Used Arc Welding Device for sale (16,639)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Nedpfx Aoyqr Sxslnecu

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Peak height: 870 mm -Speed: electrically continuously variable 0-3 rpm -Drive: Servo motor 1/1.6 kW with cooling, see photo of nameplate Nedsxm Sqrepfx Alnocu -Direction of rotation: Right/left rotation -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg

Condition: used, MIG / MAG Pulse Inverter Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Nedpfoyxy Tbjx Alnecu Infinitely adjustable output range Open-circuit voltage: approx. 50 volts / approx. 30 volts Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special and spot welding - Separate 4-roller wire feed unit FRONIUS Type VR 152 with approx. 1.5 m connection hose package - 4 meter hose package NEW, with FRONIUS central connection - external Fronius water cooling unit Type FK 71 - Welding gas pressure reducer NEW - Equipped with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and electrode welding. Accessories for TIG and stick electrode welding are not included in the scope of delivery.

Condition: good (used), machine/vehicle number: 202 0239, range of control current flow: 25 - 190 A range of control alternating flow: 25 - 190 A Nodpjcvbu Rsfx Alnscu current flow 60% ED: 190 A current flow 100% ED: 160 A alternating flow 60% ED: 170 A alternating flow 100%ED: 160 A space needed: 1200 x 600 x 800 mm weight: 300 kg

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Njdpfelddxhex Alnocu Strip width: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: used, WIG welding machine, electric welding unit KESTRA, type WIG 350 AC/DC Electric welding machine Manufacturer's No. / Year of manufacture approx. 1985 Nsdpfx Aljdzql Sjnscu Power output 350 Amps = 60% duty cycle Setting range: 3 stages and fine adjustment Welding current: AC / DC Mains connection: 400 Volts, 50 Hz, 32 Amp plug - 4 meter hose pack with WIG torch - 2-cycle / 4-cycle welding unit - Water-cooled - Gas pressure regulator Space requirement L x W x H: 1050 x 560 x 900 mm Weight: 250 kg The welding test yields good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition does not function; the arc can be ignited by briefly making contact.

Condition: used, Inverter welding machine for manual arc welding, TECHNOLIT Type PROFImat 170 Plus MMA welding machine, inverter welding machine, manual arc welding inverter New - unused Serial No.: TB1703500316 Article No.: 440030 Year of manufacture: 2022 Output WIG (DC) 170 amps, 45% duty cycle 150 amps, 60% duty cycle 135 amps, 100% duty cycle Output manual arc welding 170 amps, 35% duty cycle 145 amps, 60% duty cycle 125 amps, 100% duty cycle Adjustment range 5-170 amps, continuously adjustable Mains connection 230 volts, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting the welding process for electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Stick electrode welding, suitable for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with a 230-volt Schuko plug - S-mark for welding under increased electrical hazard Ncsdji E Iz Ispfx Alnou - Overvoltage protection Dimensions (device without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW - unused, from stock

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Njdpfx Ajvg Rh Tolnecu Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Ncsdpfx Alodzqa Hsnsu Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable Ncsdpfx Aljdzqacjneu - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Nodpod N E Rvefx Alnjcu Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N Njdpfx Alopy Uzyonscu - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, total height: 220 mm, total width: 230 mm, total length: 470 mm, input voltage: 400 V, ground cable length: 2,500 mm, overall weight: 40 kg, type of cooling: air, electrical fuse: 32 A, protection type (IP code): IP23, welding current (max.): 800 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2019 Including welding torch A12 - gas, 5 m length, with protective gas stand PSS-2 and ARC 6 to 12 mm gas device accessories. Application: Especially suitable for thicker sheets from approx. 2 mm Features: Microcontroller control Function monitoring Error code display Ncjdpfx Aloyrttmjnju Lift-off test Safety: Integrated mains filter Optimal for construction sites with high mains voltage fluctuations EMC testing High voltage testing Re-trigger lock Thermal monitoring of the transformer Thermally controlled fan Consistent separation of control from welding cables Cooling air tunnel Maximum protection against external interference Protection class IP 23

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Njdpfeyrg Hyex Alnocu

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Nsdsyrg H Hepfx Alnscu

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Njdpfxoq Ttz No Alnocu

Condition: ready for operation (used), Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible. Ncjdou N Hc Aopfx Alnou

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner Nsdpfxod Nlf Ne Alnocu -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Condition: good (used), Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A Ncedpjlpi S Nofx Alnju -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Condition: good (used), continuous welding machine, film welding machine Ncodpfjvyq Duox Alneu -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding power: max. 300 A -Welding cable with: electrode clamp -Ground cable -Number: 1x welding machines available Ncedpod I Szqjfx Alnju -Price: per piece -Dimensions: 600/1230/H930 mm -Weight: 294 kg

Condition: used, Welding device, welding device -Transfer in current condition as seen Nsdecti Aiopfx Alnjcu -pneumatic: exciting -Dimensions: 210/170/H370 mm -Weight: 11.3 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources Ncedpod Ih Dasfx Alnsu -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) Nedexf Uw Sspfx Alnecu 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Ncodpfx Ajhwhnyolneu Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. I also have welders in different sizes and types.