Used Baler for sale (280)

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hedpfsvq Rtksx Ah Nofb Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Hfodpfxsxl Rqbs Ah Nsb Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm Hfedpfxohzr U Io Ah Neb

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l Hsdpfoxbgnhsx Ah Njfb SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Above-standard productivity Adjustable bale height (three sizes) Hjdeu Tqmdjpfx Ah Nefb Automatic start for efficient compaction Bale trolley for easy transport Material selector for cardboard and plastic Full bale indicator and service indicator Compliance with EN 16500:2014 safety standards

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Hedpfxexd D Nzo Ah Nsfb

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Type: CMG 268 Hsderdwlkjpfx Ah Nofb Waste compactor

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Hedovaw T Aepfx Ah Nsfb

Condition: excellent (used), Year of construction: 2017, operating hours: 12,450 h, machine/vehicle number: 1231, Lefort shear baler 330 Cuts steel and bales material Hodpjv I Utvefx Ah Nsfb very good condition ,remote control included

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. Hfsdpfx Asxbc U Deh Nsb The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Hedpfx Ahjr Dufbj Nsfb We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: like new (used), Press force 24 t 3 phase 3 x 400V, 50 Hz Bale size (W x D x H) 1500 x 800 x 1100 mm Cardboard up to 500 kg Hodpfx Ahjfhb Tbo Nsfb Loading aperture 1500 x 650 mm Dimensions: (W x D x H) 2105 x 1190 x 3185 mm

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Hodpfxjmqi Aks Ah Nefb

Condition: good (used), Year of construction: 1987, Manufacturer: Bergmann Type: PS 8100 Height: 2.200 mm Width: 1.200 mm Length: 1.625 mm Loading height 1.900 mm Weight: 800 kg Nominal current in 400 V 4,8 A Nominal transformator current in 230 V 0,38 A Motor power: 2,2 kW Fuse: 10 A, slow Rotation: 13 ./min Protection: IP 54 Fire class: D, E Hfjdpek E Hh Ssfx Ah Njb Hidraulic oil: HLP 32 Bale weight (depend from the material): 150-400 kg Bale volume: 1 m³

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Hfedpfxjvwlqqo Ah Nsb Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Hfjdpfxjwuk Nrs Ah Nsb Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. The offer concerns the HSM V-Press 605 waste paper baler: - Code produkt : MTP004168 - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm - Depth: 81.5 cm - Height: 198 cm Hfsdpfx Ahjwcpvao Njb - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 413.00.003, pressing force: 60 t, bale weight: 400 kg, TECHNICAL DETAILS Pressing force: 60 t Main drive power: 9.0 kW Hsdpewhqf Tjfx Ah Nsfb Bales Bale dimensions (W x D x H): 1,100 x 1,100 x 800 mm Bale weight: max. 400 kg Binding: 4-fold vertical MACHINE DETAILS Machine dimensions (L x W x H): 6,500 x 1,850 x 2,800 mm Weight: approx. 8,000 kg Electrical system Operating voltage: 400 V Frequency: 50 Hz Total connected load: 28 kW Regular maintenance keeps the baler in good working order.

Year of construction: 2008, condition: good (used), Horizontal baling press Build in 2008 Hfjdpfxog Ibt No Ah Nsb Bale size 800x1000x1400 Loading height 1250mm

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Hfsdpfx Asw Az E Teh Nob

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Hedpfx Ahju Thhro Njfb Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2020, pressing force: 50 t, filling opening width: 670 mm, filling opening length: 1,200 mm, bale length: 1,200 mm, bale weight: 450 kg, total width: 800 mm, total height: 800 mm, power: 7.5 kW (10.20 HP), empty load weight: 2,180 kg, input frequency: 50 Hz, Tested and ready for operation, Vertical baler Dixi 50S PET Year of manufacture: 2020 Bale dimensions (L x W x H, mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Specifications (L x W x H, mm): 1600 x 1300 x 3100 Loading opening (mm): 1200 x 670 Pressing force: 50 tons Power supply: 400 Volt Press immediately ready for use Hedpfxjwviz No Ah Nofb Net price plus VAT Delivery available at extra charge.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 113889, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works and without packaging. Hjdpfx Ahewnpx Es Nsfb The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales/hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / outdoors under cover Serial number: 113889 Year of construction: 2012 We point out the respective original documentation, which can be obtained directly from the manufacturer.

Year of construction: 2025, condition: used, Packaging machines, consisting of: Hfjdpfx Ahewk Dv Dj Nsb 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Hfodpfx Aswrybrjh Njb Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.