Used Arboga U2508 for sale (9)

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm Pgodpfoxu U Suex Adnow - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! Pgsdpfexnvrvsx Adnjw €2,800.00 EX VAT!

Condition: used, functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, spindle mount: MK 3, type of input current: three-phase, table length: 560 mm, table width: 250 mm, 3 Phase 380V, 2-speed motor is running fine! Geared head with 8 spindle speeds. Spindle RPM adjustable from 100 up to 2900. Drilling & milling possible. Table size: 560x250mm MT3 spindle taper. Pgedpfx Adoxdb T Djnsw Head height adjustable. Head can be angled. Maximum drilling depth: 115mm Made in Sweden. Overall dimensions: 100x75x170cm Weight: 260KG – Return spring is not functioning properly. Contact us for shipping possibilities! € 2.850,00

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 25 mm throat 270 mm bore stroke 130 mm taper MK 3 MK table-size 500 x 350 mm turning speeds 100 - 2750 U/min connected load frequency 400 V Podpfx Adoxz Hgwenogw total power requirement 1,1 KW weight of the machine ca. 0,22 t dimensions 0,8 x 0,6 x 1,8 m

Condition: good (used), – MK3 Pedpfexbuqdsx Adnsgw – 100/1280 rpm – 2-pole motor – emergency stop – protective cover – 380V

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical data: - Drilling capacity in steel ST 60 25 mm - Drilling spindle holder MK 3 - 8 drilling spindle speeds 100 - 2700 rpm - drill spindle stroke 130 mm - 4 feeds 0.1 - 0.3 m/rev - Overhang 270 mm Pgjdpfx Adofmh R Usnjw - Column diameter 115 mm - drilling unit + table height adjustable -with crank handle over rack - Table dimension 350 mm - Drive 400 V / 0.8 / 1.1 kW - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 250 kg

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg Psdpfx Adoy R Thsnegw

Condition: used, Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm Pgedpfxedyb Htj Adnew -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Condition: used, Recording MK 3 Drilling capacity 30 mm Quill stroke: 200 mm Drilling and milling unit can be swivelled 45° to the left and right Pedpfev Rnhfex Adnogw Automatic motorized feed for the X-axis Coolant pump