Used Bale Clamp for sale (9,118)

Condition: good (used), Clamping device, clamping tool, clamp bracket, clamp clamp, clamp bracket, pipe clamping system, clamp bracket for roller carriers Rcsdpfx Aexhc N Usg Ajh -Clamping bracket: Clamping bracket clamp for roller carriers -Clamping range: Ø approx. 90 mm, see photos -Number: 3x terminal available -Price: per piece -Dimensions: 375/60/H240 mm -Weight: 9.2 kg/piece

Condition: good (used), Baler Hsm 155.1 vl Rjdpfxev Alaco Ag Aoch Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 126-3 High-pressure clamp Jaw width: 125 mm Jaw height: 40 mm Rjdpfx Aoxf U Ahjg Asch Opening width: 177 mm Clamping pressure: 2 / 3 / 4 tons Guide rail height: 62 mm - Clamping force adjustable in 3 stages - High-pressure clamp with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 103 mm Weight: 26 kg Good condition

Condition: used, Gamal Door clamp with loading treppel Rcsdpfx Ageq Rktye Ash

Condition: excellent (used), Year of construction: 2025, Year of manufacture: 2025 Rodsxlugtopfx Ag Aech

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rcjdou Tg I Djpfx Ag Ash Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Rear silencer, exhaust system, muffler, silencer, muffler, couplings, pipe coupling, pipe sleeve, pipe connection, exhaust clamp, pipe connector for exhaust system, double clamp -Manufacturer: HJS, pipe connector exhaust clamp stainless steel double clamp 50 x 90 mm Rodpfx Agjxhcz Rs Aoch -Type: 83122858 -Size: 50/5x54/5x90 -Quantity: 24 x clamp available -Price: per piece, minimum order 3 pieces -Dimensions total: 90/83/62 mm -Weight: 0.6 kg/piece

Condition: excellent (used), Technical data: Rjdpfxov Akmzs Ag Aech Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: excellent (used), functionality: fully functional, Hello, We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Individual acceptance is possible. Spare parts are available. Rcedpswa Ihisfx Ag Aeh The clamps are not for sale. The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Do you have any questions? We would be happy to help.

Condition: refurbished (used), Vertical hydraulic clamp for windows and doors Rjdpfx Agowzat Hs Ajch

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 1,400 kg, empty load weight: 285 kg, construction width: 1,050 mm, opening width: 1,710 mm, Cardboard clamp Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Rcedpju D S Igefx Ag Ash

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: Rjdeu Thx Ropfx Ag Aech The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Clamp holder make Comet FG IIII (28396) for Comet threaded steel FG IIII TR 12 Rodpfjmk E Uisx Ag Aoch

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Rjdpfx Ajv Amv Eog Asch Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: used, Year of construction: 2013, Empty weight: 445 kg SL331G 3000kg SL331G 2013 dimensions: Hight: 1000 mm Wide: 1200 mm Length: 1300 mm Article nr.: W322999002-veiling Redpexh Ezmsfx Ag Asch Used Stone clamp 3000kg SL331G

Condition: good (used), Internal item no.: 25065 25 pcs. shrink fit holders HSK-A63 5x D4 Rcodpfx Ajxdlpvog Ajh 5x D6 5x D8 5x D12 5x D16 Total length of holders approx. 160 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Mitre range 90° to 30° - Bundle clamping width/height: 0-500 mm / 15-335 mm - Material feed single/multiple: 0-600 mm / 0-9999 mm - Remnant length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min - Cutting pressure: stepless hydraulic adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm Rcjdsxg Hr Dspfx Ag Ajh - Power supply: 3x 400 V / N / PE / 50 Hz - Nominal current: 16 A - Machine weight: approx. 1700 kg - Machine dimensions W x H x D: approx. 2500 x 1900 x 2300 mm

Condition: ready for operation (used), Promat Compact Vise Jaw Width: 125 mm Clamping Range: 0–216 / 97–312 mm Jaw Height: 40 mm Rcsdpfx Aexghfleg Ash Overall Length: 463 mm Clamping Force: approx. 40 kN Accessories: - 2 pcs. clamping claws SPE for T-slot - 1x Promat workpiece stop You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can also issue a net invoice, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to view more of our offers. Company names and trademarks mentioned are property of their respective owners and are used for identification and descriptive purposes only. Deviations in technical data and errors in the item description are possible and reserved.

Condition: excellent (used), Pneumatic power clamp Make DESTACO type 82L 3G-251C8HO used from machine dismantling length 200 mm width 35 mm height 75 mm 2 x available Rcsdpeq Evraefx Ag Ajh

Condition: excellent (used), The forklift is in excellent technical and visual condition. A new battery was installed in 2021, and a new hydraulic pump was installed in December 2019 at 9966 operating hours. Specifications: Redpouhx I Eefx Ag Asch Maximum lifting height: 4.5 m Maximum height with mast lowered: 275 cm Third and fourth hydraulic functions available Standard fork dimensions: Length: 115 cm Width: 10 cm Thickness: 4 cm Additional options: Can be purchased with a clamp (additionally or instead of standard forks) for blocks, styrofoam, paper, etc. Minimum clamp opening width: 50 cm Maximum clamp opening width: 160 cm Clamp length: 160 cm Clamp height: 100 cm The forklift is ready to work and requires no additional investment.

Condition: good (used), Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw Rjdpsiqy Thsfx Ag Aech -Pipe clamps: Two-part pipe clamp according to DIN 3567 -Type: DN400 / d1 = 406.4mm / 16" -Material: ST37-2 -Connecting elements: can be supplied at extra cost -Quantity: 40 set -Price: per set -Dimension: 570/220/H70 mm -Weight.: 8 kg/set

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available. Redpfx Aexciwzog Aech

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5536, pressing force: 50 t, filling opening width: 1,252 mm, filling opening length: 1,100 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, total width: 3,000 mm, total height: 3,000 mm, total length: 9,500 mm, feed length X-axis: 1,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 1,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 100 A, overall weight: 16,000 kg, noise level: 80 dB, pressure: 250 bar, pressure (max.): 250 bar, opening width: 1,100 mm, control cabinet height: 1,700 mm, control cabinet width: 700 mm, control cabinet length: 900 mm, oil tank capacity: 600 l, power: 45 kW (61.18 HP), empty load weight: 16,000 kg, volume flow: 16,000 m³/h, operating pressure: 200 bar, transport width: 3,000 mm, protection type (IP code): IP55, Equipment: compressor, documentation/manual, Presona LP50VH3, and as a bonus, you also get the Presona PP1500-500. The PP1500-500 is actually an auxiliary device used for specific tasks, such as precise cutting or additional processing of material, which the base machine itself does not handle. So the PP1500-500 is there to allow you to perform additional specialized operations that the main machine cannot do. Rcjdpfx Aoxfr Aljg Aeh

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm Rcodekm Rm Aopfx Ag Ash -Weight: 35 kg

Condition: used, Mechanical NC Machine Vice BISON Precision machine vice, clamp Jaw width: 150 mm Jaw height: 40 mm Clamping range: 0 to 210 mm Clamping force: approx. 3 tons Guideway height: 52 mm Guideway length: 425 mm - Mechanical machine vice - Quick adjustment with ball-locking mechanism - Clamping range via trapezoidal spindle approx. 55 mm - Robust base body, ground on all sides Rcjdsxcbpcjpfx Ag Ash - Can be mounted horizontally, vertically, or laterally - Guideway with 18 and 20 mm T-slot Dimensions (L x W x H): 425 x 150 x 110 mm Weight: 27 kg Good condition