Used Band Turner for sale (4,010)

Condition: excellent (used), CATALOGUE NUMBER 7602 TECHNICAL SPECIFICATIONS - Sharpening speed: automatic - Cooling - Belt support arms - Grinding wheel size: 120 mm - Motor power: 0.17 kW, 400 V - Dimensions (L/W/H): 500x700x1200 mm - Weight: 120 kg ADVANTAGES – Made in Poland – Unpainted – Belt support arms – Used sharpening machine – Very good condition Bledpfex U Ac Djx Aafjc Net price: 4,900 PLN Net price: 1,160 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1998, cutting diameter 280 mm saw band length . mm cutting width . mm total power requirement . kW weight of the machine ca. 1 t Bljdpoucgxzjfx Aafec dimensions of the machine ca. . m

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Bedov Sm Hcspfx Aafelc Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Year of construction: 2003, condition: ready for operation (used), A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible. Blodpfx Aajycwrhsfsc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, saw band length: 6,320 mm, saw band width: 100 mm, total height: 3,000 mm, total length: 13,100 mm, total width: 2,090 mm, cutting width (max.): 1,100 mm, table height: 950 mm, cutting height (max.): 990 mm, table width: 1,400 mm, table length: 11,070 mm, power: 22.5 kW (30.59 HP), Used Holzhäuer Wide Band Saw – 22.5 kW Machine Data: Bsdpfx Aaeycwncofslc Manufacturer: Holzhäuer Model: Mobilsäge HD90 Machine type: Stationary wide band saw for wood Year of manufacture: 2006 Availability: from calendar week 08/2026 Technical Specifications: Max. log diameter: 1,400 mm Saw band length: 6,320 mm Band width: 100 mm Motor power: 22.5 kW Scorer: yes Hydraulic stops: 4 units Manual stops: 2 units Operation: Joystick – up to 12 functions Extraction connection: yes Condition & Maintenance: Machine in used condition due to daily operation. Hydraulic pump unit replaced in 2025. Known defects: 1. Bent support surface 2. Digital cutting thickness setting defective → Optical scale retrofitted All details regarding defects and maintenance given to the best of our knowledge, errors excepted. Inspection of the machine possible.

Condition: used, Year of construction: 1996, Plate feed direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating time: 4.5 min Automatic roll magazine: Yes End trimming shears up to: 0.2 - 3.0 mm Individual edge feeding: Yes Automatic gluing: glue pot with granulate, positioned on top Cut-off saw: fixed at 90° Flush milling unit: Yes Combination milling unit: Yes Aggregate display: Display available Control type: manual Operation: selector switch/push buttons Mobility device: No Protective hood: Yes Working height / table height: 870 mm Weight approx.: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction port diameter: 120 mm Blsdpfx Aexwdp Uoafoc Location: Supplier

Condition: new, Particularly heavy design with high dead weight for maximum smooth running. Particularly smooth and precise running thanks to torsion-resistant machine housing. Large cast iron parallel fence with round rod guide, easy to move. Cast iron flywheels with rubber coating and cleaning brush. Blsdpfeviq D Hjx Aafec Large cast iron saw table, pivoting with ground and polished surface. polished surface. Precise cutting height adjustment via toothed rack with millimeter scale. Doors secured by limit switches. Self-braking motor. Two extraction sockets. High-quality saw blade guide type GL top/bottom. Useful accessories make these wood band saws even more versatile: GEBS 640 AS Saw blade thickness min./max. 0.5/0.6 mm Worktable dimensions 870 x 620 mm Worktable height 840 mm Cutting speeds 1660 m/min Flywheel 640 mm Max. Cutting height 400 mm Max. Cutting width 620 mm Saw blade length 4780 mm Precision guide top / bottom Saw table inclination 0° to +15° Motor power 2.2 kW / 400 V Weight 320 kg Promotional prices plus VAT 4.239,00 €*

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Blodpfoycuqnsx Aafjc Operators control station including speed control and start stop controls Working height 800mm

Condition: used, Year of construction: 2007, functionality: fully functional, saw band length: 3,180 mm, saw band width: 27 mm, cutting range round steel at 90°: 240 mm, power: 2.4 kW (3.26 HP), Capacity 90°: Ø240 mm./220 x 300 mm. Capacity 45° right: Ø200 mm./100 x 200 mm. Capacity 60° right: Ø120 mm./160 x 110 mm. Blade dimension: 3180 x 27 x 0,9 mm. Blade speed: 16-80 m./min. (Variable) Motor: 2,4 kW. Year: 2007 Country of origin: Italy. Size (L x W x H): 2600 x 1800 x 1900 mm. Bedpfx Aajxn Skbefolc Weight: 1150 kg. With variable cutting speed, 500 mm. multiple feed stroke, digital readout of bow position, Unist oil mist cooling unit and pressure regulating of vices All our machines are tested and serviced before delivery.

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Blsdpfeyctwmex Aafsc Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Condition: new, Year of construction: 2026, The CORMAK H400SA automatic bandsaw is a high-performance industrial machine designed for accurate and repeatable cutting of large steel parts, tubes and closed profiles. With its double-column structure and fully automated cutting cycle, it is ideally suited for production facilities, metal workshops and logistics centres dealing with large-scale material processing. Main Advantages Automatic operation – full cutting cycle without operator intervention: clamping, feeding, cutting and arm return. Hydraulic feed and vice system – ensuring fast, safe and precise cutting. Arm and vice position memory – shortens cycle times and increases efficiency in serial production. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Large cutting capacity – materials up to Ø400 mm or 400 × 400 mm. Construction and Technology The double-column CORMAK H400SA bandsaw is built on a robust welded steel frame with a cast-iron body, ensuring maximum rigidity and vibration damping. The saw arm is set at a 3° angle relative to the work table, which facilitates cutting of profiles and hollow sections. Precision and Productivity Hydraulically controlled arm feed with adjustable cutting pressure and precision throttle valve allows accurate adaptation to various materials. The hydraulic feeding system with electronic control enables programming of cutting length and quantity. The LCD display provides information about progress, errors, and material status. An automatic stop system halts operation in case of faults or programme completion, ensuring safe and efficient performance. Applications The CORMAK H400SA model is ideal for: Metalworking and steel construction industries Profile and section processing centres Serial production in workshops and industrial plants Logistics companies cutting materials to size Standard Equipment Blsdpfx Ajyctr Reafec Automatic working cycle Arm and vice position memory Hydraulic unit and feed system Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade for metal CE Declaration of Conformity Technical and Operation Manual (DTR) TECHNICAL PARAMETERS Cutting range Ø400 mm or 400 × 400 mm Blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Feeder stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 1800 kg

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Bsdpfxjycqhcs Aafslc Weight 491 kg

Condition: used, Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel material with edge bands. The machine enables clean edge processing through automatic glue application, pressing rollers and post-processing aggregates. Ideal for furniture and interior construction. Technical data subject to change. Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm Blodpfoxdc D Rox Aafec feed rate: approx. 10 m/min

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA - Wheel diameter: 610 mm - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES – German-made – Not repainted – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR Bodpjwbdnujfx Aafolc (Prices may fluctuate with significant exchange rate changes)

Condition: good (used), Year of construction: 2006, Complete fully automatic large-format bandsaw from Behringer Capacity: 510 x 723 mm Double miter (automatic) Feed belt system, self-clamping Blsdpfex Upl Sjx Aafjc Year of manufacture: 2006

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and Technical Data: - Base machine: Streamer 1057XL 200-400 V / 50 Hz, with manual pressure bridge adjustment - Extendable XL workpiece support: spacing 600 mm - Jointing milling unit: FG201 with 2 cutterheads for trimming panel edges - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System - Edge feeding unit: 1903, automatic transport for roll and strip material - Glue application system: Glu Jet GJ301 2.3 kW / 50 Hz, automatic glue height adjustment (contact nozzle) - Automatic reloading function - Pressure unit: 1912-3, pneumatic, first roller driven, with pneumatic plunge control - End trimming unit: 1918, 60 mm, pneumatic, angular trimming 0-10 degrees, pneumatic adjustment - Extraction hoods: for end trimming unit 1918 - Multifunctional milling unit: FR 201, for flush, radius, and profile milling, including DIA cutters - Corner copying unit: 1832, 1 x 0.35 kW / 200 Hz / 12,000 rpm, corner copying for edge thickness up to 3 mm - Diamond cutter: Diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, CM technology (Leuco system), integrated chip extraction, for profile milling unit 1832 - Scraper unit: 1929 - Complete chip box: Diameter 120 mm, for 1929 + 1964 + FK70 - HW reversible knives: for scraper holder R = 2.0 mm, 2 pcs required - Surface scraper: FK 701 for removing excess glue for a clean glue joint - Spray device: TR 201 for infeed and outfeed areas - Buffing unit: 1940, 2 x 0.09 kW / 50-60 Hz / 1,400 rpm, for finishing and polishing edges, with 2 textile discs, tiltable 0-5 degrees - Minimum workpiece length: 160 mm - Workpiece thickness: 6-45 / 60 mm - Edge thickness: 0.4-3 / 6 mm - Feed speed: 10 m/min Length: 4,630 mm Weight: approx. 1,440 kg Availability: short notice Bedpsx Twh Ejfx Aafolc Location: 65439 Flörsheim

Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter. The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use. Key advantages of the CORMAK BS320H Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production. Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use. Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life. Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating. Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services. Applications Bljdpfxsychwne Aafec The CORMAK BS320H metal band saw is recommended for: manufacturing plants and structural fabrication companies (profiles, sections, steel components), metalworking shops and tool rooms, maintenance departments, steel cutting services (repeatable series), cutting pipes and profiles as a dedicated band saw for pipes and profiles. Why choose this band saw? If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation. Technical specifications Type: Semi-automatic band saw Arm lifting/lowering: Hydraulic, infinitely variable Blade speed: 37.5 / 75 m/min Miter cutting range: from −45° to +60° Vise: Hydraulic Minimum cutting diameter: Ø 5 mm Minimum clamping length: 30 mm Vise base height: 950 mm Blade size: 27 × 0.9 × 2680 mm Total power: 1.5 kW Dimensions (L × W × H): 2000 × 860 × 1500 mm Weight: 250 kg

Condition: used, Year of construction: 2000, AUTOMATIC SAWING MACHINE BRAND RES MAX. VICE OPENING: 430 mm MAX. BLADE HEIGHT: 440 mm EQUIPPED WITH CHIP CONVEYOR INCLUDES 8 NEW BLADES Bjdpeycf N Uofx Aafjlc

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, USED MACHINE – Manual metal band saw (hydraulic saw frame lifting), double mitre -45° – 90° – 30° Technical details: • Manufacturer: BEKAMAK • Year of manufacture: 2010 • Cutting capacity: 90° round: 270 mm; rectangular: 350 x 220 mm; square: 270 mm 45° right round: 230 mm; rectangular: 230 x 150 mm; square: 170 mm 30° right round: 150 mm; rectangular: 150 x 100 mm; square: 100 mm 45° left round: 190 mm; rectangular: 200 x 100 mm; square: 160 mm • Drive capacity Saw band drive 400 V / 50 Hz / 1.5 kW Coolant pump 400 V / 50 Hz / 0.12 kW Hydraulic motor 400 V / 50 Hz / 0.37 kW • Band speed 20 – 100 m/min • Working height 910 mm • Saw band 3160 x 27 x 0.9 mm Bledsycf D Eopfx Aafoc • Dimensions 1730 x 770 x 1460 mm • Weight 476 kg Standard equipment: • Hydraulic lifting of the saw frame, which automatically returns to the preset starting position after the cut is complete • Powerful band drive via industrial electric motor with frequency inverter for variable band speed from 20 to 100 m/min • Saw frame lowering via hydraulic cylinder; infinitely adjustable • Saw frame height adjustment via limit switch • Robust, low-vibration cast frame • Quick-release vice for easy and convenient material clamping • Easy manual movement of the vice to left/right • Simple mitre angle adjustment of the saw via rotation of the saw frame • Electronic saw blade tension monitoring with broken blade detection • Sturdy machine base with coolant tray and coolant pump • Carbide saw band guides and guide rollers • Light-duty material stop, 500 mm • Coolant pump with dual feed to the saw band guides, independently adjustable • Rotating band cleaning brush

Condition: used, Year of construction: 2002, miter ja weight of the machine ca. 370 kg 3 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Bledpfxofmm Dze Aafsc Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, CATALOG NUMBER 7585 Technical specifications: - wheel diameter: 630 mm - table dimensions: 850x810 mm - angle-adjustable table - motor: 3 kW - max cutting height: 320 mm - band-to-frame throat: 600 mm - dust extraction port diameter: 90 mm - brake - dimensions (L/W/H): 1300x830x2050 mm - weight: 420 kg Advantages: Blodpfxjx Tptgs Aafec – Polish production – DTR documentation – very good condition – used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2025, operating hours: 57 h, functionality: fully functional, machine/vehicle number: 24111638, overall weight: 11,600 kg, cutting height (max.): 940 mm, table width: 1,050 mm, table length: 6,000 mm, Equipment: CE marking, Band saw from 2025 with only 57 operating hours! Sale due to business closure. TECHNICAL DETAILS Max. cutting height: 940 mm Table length: 6,000 mm Table width: 1,050 mm Saw orientation: Horizontal MACHINE DETAILS Weight: 11,600 kg Bodpfxex Tpx No Aafolc Protection: 100 A Total power: 51 kW Main motor power: 30 kW Operating hours: 57 hours EQUIPMENT Documentation CE marking CE certificate

Condition: used, vertical band saw brand PEHEKA type SU 6.33 Bsdpfxodawl He Aafolc Throat depth: 615 mm max. Cutting height 250 mm cutting speed: min. 12 m / min of Max 3000 meters per minute, adjustable with blade welder make IDEAL blade length 4700-4800 mm blade width 8-25 mm 380 volts dimensions: L. 1400 T. 1100 x H. 2280 mm

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles Bjdjwzivdepfx Aafslc

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm Bljdpox A Dt Defx Aafoc - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)