Used Bandsaws for sale (414)

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Kljdpfxevf N Sue Abfeu At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Ksdow N S Ecepfx Abfelu Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Cutting angle: from -45° to +60° Kledpfeykvg Hex Abfsu Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg The machine is fully refurbished.

Year of construction: 1998, condition: good (used), Maximum width of the workpiece 410 mm Maximum height of the workpiece 410 mm Saw speed 10> 200 m / min Band saw length 41 x 1.1 x 5940 mm 8.7 kW power required Weight 4 tons Kljdpfx Abeigwcnofsu Characteristics: - Torque Control: measures the torque required for the cutting operation. If the load is excessive, it immediately interacts with the hydraulic circuit to reduce the feed rate to optimal cutting conditions in relation to the cross-section of the material and the condition of the saw blade. - System 9000: allows the operator to select the cutting speed (feed motion) depending on the type of material being cut. At the same time, the feed speed (entering the material) adjusts automatically to generate the optimal chip thickness. Nevertheless, the operator has the option of adjusting the production rate to a specific application by increasing or decreasing it. - The efficiency of the devices mounted on the deb series machines allows the maximum use of the blade capabilities without exceeding them, which translates into long-term productivity and precision. Compucut PLC control

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. Klodpfx Abevwbg Ujfsu For slats from 2 mm * same as new *

Condition: used, Year of construction: 2006, cutting diameter 440 mm Kjdoy Aa H Aspfx Abfolu saw band length 5200 x 1,1 x 34 mm cutting width 610 x 440 mm total power requirement 3,7 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,7 x 1,55 x 1,5 m Band saw horizontal - Coolant system - Emergency stop switch

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Kljdpfjd Iip Tsx Abfju Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t Kjdjd Iipxepfx Abfslu dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min Kljdpfxjfgyiae Abfsu table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm Klsdpfsfgyh Tsx Abfeu band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW Ksdpfx Absfgyh Refjlu weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm Kljdped Iip Nefx Abfeu band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, capacity 90 degrees: round 250 mm Kodsfgyh Sopfx Abfjlu capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm Klodpfxenq Sano Abfju band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm Kodpfx Absd Iipmsfslu dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables Kodefgyicspfx Abfjlu · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut Kjdpefg E Hlsfx Abfjlu • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min Klodpfsfd Abaex Abfou table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer Klodpofn Andefx Abfou • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min Kedpfx Asfv Aq Robfolu total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. Ksdpfxefg E Hps Abfslu • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar Klodpfx Aod Iiptjbfou • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm Klodpfjd Iip Rox Abfeu table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min Klodpfx Aod Iip Ujbfsu dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: used, power: 2.2 kW (2.99 HP), cutting height (max.): 340 mm, cutting width (max.): 600 mm, total height: 2,350 mm, total length: 1,200 mm, total width: 800 mm, overall weight: 500 kg, No. 04515 Bandsaw HEMA PH 630 Klodsyvifnepfx Abfeu Used Roller diameter 630 mm Motor 2.2 kW, with electric brake Table dimensions with extension 930 x 660 mm LW Cutting height approx. 340 mm Cutting width approx. 600 mm Transport dimensions approx. 1200 x 800 x 2350 mm LWH Weight approx. 500 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse