Used Angle Grinder for sale (7,883)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning Djdpfxebrptvs Albjwb • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 630 mm, grinding width: 200 mm, total length: 2,710 mm, total width: 1,288 mm, workpiece weight (max.): 130 kg, grinding wheel diameter: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 3,200 rpm, overall weight: 1,900 kg, grinding spindle motor power: 2 W, Equipment: CE marking, documentation/manual, The grinder is equipped with a two-axis digital measuring system, Magnenescale LG 20 (formerly Sony), manufactured by Vojus, a.s., Povážská Bystrica, year of manufacture 2000. The machine was manufactured according to CE (European conformity) standards. Accessories: balancer, flanges for grinding wheels, technical documentation. The machine has automatic feed in the transverse working axis; this is the top model from the manufacturer. Technical parameters: Max. grinding length 630 mm, Clamping magnet: 200 x 600 mm, Max. height between the table surface and the center of the grinding spindle: 525 mm, Grinding wheel speed: 3200 rpm, Maximum distance of the spindle axis from the table: 425 mm, Vertical manual feed of the grinding spindle: 0.002 - 0.03 mm and manual: 0.25 (0.5) mm/rev, Grinding wheel (diameter x width x bore): 250 x 20 x 75 mm, Max. workpiece weight: 130 kg, Spindle electric motor: 2.2 kW, Dimensions (l x w x h): 2710 x 1288 mm, machine weight 1900 kg. The grinder is in good technical condition and can be fully tested in our warehouse in Přerov. Dsdpfxjzz Amaj Albewb

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt Dwodpfx Alsvn U Adobsb wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: good (used), Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine, grinding machine, angle grinder, thread drill grinding machine, bench grinder -Manufacturer: Affilatrici, drill and tool grinding machine type 3M 4/60 -Grinding wheels: installed Ø 180 mm, see photos -Motor power: 1.5 kW -Speed: 2800 rpm -Chuck: Ø 160 mm / Bore Ø 60 mm -Accessories: Centering MK1, 2, 4.5 Dwedpfx Aozrfrtjlbob -Coolant system: -Dimensions: 1080/945/H1300 mm -Weight: 370 kg

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, overall weight: 8,000 kg, JUNKERS FLUTEMAT: a CNC machine for highly flexible groove grinding. The FLUTEMAT is the perfect machine for creating grooves in various tool types. For example: • Application: Grinding 3 or 4 chip and flute grooves in HSS taps, milling cutters, and reamers. • Workpiece diameter: Diameter from 2 to 16 mm. • Clamping system: The thread tool is precisely fixed in a square clamping device and the tailstock center. • In-process dressing: A CNC-controlled dressing unit is located directly behind the grinding spindle. • Enormous speed: a cycle time of approx. 75 seconds for an M12 HSS tap. • Design: The machine features a vibration-damping machine bed made of mineral cast. • Control: Modern control technology via the company's own Erwin Junker Operator Panel (EJ-OP). • Grinding media: Extremely durable CBN or diamond grinding wheels are used. Dwsdpfx Alezya Hhsbjb • Manufacturer: Erwin Junker Maschinenfabrik GmbH • Model: FLUTEMAT • Year of manufacture: e.g. 2006 • Control: CNC Junker Operator Panel, e.g. Siemens Sinumerik • Workpiece diameter range: approx. 2 – 16 mm • Total workpiece length: Max. e.g. 150 mm • Number of grooves: 3- or 4-groove tools (straight and helical grooves) • Grinding spindle drive: e.g. 7.5 kW / 11 kW • Grinding media: Designed for CBN and diamond grinding wheels • Dressing unit: Integrated, CNC-controlled in-process dressing unit • Machine bed: Vibration-damping mineral cast • Included accessories: Oil mist extraction, • Coolant system • Robot cell with various clamping tables, • Various grinding wheel flanges, • Documentation/manuals. For more information? For example, a VIDEO is available upon request by email.

Condition: good (used), Storage location number: 3134 Manufacturer: Kuhlmann (Hahn & Kolb) Type: Machine number: Grinding spindle speed: 2,750 rpm Max. collet diameter: 17.5 mm Max. radius to be ground: 10 mm Coarse adjustment of the workpiece carrier: mm Dsdpjzy I D Iofx Albswb Max. fine adjustment of the workpiece carrier: mm Power of the drive motor: 0.25 kW Dimensions: 430 x 450 x 350 mm Weight: 32 kg

Condition: good (used), Year of construction: 2001, Coming soon. Submerged cutting machine for separating hard metal, HSS, glass fiber, carbon fiber, ceramics, and tungsten. Maximum cutting diameter: 50 mm. Cutting disc diameter: 200 mm. Operating documentation is available. When cutting with the UFT 370, the workpiece is completely flooded, which means the cutting disc draws the maximum amount of coolant to the cutting point. This ensures optimal cooling and flushing of both the workpiece and the cutting disc. Djdpfozyyqmex Albewb

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Control: Conventional - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg Djdpfx Alezldvqjbjwb - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Largest distance between centers: 950 mm Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Dedpow Nn Akofx Albjwb Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately

Condition: used, functionality: fully functional, SAMCO Unilev150 edge sander with a 4-roller feed system Specifications: • Condition – used, after a comprehensive inspection • Manufacturer – Samco • Model – Unilev 150 • Working height – 150 mm • Sanding belt dimensions – 150 x 2150 mm • Table dimensions – 22 x 144 cm • One adjustable table, angled between 0-30 degrees • Motor power – 3.0 kW • Pneumatic belt tensioning and oscillation • Adjustable shoe for sanding veneer on one side and the "back" 15x75 cm on the other • Attachment, protractor for angled sanding • 4-roller feed system with a drive belt included Dwjdpfx Ajzd S R Hjlbjb • Dust extraction port – ø 140 mm • Weight – approx. 450 kg • Overall dimensions – 150 x 75 x 165 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual condition of the item for sale • Possibility to switch on and test the device on-site • Free training on machine operation (at our company headquarters) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using our MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a lease loan

Condition: new, neu ca. 2 Wochen ab Auftragse Niederlande 4785 € 100 x 2.000 mm 20 - 76,1 mm 1 1 3 kW 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Dodjwir Dmspfx Albowb Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm

Condition: new, Year of construction: 2026, CORMAK STU75 Metal Belt Grinder The CORMAK STU75 Metal Belt Grinder is an industrial belt grinding machine designed for a wide range of metal finishing applications, including surface grinding, edge finishing, and processing cylindrical components such as pipes and tubes. Thanks to its powerful motor, two-speed belt operation, and carefully engineered working system, the STU75 provides high efficiency, precision, and reliability for everyday industrial use. Key Features Adjustable belt speed: 14.5 / 29 m/s – allows the grinding speed to be matched to the material type and required surface finish quality. Quick belt and abrasive tool replacement – reduces setup times and improves workstation productivity. Grinding head adjustable for vertical and horizontal operation – provides excellent flexibility and enables machining of various workpieces at the optimal angle. Pipe vise with 0–30° angle adjustment – allows precise angled grinding of cylindrical components, ideal for pipe preparation before welding. Complete set of pipe rollers for different diameters – enables quick setup for grinding pipes with diameters up to 60.3 mm. Heavy-duty vibration-damping construction – improves grinding accuracy and operator comfort during extended operation. Dodevu Ukzopfx Albowb Construction and Technology The CORMAK STU75 belt grinder has been designed for versatile operation in demanding industrial environments. Equipped with a Ø200 mm rubber-coated drive wheel and a 120 × 90 mm sliding support with rollers, the machine ensures smooth belt guidance and consistent contact between the abrasive belt and the workpiece. The integrated roller guidance system combined with a spring-loaded belt tensioning mechanism provides safe, stable, and smooth operation of the sanding belt. The rigid construction minimizes vibration, improving both machining accuracy and working comfort. Precision and Performance The combination of a wide 75 × 2000 mm abrasive belt and two selectable grinding speeds ensures excellent performance for both heavy stock removal and fine finishing operations. The adjustable pipe vise and dedicated roller set enable precise tube grinding with repeatable results and stable workpiece positioning. Applications The universal CORMAK STU75 Metal Belt Grinder is suitable for: Manufacturing handrails, balustrades, and steel pipe structures Edge and surface preparation before welding or painting Metalworking departments, tool rooms, and industrial service workshops Small and medium-sized production lines Standard Equipment Ø200 mm rubber-coated drive wheel Sliding support with 120 × 90 mm rollers Pipe grinding vise with 0–30° angle adjustment Roller set for pipe diameters: 20 mm 21.3 mm 26.9 mm 33.7 mm 42.4 mm 48.3 mm 60.3 mm Abrasive belt 75 × 2000 mm Technical Specifications Belt speed 14.5 / 29 m/s Abrasive belt dimensions 75 × 2000 mm Power supply 400 V Motor power 2.2 kW Weight 110 kg Maximum pipe grinding diameter 60.3 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool Djdpjzgu Igsfx Albewb option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Dsdpfx Ajzx Anxolbswb Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Dsdpfx Alozy Ndcebjwb Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 505 IE 2021, tank capacity: 300 l, usable tank capacity: 300 l, total length: 1,120 mm, total width: 1,120 mm, total height: 1,000 mm, inner diameter: 900 mm, outer diameter: 1,000 mm, overall weight: 400 kg, wall material: stainless steel, wall thickness: 25 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 500 mm, manhole location: front, reception height: 500 mm, discharge height: 500 mm, operating temperature: 10 °C, operating pressure: 3 bar, pressure (max.): 2.55 bar, power: 38 kW (51.67 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, The core Thissen & Stecher TSRR series is primarily manufactured as an indirectly heated electric vessel. However, Thissen & Stecher designs for energy input from gas. The specific factory physical and structural dimensions for the TSRR 300-liter core chassis provide the official footprint for this unit: 📐 Structural Dimensions (300L Chassis) Internal Diameter: Ø 900 mm Internal Depth/Height: 500 mm External Width: 1,120 mm External Depth: 1,250 mm External Height: Approx. 1,000 mm to the lip (excluding top-mounted lid clearance/venting arrays). ⚖️ Weight: Net Weight (Empty): The baseline unit weight ranges between 380 kg and 450 kg, depending on the reinforced frame option and agitator configuration. Operating Weight (Full): Approx. 680 kg to 750 kg when loaded to its full 300L liquid capacity. 🔥 Gas Heating & Utility Requirements. Fitted with a gas burner jacket, the unit utilizes an indirect thermal jacket fluid or a direct-fired bottom array. Thermal Power Output: Typically engineered between 38 kW and 44 kW to manage a rapid heat-up curve for a 300L volume. Gas Connection Port: 3/4 inch or 1 inch standard gas line connection. Electrical Supply (For Agitator): Requires a 3-phase 400V / 50Hz connection to power the bottom-driven heavy-duty scraping agitator. Dwodpfx Ajzzxcwelbsb ⚙️ Operational Features: Agitator System: Bottom-driven stable agitator with standard stepless speed regulation from 10 to 60 RPM. Tilt Angle: Built with an integrated 5° oblique slope toward the front outlet valve to guarantee smooth product discharge and improved mixing geometry. Controller: Standard integration of the Aditec MIC 900 microprocessor supporting multi-step cooking programs.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250008, functionality: fully functional, operating hours: 500 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis Dwedpfx Aezymb Sslbeb 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: used, Herkules WS1100 x 7000 CNC roll grinder (re-manufactured by Metex - Year 2011) Dwjdpfx Ajy U Hc Ielbob Model WS1100 x 7000 18 ton capacity 1100mm swing 7000mm between centres Single saddle 700mm chuck Lismar roll inspection Waste conveyor Siemens Sinumerik 840 DSL controls Safety fence

Year of construction: 2025, condition: as good as new (ex-display), Thanks to the AULUMA EXACT, all common double-knife and standard knife blades as well as hedge trimmers can be resharpened quickly and efficiently in highest quality. Dodogvvxrjpfx Albowb Width 3m (maximum blade length in one clamping 2.4m). Versatile Adjustment and Infinitely Variable Grinding Angle This enables grinding of all common types of knives. The knife is fixed clamped and does not need to be adjusted again. The grinding angles of 2 knives may be preselected and changed by means of a quick change switch. The angles can be easily read off via scales. The grinding depth can also be adjusted infinitely. Precise Guidance of the Grinding Machine Thanks to the predefined motion sequences, a constant, uniform grinding can be achieved very quickly. The blades maintain their straight shape – whereas freehand sharpening will damage the knives over time as they lose their shape. Zero-backlash Movements Due to Special Rollers with Ball Bearings Due to the special and robust design, there is almost no wear. The rollers and guides are galvanized and fit together perfectly – allowing for easy and zero-backlash movements. Incl. High-quality Angle Grinder From BOSCH and Special Grinding Wheel The variable speed angle grinder can be easily disassembled and thus used for other purposes. The special ceramic grinding wheel helps to avoid burning of the blades.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Swing 1600 mm Centres 5200 mm Cambering Wheel Size 26” x 2” Djdpfx Alexvrptebjwb Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect.

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 Djdpowya A Sefx Albswb - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional Dedpsxpgwrsfx Albowb - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Dsdpfsrhilxox Albswb Special price €6,500

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 Dodpfxsy S Akpe Albswb FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine – Equipment visible in the photos

Condition: new, Year of construction: 2026, CORMAK SM150D Belt Grinder The CORMAK SM150D belt grinder is an industrial machine designed for intensive operation in production plants, locksmith workshops, and tool rooms. It is a metal belt grinder that combines high grinding efficiency with an effective dust extraction system, ensuring safety, cleanliness, and comfort in everyday use. Its solid steel construction and large worktable surface guarantee stability and precision, even when processing large components. Main Advantages Two belt speeds (14.5 / 29 m/s) – allows adjustment of speed to the type of material and nature of work (coarse or finishing grinding). Integrated dust extraction system – ensures a clean and safe working environment without the need for external dust collection units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large worktable (480 × 150 mm) – allows comfortable handling of larger workpieces. Stepless grinding angle adjustment – enables precise positioning of the belt relative to the workpiece. Quick belt change system – minimizes downtime and improves work efficiency. Design and Technology The stationary CORMAK SM150D grinder is built on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The integrated extraction system provides highly efficient removal of dust and grinding debris. A 2.8 kW motor delivers sufficient power for demanding machining tasks. Precision and Efficiency Thanks to the use of a 150 mm wide and 2000 mm long belt, the machine provides a large contact surface, reducing processing time and increasing efficiency. The two belt speeds allow for a quick switch from aggressive material removal to fine surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the work cycle. Applications The CORMAK SM150D metal belt grinder is suitable for use in: production plants working with steel, stainless steel, and aluminum, welding and locksmith workshops, surface preparation and finishing departments, grinding edges, welds, and flat surfaces. Standard Equipment Stable steel base with tilt adjustment Grinding belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection cover Adjustable protective shield Technical Specifications Parameter Specification Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 14.5 / 29 m/s Motor speed 1400 / 2800 rpm Motor power 2.8 kW Machine dimensions (L × W × H) 700 × 540 × 1130 mm Weight 90 kg Power supply 400 V Extraction port diameter 2 × Ø100 mm Worktable dimensions 480 × 150 mm Djdpfx Aexrzgtelbowb Chip bag diameter Ø100 mm Chip bag length 500 mm