems) • Sigma Control Mobil: Intuitive control for precise pressure adjustment and monitoring Pedpfoy Akmaex Ahyjgk Technical data at a glance: • Manufacturer: Kaeser Kompressoren • Model: Mobilair M 171 • Year of manufacture / first registration: July 2020 • Operating hours: approx. 770 h • Delivery rate (free air): approx. 11.5 m³/min (at 14.0 bar) • Max. operating pressure: 14.0 bar • Engine: Deutz TCD 4.1 L4 (4-cylinder diesel with turbocharger) • Engine output: approx. 129 kW (approx. 175 HP) • Fuel tank: approx. 250 liters (sufficient for a full shift at full load) • Weight: approx. 2,939 kg (depending on the exact chassis version) • Condition: Ready for immediate use, very well maintained, low maintenance Applications: With its combination of high pressure (14.0 bar) and dry/heated air, this machine is the first choice for: • Fiber optic installation (fiber blowing technology) • Corrosion protection & sandblasting (prevents media clumping) • Civil engineering & drilling technology • Industrial service _____ List price: €64,270.96 net Price: Negotiable at €45,300.00 (plus VAT) Location: near Celle Viewing: gladly by appointment, including test run. Feel free to contact me and send a message for further details or photos. Kaeser M171, construction compressor, Mobilair, screw compressor, 14.5 bar, high-pressure compressor, compressed air treatment, variant G, fiber blowing, sandblasting, dry ice blasting, corrosion protection, Deutz diesel, Sigma Control, used machine, year 2020, low operating hours, mobile compressor. If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2017, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Pedpfoxw Nxuox Ahysgk Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2016, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Pgsdpfx Ahexw Nx Ioyek Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: used, mileage: 599,739 km, power: 265 kW (360.30 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space length: 8,970 mm, loading space width: 2,480 mm, loading space height: 230 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz 2636 Antos Refrigerated Box Truck with BÄR Tail Lift 6x2 !!! 3 identical vehicles in stock !!! Suspension: Air-Air Wheelbase: 5.60 m + BÄR tail lift + Carrier refrigeration unit Special equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Exhaust down to the right, Right-hand exterior mirror with maneuvering position, Compressed air connection in cab, High compressed air unit, Pneumatic horn, Driver assistance system: Brake Assist (Active Brake Assist), Vehicle without trailer coupling, Alternator 150 A, 2-cylinder air compressor, Steerable and liftable trailing axle, Tail lift switch, Fleet management system interface, Circuit breaker, Seats in cab: Driver’s comfort air suspension seat, External sun visor, Side window roller sun blind, driver’s door, Voltage converter 24V / 12V 10 A, 12V socket in co-driver’s footwell, Additional 24V socket in co-driver’s footwell, Automatic daytime running lights Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Trailer brake 2-line, connections left, 24V / 15-pin trailer socket, Antos, Electrically adjustable and heated exterior mirrors, Battery 170 Ah, Rear axle differential lock, Steel air tanks, Driver assistance system: Lane Keeping Assist, Cab width: 2.30 m, Cab: hydraulic tilting system, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with 320 mm engine tunnel, Suspension: air / air (full air), Electric windows, Tinted windshield, 12-speed gearbox – Type: G 211-12, Urea tank (AdBlue): 60 ltr., Manual pop-up roof (steel), Rear axle, crown wheel 440, Info display 10.4 cm, Central locking system, Fuel tank: 290 ltr. aluminum, Unregulated power steering pump, Front air intake, Engine 10.7 ltr. – 265 kW R6 diesel (OM 470), Engine brake, Engine compartment encapsulation, Trailing axle single tires, Ramp mirror, Residual heat utilization, Disc brakes front and rear axles, Seat cover/upholstery: fabric, Cab seats: co-driver function seat, Front mudguards, front axle stabilizer, Additional stabilizer, Rear/trailing axle, 24V cab socket, Tachograph / EC control device, Aerodynamically shaped underbody cladding, Front underrun protection, Cranked front axle, Regulated water pump Psdpfxjx Axpas Ahyjgk We are also happy to assist you in financing/leasing through our partners. All information without guarantee. Subject to error and prior sale.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction Pedoy Ah Tkepfx Ahyegk 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) Pgedpoh R Taqsfx Ahyek - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) Psdpjmhhypofx Ahyjgk - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Pjdpfx Asmhh Dhehyogk Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Pedpsmhh Dzofx Ahyegk 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Podpfsfdkb Tjx Ahyjgk Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Pjdjmhh Anspfx Ahyogk - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Pjdpoguk A Hefx Ahyogk Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm Podpfx Ahoguk Dksyogk 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Pgjdpfjmhhy Nox Ahyek Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany Pgsdpfx Ahsmhh Dtsyok - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Pgsdpoguk Dvefx Ahyok The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm Pgjdpfx Aheyffm Eeysk -Weight: 1.8 kg

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units 2300x1000x95 mm 2 units Pedpfsh Izr Uox Ahyogk If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Further accessories available, such as: Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

Condition: used, mileage: 554,800 km, power: 331 kW (450.03 HP), first registration: 04/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 4,550 mm, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, trailer coupling, Color: Blue, permissible total weight: 26,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 295/80 R22.5, 3rd axle: 295/80 R22.5, velour seats, air suspension, lift axle, retarder, digital tachograph, electronic braking system (EBS), electronic stability program (ESP), automatic climate control, adaptive cruise control (ACC), LED headlights, automatic driving light control, headlight range adjustment, Bluetooth hands-free kit, rain sensor, adjustable steering column, roof hatch, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, electrically adjustable curb mirror, wide-angle mirror, immobilizer, wind deflector, axle load indicator, hill start assist, LED daytime running lights, 1x 15-pin connector, coasting function, telematics system, SCR (Selective Catalytic Reduction), non-binding offer, subject to errors and prior sale. Illustration may not correspond to the actual offer. Pgedpfx Ahoy Ablgoysk