Used Band Dryer for sale (5,406)

Condition: good (used), Busch TB24 I Banding Machine The machine is in very good condition. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 20-25 cycles/min Pjdpfsy Sfa Hex Amkspt Band dimensions: Length: unlimited Width: Paper – 24 cm Foil – 18 cm Height: 15 cm. The machine comes with: spare bands, an instruction manual, and a machine cover.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Podpfx Amjy Sfayokept Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: good (used), For sale is a professional, stationary, industrial-class Wood-Mizer LT300S band sawmill. This is a flagship, fully automated machine designed for mass, continuous production of lumber with minimal physical labor (the entire operation is handled by a single operator from a stationary station/cabin). The machine comes from the official Polish distribution network (manufactured in the Wood-Mizer Industries factory in Koło). The original nameplate is fully legible, guaranteeing the complete legality of the equipment and trouble-free selection of spare parts and manufacturer's service support. ⚙️ TECHNICAL DATA FROM THE NAMEPLATE: Manufacturer: Wood-Mizer Industries sp. z o.o., Koło, Poland Model / Type: LT300S Serial number: 032006 030 A4.03 Ppsdpjy Tzqdjfx Amkst Supply voltage: 400 V (Three-phase) Frequency: 50 Hz Full load current (FLA): 54 A Full load current of largest load (FLA of Largest Load): 39 A Short-circuit current (AIC): 35 kA Electrical diagram number: shlt300 💎 KEY FEATURES AND ADVANTAGES OF THE LT300S MODEL: Extreme Performance: "Heavy Duty" construction designed for multi-shift operation. It allows processing from 15 to even 24 m³ of logs per shift (depending on the type and dimensions of the wood). Thin-Kerf Technology: Thin, stable blades (standard width 38-44 mm) significantly reduce the amount of waste in the form of sawdust, resulting in a much higher yield of finished material from each log. Full Industrial Hydraulics (High-Output): Machines in this series are equipped with a very fast and powerful hydraulic system: two-way chain log turner, advanced log clamping, and leveling rollers. PLC Automation (Setworks): The computer automatically calculates and positions the head to the appropriate cutting dimension with the highest repeatability, eliminating human error and reducing the time between successive saw passes. Board Return System: Integrated sweeping arms automatically remove the cut material during the head's return, so no additional worker is needed to operate the output line. 🪵 PROCESSING PARAMETERS: Maximum log diameter: approx. 91 - 95 cm Maximum cutting width (between rollers): approx. 73 cm Diameter of guide wheels: 600 mm (cast iron) Main engine power: 22 kW (provides a large power reserve for the hardest wood species or frozen logs) 🛠️ TECHNICAL CONDITION: The sawmill is in perfect working order, regularly serviced, and maintained to a high technical standard. Ready for immediate integration into the sawmill's production cycle without the need for any financial investment.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Psdpfxsw Tfw Ho Amkjpt Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 Psdpfx Amewpi Rkskept + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: used, Year of construction: 2011, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit Ppedpfoy Sbkhox Amkot - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 Ppjdpfxjy Twahs Amkjt PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES CONNECTION NEW/USED USED

Condition: new, Technical specifications can be found in the PDF file. Installed special equipment: KL Material slide for sections LS Laserliner CD Saw band tension indicator SD Screw conveyor for chips HVP 300 CF-NC Clamping force (for both clamping bars) MM Micro-spray system (cooling and lubrication with oil mist) Ppodpfx Amjy Tvxcokjt

Condition: used, Year of construction: 1974, Roll diameter: 600 mm Storage location: Nattheim Ppedpfey R Tqkex Amkot

Condition: used, For sale: MEP PH 261-1HB band saw for metal. The machine is used, in good condition and fully operational. Inspection and testing on site is possible. The MEP PH 261-1HB is a professional manual gravity band saw for metal, designed for cutting tubes, profiles, and solid materials. The HB system enables automatic descent cutting without operator intervention. Specifications: Model: MEP PH 261-1HB Mitre cutting range: 0° to +60° Cutting capacities: 0° – Ø225 mm, 200 x 200 mm, 240 x 160 mm +45° – Ø160 mm, 140 x 140 mm, 155 x 115 mm +60° – Ø90 mm, 90 x 90 mm Maximum vise opening: 245 mm Blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 46 / 92 m/min Motor power: 0.94 / 1.1 kW Working table height: 950 mm Machine weight: approx. 240 kg Cast iron construction for reduced vibration and increased cutting precision Quick mitre adjustment Suitable for cutting steel, stainless steel, aluminium, and other metals For more information: MEP PH 261-1HB Ppodpfsy R Sgwsx Amket Professional Italian machine for workshops, production, and metalworking companies. If you have any further questions, we will be happy to assist you.

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system SOMOS D200 Year of manufacture: 2010 10x hopper Ppodpoy R Rumofx Amkst Including electrical wiring diagram and operating manual

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and technical data: - Fully installed dryer with trolley, high-performance radial fan, electric heating - Supply and exhaust air dampers, safety thermostat, spray device - Lift-swing door for easy opening and closing of the dryer - Interior cladding: all side walls are made of sea-water resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood components such as tannic acid, etc. - The sealing of the connection joints is absolutely durable and also allows steaming in the unit - Stack dimensions: 530 x 105 x 115 cm - Stack volume: 6.4 m³ - External dimensions: 690 x 176 x 140 cm - Heating: 12 kW Ppodoy R Ha Sopfx Amkjt - Motor: 1.1 kW / 400 V - With MP 902 control Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) Psdpfx Aox R D Efjmkept C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2010, machine/vehicle number: 0226, functionality: fully functional, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, The used HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly suitable for use in laboratories or when frequent material changes occur (e.g., small production runs). Batch dryer/pre-drying station with integrated absorption dryer, type TLZ 12.1. 6 x 15-liter V2A modules with sliding guide and discharge slide. 3 air filters. Psdpfx Amsy Tn Uvskept Recirculation air cooler. Weekly timer. 6 x red/green traffic lights indicating the end of the drying cycle or a fault at the docking station. Automatic 6-stage air flow control via a frequency converter on the dryer fan. The unit is mobile. Module 10742 - 10746, 10293. Includes a dew point meter for the absorption dryer. For sale to commercial customers only, with no warranty.

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS Ppedpfx Amoy R A E Deket - Wheel diameter: 630 mm - Table dimensions: 890x710 mm - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations) Ppsdpsy R A Edjfx Amkjt

Condition: good (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 10019824, cutting range round steel at 90°: 320 mm, ● Delivery terms: Free on truck ● Location: Sprockhövel ● Availability: Immediately - by arrangement ● Net price: €19,900 ● Payment terms: Payment in advance - by bank transfer Ppjdpoy R A R Tjfx Amkjt ● Internal number: KL1 Technical data: ● Cutting range 90° round: 320 mm ● Cutting range 90° flat: 520 x 320 mm ● Smallest dimension to be sawn (round): 10 mm ● Smallest dimension to be sawn (flat): 10 x 8 mm ● Drive power: 2.6 kW ● Cutting speed: 15 - 110 m/min ● Saw blade dimensions: 5,300 x 34 x 1.1 mm ● Shortest remaining piece length: 40 mm ● Total drive power: 3.7 kW Scope of delivery: ● Existing manuals as shown in the pictures ● Numerous saw blades as shown in the pictures Dimensions & Weights: ● Installation dimensions L x W x H approx.: 3100 x 1100 x 2200 mm ● Weight approx.: 1600 kg Additional notes: ► Upon request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold without any warranty ► Technical data is subject to change ► Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), Year of construction: 2000, Tempering unit Psdpfx Ajgvddpjmkopt Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Refrigerant type: R134.6

Condition: good (used), Year of construction: 1999, Compressed Air dyer Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Ppedpsg Nk Abofx Amkot Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm

Condition: new, Year of construction: 2025, functionality: fully functional, New, innovative DCS system with 5 pre-set cutting speeds for the most common materials. In addition, the belt speed can be manually adjusted continuously. A load indicator signals the motor load, in order to minimize motor damage, potential saw blade breakage, and cutting errors caused by excessive pressure. The reversed rotation direction of the saw blade (NG system) enables a cutting speed up to 40% faster than with traditional machines. The patented slip clutch prevents over-tensioning of the saw blade. A cutting line laser facilitates accurate positioning of the material. Despite a large cutting area of 110x85 mm, the machine is very light at 17 kg. The saw frame and base plate are made of aluminum die-cast and thus enable an enormous weight reduction. The vice cast into the base plate ensures maximum precision. A miter adjustment of 0 – 45° and adjustable belt guides enable versatile applications and accurate cuts. FEMI – quality for professionals and demanding DIY enthusiasts. Technical data: Motor: 230 V, 50 Hz, 0.95 kW Saw blade dimensions: 1330x13x0.65 mm Weight: 17 kg Saw blade speed: continuously adjustable, 30 – 80 m/min Miter angle: 0 – 45° Cutting area in mm: 0° 110x85 105 100x100 45° 75x37 74 72x72 Pedey Tnctspfx Amkopt Scope of delivery: 1 saw blade 1330x13x0.65 mm, 14 teeth/inch 1 length stop, 500 mm Operating manual and CE declaration of conformity

Condition: good (used), Year of construction: 2015, - Machine: including Geldmeier return unit, type PRFU 1200 LU; year of manufacture: 10/2015 Podpfxoy Tm Hws Amkopt - Description: see photos.

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Ppedpfey Tmrmjx Amkst Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Condition: used, Year of construction: 1996, max. blade length: 4720 mm, motor power: 2.2 kW, roller diameter: 600 mm, max. cutting height: 395 mm, max. cutting width: 585 mm, tiltable table: yes, column side: left, fence: usable on both sides, blade guide position: top and bottom, blade guide: roller guide, design: stationary, weight approx.: 300 kg, dimensions: 1115 x 670 x 2115 mm. Storage location: supplier. Ppodpfx Amoy Rz Hteket

Condition: ready for operation (used), Year of construction: 2002, Band saw, Industrial Band saw, Behringer HBP 220, Used Machine Manufacturer: Behringer Model: HBP 220 Year: 2002 Weight: 1120 kg Dimensions: 2350 x 1250 x 1850 mm Cutting Range: 220x230 mm Ppedpjtlq Axefx Amkst Hydraulic clamp Electrical Data: 1.5 kW; 50 Hz; 6 A Ready for operation

Condition: excellent (used), Year of construction: 2021, Huber CenterMax band screen for (waste) water inlet Chamber opening: 600mm Screening width: 600mm Discharge height to bottom: 6722mm Machine height above bottom: 8642mm Pedpfxey Tmbbs Amkspt Perforated plate: 2mm