Used Angular Transfer for sale (3,793)

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine Ledpfx Afegylrasfsta -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Ledpfxsr I E Ite Affota Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, TECHNICAL DETAILS - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround - Post 6, radial drilling 30/60 - Post 7, CNC turning 2 axes Ledpfx Asuhbwcoffsta - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2022438, type of input current: AC, power: 28 kW (38.07 HP), input voltage: 400 V, Equipment: documentation/manual, Monti Antonio 200 VSP-2250x1600 Thermal Press – As New Condition (Year of Manufacture: 2023) For sale is a nearly new Monti Antonio 200 VSP-2250x1600 thermal printing press (year of manufacture 2023, serial number 2022438). The system has been used exclusively for sublimation printing on blankets and is in perfect, fully operational condition. Technical specifications: Year of manufacture: 2023 Serial number: 2022438 Connected load: 28.7 kW Power supply: 400 V / 3~ / 50 Hz Working area: 2250 x 1600 mm Net weight: approx. 5,870 kg Condition: as new, fully functional Application options: Sublimation printing (textiles, blankets, large formats) Laminating, bonding Ltedpow Skhujfx Affoa Thermal transfer and finishing processes Also suitable for applications in advertising technology and industrial textile printing The machine is immediately available and can be inspected on site by appointment.

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Lodpfx Afoi Ew Dpofsta

Condition: excellent (used), Year of construction: 1996, I sell the complete saw mill angular saw. Manufacturer: WEP Gamota, Slovakia Model angular saw: UP1000 Year 1996. Cutting length up to 13,00m. Carriage suitable for lengths 2,00 up to 14,00m Wood diameter 1000mm. Ltsdpswdn Uksfx Affja Saw blades 550mm Motors 15 + 18,5 KW Very good condition. Available immediately.

Condition: good (used), Year of construction: 2001, Angular interlinked double-sided grinder with washing machine and automatic dryer Grinding and polishing function, Ltsdpfx Afsrci Uxofea A total of 40 spindle motors, Connected load: 160 kW / 400 V / 50 Hz, Rated current: 265 A, Max. Glass size: 3500 x 1800 mm, Min. glass size: 350 x 200 mm, Glass thickness: 4 to 10 mm.

Year of construction: 2000, condition: ready for operation (used), Labeling transfer table Ltedpsd N Ehyefx Affea Built in 2000

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : Lodpfx Afeu N Ivqjfjta * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: new, Year of construction: 2025, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. We offer the best technical solutions and competitive prices Ljdjvv H Uuspfx Affota * Office in France and Germany, Contact us for more information and quotations

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Lsdpfop S Sq Dsx Affeta

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Ltodpfohw Dfyox Affsa Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Available immediately.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 diameter range: 8-16 mm number of dies: 2 Ltodpfx Afewi Tavefea number of stations (incl. cut off): 4 cutting length: 160 mm shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse

Year of construction: 1998, condition: used, machine/vehicle number: 12074, Standard equipment Ledpfjbriwrox Affota

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] Lodpsuhbwiofx Affsta EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Ledpfstq U A Isx Affeta

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M08E/7120, Offer Number: M08E/7120 Machinetype: 8 die - 8 blow transfer header Info: bushing cut-off Ltodewi Tapepfx Affoa Make: LACHAUSSEE Type: Fo 10 - 712 Constr. year: 1984 diameter range: 6,5 mm number of dies: 8 number of stations (incl. cut off): 9 cutting length: 6-10 mm output - pieces/min: 150 Location: Europe

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] Ledpfx Afjv Rgy Hsfota - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: ready for operation (used), Year of construction: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier. Ljdpfx Afjwv Um Defsta

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M08L/7516, Offer Number: M08L/7516 Ljdpfx Ajwi S Tnsffota Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB1 Constr. year: 1970 diameter range: 12 mm number of dies: 4 number of stations: 5 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 125 press power: 65 to Location: In our warehouse

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 Ljdev Rgyyjpfx Affota - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Ltodpfxou T Rg Rj Affsa

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Ltjdpfx Afju T Rhbefsa

Condition: ready for operation (used), A Baader Lino poultry buffer system is available. Ltjdpst Nhmuefx Affea

Condition: ready for operation (used), Year of construction: 2012, A special-purpose rotary transfer machine for aluminum processing, rebuilt by Stöferle, is available. 1) Complete machine, connected load: 120kW, hydraulic pressure: 50bar, pneumatic pressure: 6bar, transport width: approx. 2600mm, stations: 8, machine dimensions X/Y/Z: approx. 3000mm/2600mm/2800mm, weight: approx. 9500kg. 2) Coolant system Knoll with scraper belt conveyor, year of manufacture: 2010. 3) Hydraulic system Hydropa. 4) Pneumatic system Festo. 5) Central lubrication system ALS. Documentation available. An on-site inspection is possible. Ledpfx Afsw Rqw Tofota