Used Ball Screw Drive for sale (25,343)

Condition: like new (used), Year of construction: 2020, operating hours: 14,660 h, functionality: fully functional, Kaeser SK22 Screw Compressor - Premium 11 kW 11 bar 1.86 m³/min Year of manufacture: 2020 Ncedpfoy Av Amjx Afaer Operating hours: 14,660

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Njdpfx Ajy Ecuzjfajcr Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications)

Condition: used, Pressing screw REG-MAC Ncjdpfxsy At Hcj Afaor for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Njdpfx Afjiyyndoajcr Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, Ncsdeiyynwspfx Afasr send us your inquiry or visit us, you´re welcome

Condition: used, machine/vehicle number: IC1333, Year of construction: 2018, operating hours: 5,936 h, load capacity: 1,300 kg, lifting height: 5,000 mm, construction height: 2,235 mm, enginetype: Electric, manufacturer: Jungheinrich Ncjdpoy Eaz Eofx Afaor

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Ncedpfx Ajx Uum Isfaor Technical condition: New

Condition: ready for operation (used), Atlas Copco Compressed Air System – Complete Package: GA26VSD+ + GA18 SP + FX11 + 1,500 L Tank For sale is a used Atlas Copco compressed air system offered as a complete package. System components: Ncjdpfxsy D Ur Ao Afajr Atlas Copco GA26VSD+ Year of manufacture: 2016 Operating hours: approx. 28,000 h Power: 26 kW Max. working pressure: 13 bar Free air delivery: 5.15 m³/min 400 V / 50 Hz / 3 phase Atlas Copco GA18 SP Year of manufacture: 1999 Operating hours: approx. 37,000 h Power: 18.5 kW Max. working pressure: 8 bar Free air delivery: 48.3 l/s Speed: 3,000 rpm Atlas Copco FX11 Refrigeration Dryer Type: FX 11 (A9) Year of manufacture: 2016 Max. compressed air pressure: 13 bar Connection: 230 V Power: 1.64 kW Compressed air receiver 1,500 l Operating hours (as indicated): approx. 22,000 h Last inspection 2024 Control cabinet / without piping / with accessories as shown in the pictures Condition Used. Last maintenance and inspection in 2024. Visual condition as per photos. Sale preferably as a complete package. Notes Viewing by appointment possible and recommended Collection / dismantling / loading by arrangement Sale primarily to commercial customers Invoice will be issued

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Ncodpfx Aowbf U Nofasr

Year of construction: 2009, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table Nedpfx Aexln T Hsfaecr -Manufacturer: RK Rose Krieger, Flat short-stroke linear axis for manual adjustment -Type: unfortunately without type designation -Travel: 25 mm -Position indicator: Fiama OP3A -Number: 1x linear axis available -Dimensions: 315/135/H55 mm -Weight: 3.3 kg

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Nsdpfey D R Srsx Afascr Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: B301000018, mileage: 619 km, first registration: 01/2019, overall weight: 6,500 kg, color: red, axle configuration: 4x4, fuel: diesel, fuel type: diesel, Year of construction: 2019, operating hours: 619 h, We offer this very good Skyjack SJ46AJ boom lift with 4x4 drive, year of manufacture 2019. This powerful and stable aerial platform is ideal for working at height, even on rough terrain. Manufacturer: Skyjack Model: SJ46AJ Year of manufacture: 2019 Drive: 4x4 diesel Operating hours: 619 Working height: 16 meters Own weight: 6,500 kg Nodey D Nm Uopfx Afaocr If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 Njdpfx Asy D Nghefascr 1984 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 52 mm, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 8 mm, Flat Die Thread Rolling Machine Ingramatic RP2 V # 408 Year of manufacture: 1984 Output: 200-410 pieces per minute Nedpfjy D Na Uex Afascr Diameter: 3.5-8 mm Blank length: 6-90 mm Thread length: 52 mm Tool dimensions: 130/115x30x54 Power: 12 kW

Condition: reconditioned (used), complete plastification unit for DEMAG 2.300 unit with 80 mm screw and barrel Nedpfx Afofwcttoajcr

Condition: refurbished (used), Guarantee in months: 12 Nedpfx Afoi Da S Soascr Item No.: Mitsubishi MDS-C1-V2-3520 Servo Drive This is a service exchange item, a deposit is also required of 3000 EUR, which will be refunded upon receipt of your faulty unit. *All service exchange items are subject to inspection, prior to any refund. If the service exchange item is beyond repair, the service exchange cost will not be refunded. However, a full report can be made available.*

Condition: good (used), Year of construction: 2021, Screw compressor ALMIG Fdrive 30, year of manufacture 2021, last serviced in 09/2025 at 22,138 operating hours. Nodpey D Dycefx Afajcr

Condition: reconditioned (used), Exchange part, inspected, tested, with 12 months warranty. Immediately available. Data transfer possible if the old unit or data set is provided in advance. Ncedpfxoy D Dvde Afaor You only need to install the unit. Various sizes in stock. Return of old part required.

Condition: used, Auger diameter: 35 cm Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Nsdpfx Afexz R Raeaocr Infeed height: 175 cm

Condition: used, Wickman 1-3/4" 6-Spindle Nsdpfjyzkf Hex Afaocr SN: 16814 Electromagnetic Clutch Stock Reel and Stand Threading Chip Conveyor 6 Cross Slides 4th Pos. Logan Universal Threading Cleaned and Painted Recently taken out of Production Checked under power Can be equipped for your requirements

Condition: new, functionality: fully functional, power: 320 kW (435.08 HP), fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, color: red, gearing type: automatic, Year of construction: 2025, Equipment: air conditioning, all wheel drive, differential lock, trailer coupling, From our immediately available new vehicle stock, we offer you: Rescue Firefighting Vehicle HLF 20 or Rescue Tank Firefighting Vehicle HTLF4000 Do you require a new HLF for your extensive firefighting and technical assistance operations? Do you also need a powerful TLF with a large water tank and foam agent reservoir to ensure firefighting water supply? ...and perhaps you have space and budget constraints and cannot wait long for new technology? Then we have the immediately available solution for you, which we are happy to tailor to your individual needs and requirements! Chassis: • MAN TGM 18.320 4x4 with 320 HP (235kW), GVW 18 t with automatic transmission • Dimensions: 7,900 mm x 2,500 mm x 3,200 mm (LxWxH) • All-terrain tires, dual tires on rear axle for maximum driving stability Cab: • Crew cabin (1:8) in RAL 3000 (fire red) with air conditioning and auxiliary heater • 2 breathing apparatus holders in the crew compartment as standard Body: • High-quality, frame-type construction using rustproof and corrosion-free materials • Fold-out steps for each side equipment compartment • Customizable stainless steel equipment storage according to your specifications • Walkable, anti-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high-pressure pump FPN 3000-10 with pump & roll capability • Output: 3,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam proportioning system • Water tank: 4,000 l with integrated foam agent tank: 400 l • Auxiliary heater in pump compartment Firefighting Equipment: • High-pressure rapid intervention system with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on the roof/2 LED front flashers Ncodpoxg R R Dsfx Afasr • Pneumatic special signal system Martin-Horn • 100 W loudspeaker system with announcement unit • Rearview camera • Comprehensive LED lighting in the crew and all equipment compartments • LED scene lighting on the superstructure and auxiliary spotlights • Pneumatic LED light mast with remote control • Hygiene board We are happy to provide you with a detailed quotation and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer but serves as information only. Subject to prior sale!

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min Ncjdpjxzu Ehsfx Afajr • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, parking heater, trailer coupling, From our range of new vehicles, we offer you: TLF 3000 All-Wheel Drive on a rugged MAN TGM 13.290 4x4 Off-road Chassis This vehicle is ideal for small and medium-sized fire departments in rural areas looking for a compact and robust truck capable of handling a wide variety of tasks while providing a large water supply. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with matching track for excellent off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Bodywork: • High-quality frame construction using stainless and corrosion-free materials • Folding steps for each side equipment compartment • Customizable stainless steel equipment mountings to your specifications • Walkable, non-slip roof Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL capable • Output 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating in the pump compartment Firefighting Equipment: • High-pressure rapid intervention line with 50 m of rigid hose • Foam/water monitor (2,000 l/min) mounted on the roof • Self-protection system with 4 nozzles in front of the wheels Safety and Lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system (Martin horn) • 100 W public address system with microphone • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the superstructure plus additional work lights • Pneumatic LED light mast with remote control • Optional hygiene board available We would be pleased to provide you with a detailed offer and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, no guarantee for completeness or accuracy. This advertisement constitutes information only and does not represent a binding offer. Subject to prior sale! Nodpexyunasfx Afascr

Condition: used, power: 368 kW (500.34 HP), fuel type: diesel, fuel: diesel, gearing type: mechanical, Year of construction: 2008, GVW: 9.220 kg Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Bridgestone Front tyre size: 315/80 R 22.5 Rear tyre size: 315/80 R 22.5 Please contact PFEIFER GROUP for more information Nsdpfx Ajyqmq Njfaecr

Condition: used, mileage: 45,700 km, Year of construction: 2005, Drivetrain Ncodsyl Huqepfx Afaor Drive: Wheel Weights Empty weight: 36.000 kg Functional Lifting capacity: 45.000 kg Identification Serial number: 53517 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 23085 h Counterweight: 7000 Transport dimensions (LxWxH): 11.5x2.7x3.9 Additional information Please contact PFEIFER GROUP for more information