Used Asv Pt 100 for sale (25,220)

Condition: used, spindle diameter 125 mm x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm Bjdpfx Ajyt R Anol Rswr The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), 100,000 liter stainless steel tank, insulated It has a heating coil running along the entire height of the tank Wed. 3.15m Bjdpen E N N Eefx Al Rswr Height 16.50m

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. Bodpfx Ajxv Dv Ejl Rewr The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, Year of construction: 2023, Semi-Autom. Screen Printing Machine TIC SC1000 OptiPass Bwedohrdn Ispfx Al Rsr Curve printing machine, stand model, printing size: 200x700mm or printing ø: 600x700mm (Attention: when ø 600mm no 360° all-round printing possible), max. screen frame size: 930x530x30mm. Machine with base frame and height-adjustable feeding table incl. x/y-adjustment. Height adjustment of the feeding table: approx. 250mm, therefore max. height of the printing object: approx. 600mm. With safety frame all-around the sides of the upper frame, equipped with 2sets of squeegee, motor-controlled lateral frame movement for curve printing and rotation of the printing object, machine control via touch-panel, registering by optical sensor, when printing in multi-colour-mode register accuracy is approx. 1mm, drive components 'Made in Japan', compressed air connection: 6bar, supply voltage: 230V, 50Hz Electro-pneumatic machine, micro-processor control. Curve printing machine with universal reception for cylindrical objects as well as optical fitting system for multi-colour printing, with inflation device, printing movements separately adjustable during set-up operation, squeegee stroke, squeegee speed and floodbar infinitely adjustable Delivery time 16-18 weeks

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Bwodpfjx Rqlfex Al Rsr Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002569 The Mettler Toledo InPro 3253/225/PT1000 is a highly specialized sensor typically used in industrial applications for measuring pH, ORP (oxidation-reduction potential), or temperature in harsh conditions. It is part of the InPro series from Mettler Toledo, which produces high-quality sensors for process automation pH or ORP sensor: The sensor can measure the acidity or alkalinity (pH) or the potential difference between two electrodes (ORP), which is crucial in many industrial processes, like chemical manufacturing, water treatment, and food processing 1. Type: pH or ORP sensor: The sensor can measure the acidity or alkalinity (pH) or the potential difference between two electrodes (ORP), which is crucial in many industrial processes, like chemical manufacturing, water treatment, and food processing. 2. Application: This sensor is suitable for liquid measurements in aggressive or challenging environments. It can be used in a variety of industries, including pharmaceuticals, chemicals, water treatment, and food production. 3. Design: The sensor features a robust design with high chemical resistance and high temperature tolerance, making it ideal for environments with aggressive chemicals and fluctuating temperatures. 4. PT1000 Temperature Sensor: The model includes a PT1000 temperature sensor. This is a type of RTD (resistance temperature detector) that measures the temperature of the process. The PT1000 provides accurate temperature compensation for the pH or ORP readings, ensuring more precise measurements. 5. Mounting: The sensor is designed for easy integration into process systems, typically in industrial process pipelines or tanks. It can be installed in-line or submersible, depending on the application. 6. Electrode Material: The electrode material is typically made from high-quality, durable materials like glass or ceramic, ensuring long life and stability even in corrosive environments. 7. Calibration: It usually supports automatic calibration features, making maintenance simpler and enhancing its reliability. 8. Temperature Range: The sensor can measure over a wide temperature range, often from 0°C to 130°C or higher, depending on the specific model and application. 9. Compatibility: It is typically compatible with Mettler Toledo process transmitters and analyzers, ensuring seamless integration into existing monitoring systems. Bsdpfx Aoxv Dwcol Rowr 10. Durability: The sensor is built to handle rugged environments, with high pressure, high flow rates, and vibration resistance, typical in industrial setting

Condition: new, Year of construction: 2026, Machine type: BPT 1000 Manufacturer: ERBA Power: 2 x 5.5 kW Total volume: 1,000 L Bwodoyq Rcpjpfx Al Ror Description: The ERBA BPT 1000 twin-motor long trough vibratory finishing machine is ideal for ball polishing or processing heavy workpieces. Thanks to its two motors, it can handle even particularly heavy media loads and applies the necessary pressure to the workpieces. It is equipped with a durable hot-cast polyurethane lining. Emptying or separation is performed via a bottom outlet (manual/pneumatic). The process chamber can be partitioned using removable dividers, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be fitted with fully automatic PLC process control. The motor speed can be infinitely adjusted by means of a frequency converter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The listed price is net, plus the currently applicable statutory VAT and freight costs. The pictures may show the system including optional accessories, which are available at additional cost. The quoted price refers to the base machine. The photos are for illustrative purposes. Actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We are happy to provide you with a consultation, with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer is for presentation purposes only. Contract negotiations take place via telecommunication (Email, phone, messaging portal). Initially, we will send you a non-binding quote, along with our general terms and conditions including imprint and information on the right of withdrawal, before any purchase/contract is concluded.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 7163-AI, load capacity: 1,000 kg, empty load weight: 420 kg, load capacity per storage section: 1,000 kg, operating hours: 234 h, BT OPTIO TSE100W-713 Tow Tractor, Year of Manufacture 2018 Specifications: BT OPTIO TSE100W-713 Bwsdpfx Alex Sydte Rjr Year of Manufacture: 2018 Recorded Operating Hours (h): 234 Load Capacity (kg): 1000 Own Weight (kg): 420 Front Tyres: Polyurethane Rear Tyres: Polyurethane Battery Year of Manufacture: 2022 Battery Capacity (Ah): 105 Battery Voltage (V): 24 (2 x 12 V) Additional Equipment: Blue safety lamp at front.

Condition: new, Year of construction: 2025, functionality: fully functional, filling weight (max.): 20,000 g, Gear pump unit with 20-liter capacity and 4 connections for 4 hot melt hoses. Temperature sensor PT100. Temperature sensor Ni120 available on request. If you have any further questions, we are at your disposal. Bwsdpfoxa Azhex Al Ror

Year of construction: 2024, condition: as good as new (ex-display), -Usable internal dimensions: D = 970 mm, H = 540 mm (other sizes available upon request) -Touch screen -Spray pressure: 3 bar -Basket load: 200 kg -Tank volume: 210 L -Standard accessories: • Oil skimmer • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Reinforced basket made of stainless steel • Electric pump made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) Bwjdpfx Alef A Nq Us Rjr • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg Bodpjzry Icsfx Al Rjwr - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Toothed belt, sold by the metre, 100 mm, suitable for Reinhardt saws. Bsdpfjzrxv Ejx Al Rowr Technical data: - Condition: As new - Width: 100 mm

Condition: used, Technical data: - Pressure: 100 bar - Capacity: 2 L - Motor: 0.75 kW Bedpfxszrxune Al Rewr

Condition: used, Technical data: - Available: 4 Bedpfx Aszrxpfsl Rewr

Condition: used, Year of construction: 2015, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser Bedpfx Aozrwc Djl Rjwr If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1997, pressing force: 102 t, overall weight: 9,700 kg, Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details. Bsdpfx Alezrw Hij Rjwr • Bending length: 3,300 mm • Spindle motor power: 11 kW Technical Specification Bending Length 3300 mm

Condition: used, machine/vehicle number: 008521, Max. panel width: 1000 mm Max. panel length: 2400 mm Bwodpfx Ajzruyajl Ror

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive Bodpfszrlixsx Al Rowr -Type: MAXAX 100/3000 -Input: 1.5 kVA -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm -Weight: 2.8 kg/pc.

Condition: used, Year of construction: 2010, The machine is powered and can be inspected. Max. machining diameter: 280 mm Max. machining length: 409 mm Bar capacity (main spindle): 52 mm Main spindle: Chuck size: 6 inches Max. speed: 6,000 rpm Motor power: 15 kW (40% duty cycle), 11 kW (continuous operation) Max. torque: 184 Nm Counter spindle: Chuck size: 5 inches Max. speed: 6,000 rpm Motor power: 11 kW (25% duty cycle), 7.5 kW (continuous operation) Max. torque: 90 Nm Tool turret: Number of stations: 12 Max. speed of driven tools: 5,000 rpm Motor power (milling spindle): 5.5 kW (40% duty cycle), 3.7 kW (Continuous operation) Max. torque (milling spindle): 47 Nm Travel ranges: X-axis: 187 mm Y-axis: 100 mm Z-axis: 510 mm W-axis (counter spindle): 460 mm Rapid traverse speeds: X/Z-axis: 33 m/min Y-axis: 21 m/min W-axis: 30 m/min CNC control: MAZATROL SmoothG Machine weight: approx. 3,600–4,720 kg (depending on model) Bwjdewk Hwqspfx Al Rsr Dimensions (L × W × H): approx. 2,400 × 1,800 × 2,000 mm Special features Multi-tasking capability: Turning, milling, Y-axis, and counter spindle enable complex machining operations in one Clamping. Integrated motor spindles: Both the main and counter spindles feature integrated motors that minimize vibration and ensure high machining accuracy. Y-axis machining: Enables the machining of complex workpieces with high precision.

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Bwedpezrhqlsfx Al Rjr

Year of construction: 2021, condition: good (used), Sole cleaning machine, shoe cleaning machine -Manufacturer: Today, sole cleaning machine, shoe cleaning machine -Type: Solamat 100 -Power supply: 230 volts -4 roller brushes: for the soles (nylon) Bwjdpozrfykofx Al Rer -2 round brushes: (nylon) for the side edges -1 Upper leather brush: (horsehair) -Dimensions: 560/460/H1090 mm -Weight: 59 kg

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg Bwedezcc Rcspfx Al Rjr ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey Bjdpfx Alewnprxj Rswr

Condition: good (used), Year of construction: 1995, Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 -Clamping: pneumatic -Control: Z3BF UNIT Bodpfxoy Tax Hs Al Rswr -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar 52 mm/sec. 700 x 400 mm Bedpfx Aswir Dgjl Rowr 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules