Used All Metal Separator for sale (56,982)

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) Gisdsharwvopfx Ag Rou - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation Gisdpor Ngp Uofx Ag Rsu -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Gjdpfx Ajd Hy Elog Rjiu Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 800 mm Spindle speed: 30–8,000 rpm Spindle taper: ISO 40 Table size: 1,250 x 630 mm Workpiece weight: 1,000 kg Tool changer: 24 positions MACHINE DETAILS Gjdpsyv Ayfofx Ag Reiu CNC control: Heidenhain TNC 426 Dimensions & Weight Space requirements: approx. 4.2 x 3.3 x 3.15 m Machine weight: approx. 7,500 kg

Year of construction: 1987, condition: ready for operation (used), Drill diameter: 65mm, outreach: 380mm, tool holder: SK50, speed: 1600rpm, table dimensions X/Y: 630mm/500mm, rapid traverse Z: 4750mm/min, drilling capacity steel/cast iron: 65mm/80mm, thread cutting capacity steel/cast iron: M68/M72, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2950mm, weight: approx. 2000kg, control: PLC. Including three tool holders, safety enclosure, minimum quantity lubrication system, spare parts and digital readout. Without milling head attachment and drill crown. The control cabinet has optical damage. Documentation available. An on-site inspection is possible. Gisdpoyviyfefx Ag Reu

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank Gjdpewncaiefx Ag Rsiu - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable Gisdjwylvqjpfx Ag Rou - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm Gedpeuv Eygsfx Ag Roiu - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg Gedpfx Aohglvkog Rsiu

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW Gedjtpnpljpfx Ag Reiu - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation Gjdpfx Aokt Nqqsg Rjiu - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm Gsdpfjt Etiyjx Ag Reiu - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting Gsdowd Ii Uopfx Ag Rsiu - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Standard equipment: 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Gisdpfx Agelub Htj Rsu Delivery time: ex stock Waiblingen Beinstein

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK Gsdpfx Agexab Rho Reiu table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 80 - 1125 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm Gjdpfx Aexabyiog Rsiu NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: new, bore capacity in steel (diameter) 55.0 mm throat 300 mm bore stroke 140 mm morse taper 4 MK table: 615 x 430 mm turning speeds 70 - 1200 U/min column diameter 145 mm thread M 30 ST60 thread M 36 GG20 feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm engine output 1.8 / 2.9 kW weight 380 kg Machine height 1850 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP Giodpfx Asxabn Tog Rju - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: used, Manufacturer: Mesutronic Gjdpsxcudmsfx Ag Reiu Throughput: 350 x 80 mm

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 180 mm turning speeds 55-1450 U/min Feed 0,1-0,3 mm/U machine. Nummer 5112 table surface area 620x470 mm spindle taper metric 4 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Gsdpjyqvlcefx Ag Reiu than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm Godsv Ehftspfx Ag Reiu table surface area 720 x 5 mm

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm Gijdpfxoyfwzuj Ag Rou 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 30282, functionality: fully functional, Alzmetall AB 32/SV-RFT20 drilling machine with fixed table in very neat condition. Specifications: Gsdoyanmqopfx Ag Reiu Drilling capacity in steel ST60: 32/40mm Spindle travel: 160mm Tapping capacity: M24/M30 Spindle taper: MK4 Automatic feed in 3 steps: 0.1/0.2/0.3mm Minimum distance spindle-table: 300mm Maximum distance spindle-table: 950mm Distance spindle-column: 300mm Speed: 62-2000rpm variable in 4 steps Table clamping area: 760x770mm Weight: 760kg

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Gedjv S Iqcjpfx Ag Rsiu total power requirement 4 kW

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Machine is ready for use . Gsdsmp Tp Hopfx Ag Reiu

Condition: good (used), Column drilling machine Make ALZMETALL Type:AB 4 SJ ( year 1970 ) with coolant device, infinitely variable speed, with 2 gears. Gsdslq D Akopfx Ag Rsiu Drill hole in steel max: 40 mm Spindle mounting :MK 4 spindle speed : 80 -720 rpm Spindle stroke max : 150 mm feeds : 0.09 / 0,16 /0,28 mm/rev Table diameter : 560 mm Machine ready for use .