Used Band Dryer for sale (6,063)

Condition: excellent (used), ACM BS 940 RS3 dividing band saw with centring device Wheel diameter: 940 mm Saw blade dimensions: min. 6580x90x0.9 mm, max. 6670x90x0.9 mm Table tilt: 0–20° Automatic centring device Feed: ARTIGLIO RSA 80 Feed speed controlled by variator Gsdpfx Agsxanvwobjbg Motor power: 11 kW Technical documentation Weight: 1100 kg Overall saw dimensions: 1660x1720x2900 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details cutting diameter 280 mm saw band length 4930 mm cutting width 280 mm capacity 90 degrees: square 280 x 280 mm saw diameter min. 10 mm cutting length min. 6 mm Weight of Material maxium 400 kg/m cutting speed 20 - 110 m/min sawing motor 2,2 kW dimensions of saw-band 4930 x 34 x 1,1 mm total power requirement 7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2280 x 2680 x 2050 mm Additional information Shortest Remaining Piece Length in Single Cut 15 mm Shortest Remaining Piece Length in Automatic Operation 80 mm Feed Length 700 mm Multiple Feed Length 9999 mm Cutting Speed Infinitely Variable 20-110 m/min Cutting feed: Infinitely variable Material clamping: Hydraulically infinitely variable, clamping pressure: 20-60 bar Gbedpfsx Shckex Agbjg Equipment: CNC control Machine roller conveyor, dimensions: 2000 x 550 x 700 mm, weight: approx. 150 kg Machine documentation

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h Gjdpfstty Raex Agbjbg

Condition: good (used), Year of construction: 2008, Used fully automatic band saw from Bauer Type VG 450 ZA-2 Capacity: 90° 430 x 600 mm 45° Left 430 x 430 mm 45° Right 430 x 440 mm 30° 430 x 260 mm Saw frame is inclined forward by 3° Godpfxex Sdmrs Agbsbg Hydraulic swiveling of the saw frame, 45° to the left and 30° to the right The material clamps have a full stroke The transport clamp has a stroke of 1500 mm Cooling by mist spray unit and/or coolant 2 cutting speeds: 30/60 m/min Excluding roller conveyors

Condition: ready for operation (used), Year of construction: 2004, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 82,10,1606, Spreader for fabric pieces and automatic IMA cutting machine, in perfect working condition until December 2025. Gjdpjx Tqivjfx Agbjbg

Condition: good (used), Year of construction: 1990, functionality: fully functional, saw band length: 4,100 mm, saw band width: 32 mm, Forte SBA 241 automatic band saw Cutting width: 260 mm Gbodox Tqiijpfx Agbjg With 1500 mm long roller conveyor Includes several spare saw blades Complete documentation available The machine is in good condition and operates flawlessly.

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm initial humidity 80% final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul. Gbodpevndvysfx Agbog

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. Gbedpsx Sgicsfx Agbeg The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024 Gedpfx Aouy Thmsgbebg

Condition: new, Year of construction: 2024, machine/vehicle number: TR0054_ALMRD400, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD400 Type: ALM-RD400 incl. 2 x air filters Gbjdpog Tvngefx Agbjg Delivery quantity: 6.25 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 86 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, incl. Hydraulic lifting of the saw frame with check valve Micro dosing unit Available with or without laser light for cut line indication Metal band saw for straight and mitre cuts, continuously adjustable from 30° - 45° - 90° - 45° - 30° according to scale Swivel axis remains unchanged at any angle setting, therefore precise Gbodpfx Ajd Tb N Ajgbeg length measurement at 90° and in the mitre range. Cutting speed: 35 and 75 m/min, pole-switchable Cutting capacity 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Alternatively available in "HS" semi-automatic version: - Hydraulic lifting of the saw frame - Hydraulic material clamping/short stroke - Rapid approach lowering to material top edge The following options are recommended: Micro-spray system Laser light Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, saw band length: 6,380 mm, Highly efficient semi-automatic bandsaw with excellent cutting precision for processing medium and large bars and profiles. The robust construction and vertically guided bow on two columns provide the machine with the necessary rigidity and accuracy of the sawing unit. - Motor power: 4 kW - Saw blade size: 6380x41x1.3 mm - Maximum cutting angle: 45° right - 60° left - Appropriately dimensioned flywheels - Chip cleaning unit with brush - Machine features automatic rotation for programmed mitre cuts - Minimum quantity lubrication - Chip conveyor !Attention, the offer includes only the machine; roller conveyors and length stops can be purchased separately.! Gedpsxr Uk Ssfx Agbjbg The new price of the machine is EUR 53,140.--

Condition: excellent (used), Cutting height 42cm-56cm Cutting width 20cm-40cm Gbsdpsv Euraofx Agbeg Engine 20 HP Belt width 110mm Belt length 6520mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0053003064, Fully operational, robust BIANCO 370 A machine (2007) – ready for immediate use. On-site testing available, complete nameplate data, quick collection possible. For sale: industrial BIANCO machine, model 370 A, year of manufacture 2007, serial number 0053003064. The unit comes from regular factory operation and was used as intended. The sale is due to an upgrade of the machinery fleet. The machine is in very good condition. It can be started and tested on site (under power) – the buyer can observe the machine in operation and assess its condition before purchase. Nameplate data Manufacturer / model: BIANCO 370 A Year of manufacture: 2007 Serial number (MATR.): 0053003064 Power: 2.83 kW Supply voltage: 380/415 V, 50 Hz (current: 7.3 A) CE marking – compliant with machinery regulations solid construction and simple operation stable performance and repeatability easy maintenance and access to standard wear parts Gedpfjx Tfugjx Agbebg an excellent base for continued use in production or workshop environments

Condition: used, Year of construction: 1959, roll diameter 500 mm Gsdpfjxh Swzex Agbobg throat B485/H350 mm table-size 700x600 mm cutting speed 15-940 m/min weight of the machine ca. 0,9 t dimensions of the machine ca. 1200x800x2100 mm

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Gbedpfx Agjt D Azcsbog Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Year of construction: 1965, condition: used, roll diameter 400 mm throat 390 mm workpiece height 240 mm saw band length 2980 mm table surface area 500x600 mm weight of the machine ca. 350 kg dimensions of the machine ca. 650x1100x1700 mm Gbodpfx Aolp U Niogbog

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and frame lifting to pre-set height after completion of the cut. Stepless hydraulic monitoring of cutting pressure and feed at the saw band feed. This ensures optimal conditions for every sawing task, i.e., constant pressure with solid material and constant feed with thin-walled profiles. Especially suitable for universal applications with varying cross-sections, materials, and frequent miter cuts. Machine control in compliance with CE standard 89/289. Technical Data: Round/Flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid downfeed of the saw frame to material edge via push button Manual miter adjustment from 90° to 30°, stepless via scale The miter rotation point is at the intersection between saw band and fixed vice jaw, thus no change in length measurement with changing angle positions Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralized machine controls Saw band drive with end-stop Movable band guide arm, adjustable to material width Saw band deflection wheels – carbide guides Powered chip cleaning brush Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/RAL 7031) Remnant piece length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable at the control panel Drive: Saw band 3.0kW; 400V, 50Hz Gbsdpfehppabsx Agbeg Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Stepless up to 300mm/min, hydraulically controlled Saw band tensioning: Mechanical with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without installation elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser guide Micro-spray device Clamping pressure regulator Support table on the infeed side

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Godpfx Aot Dpw Rogbjbg Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Available from stock! Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic bandsaw with dual-sided mitre adjustment from 90° to 30°, stepless via scale with 0.5° accuracy. Includes the optional micro-spraying system! Gbjdpjwcwggjfx Agbog Hydraulic lifting/lowering of the saw frame Semi-automatic sawing cycle Hydraulic material clamping / short-stroke cylinder Rapid downfeed to material top edge 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25 mm

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Gedpfx Agjh Tnd Aebjbg Recommended options: Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided automatic metal band saw with stepless mitre adjustment from 90° - 45° - 30°. Especially suited for universal applications involving various cross-sections, materials, and frequent mitre changes. Pivot point remains unchanged for all angle settings, allowing precise length measurement at 90° and in the mitre range. Gbedpfeh S Nxzox Agbog Technical data: Cutting capacity: 90° round 335mm, flat 500x335mm 45° right 330mm, flat 320x335mm 30° right 200mm, flat 200x335mm Cut-off length: Single stroke up to 600mm, multiple stroke up to 6000mm Cutting speed: AC frequency-controlled drive, steplessly adjustable 15-150 m/min from control panel With the following additional equipment: Freestanding control panel The following options are recommended: Micro-spray device Laser line indicator Clamping pressure regulator 7" CE panel Installation elements

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Patented miter system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw drive Swivel range 30° right / 45° left Cutting range in mm: Gsdpfx Agjh S Nxpebsbg 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping: 60mm Recommended options: Micro-spray device Laser light Clamping pressure regulator Powered chip brush Manual support roller Set-up elements

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Automatic material feed Double-sided mitre cuts Compact construction Precise material positioning by servo positioning technology Future-oriented electric saw feed with ball screw drive: Maximum cutting performance and quality, while minimizing wear on the saw band Unique and patented double mitre system: Material is always clamped at a right angle Cutting range (mm): 90° – round 335, flat 500 x 335 45° right – round 330, flat 320 x 335 45° left – round 305, flat 305 x 335 30° right – round 180, flat 170 x 335 Minimum remnant length without bundle clamping: Manual: 80 mm Automatic: 300 mm Automatic cutting pressure and feed monitoring Frequency-controlled AC drive, 15–150 m/min Hydraulic full-stroke material clamping Automatic movement of clamping jaws Minimum speed and saw band monitoring Electric mitre adjustment via servomotor Visualized program input with CNC control Material feed via servo-controlled ball screw drive The following options are recommended: Micro-spray device Gsdpfsh S Nxdox Agbsbg Clamping pressure regulator Levelling elements

Condition: new, Bandsaw blades available from stock / short-term delivery in a wide range of dimensions, suitable e.g. for horizontal bandsaws from MEBA, Behringer Eisele, Jaespa, Kaltenbach, Kasto, etc. We would be pleased to provide you with a quotation for the bandsaw blades you require. Below are the most common models from MEBA with the corresponding blade dimensions (pitch and blade quality upon request – we are happy to advise you!): Bandsaw Bandsaw Blade Dimensions 230 G/230 DG 2710x27x0.9 mm Godpfeu R Rn Sox Agbebg 260 DG/260DG HS 3350x27x0.9 mm 320 G 3200x27x0.9 mm 320 G HSS/320 DG HSS 3200x34x1.1 mm 260 GP 3350x27x0.9 mm 260 AP 3350x27x0.9 mm / 3700x27x0.9 mm from 3/2006 260 GA 3700x27x0.9 mm 335/G/DG/GA/DGA 4400x34x1.1 mm 300 A 4900x34x1.1 mm 330mat 4900x34x1.1 mm 405 DG 5000x34x1.1 mm 410/410 A/410 DG/410 DGA 5800x41x1.3 mm 510/510 A/510 DG/510 DGA 6100x41x1.3 mm 434mat 6220x41x1.3 mm 400 A/500 A 6220x41x1.3 mm 600 A 7900x54x1.6 mm 800 extreme 9000x67x1.6 mm