Used Airless Paint Sprayer for sale (4,065)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. Rodpfjwzl Hxex Ahzsbt * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, The comfortable Varioflex rack trolley is designed for the flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for easy transportation of the workpieces. Its robust tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and outer support tubes per side, the trolley can carry loads up to 400 kg when evenly distributed. The removable inner and outer support tubes can be taken out if required and reinserted at the back. When not in use, the rack trolley can be compactly folded for space-saving storage. Optional accessories: - Plastic-coated support tubes - Additional rack Technical Data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm (extendable to 1150 mm) Rbsdpfow I Ux Njx Ahzjt Clear distance between the tubes: 70 mm Capacity: 400 kg The image shows optional accessories (additional rack).

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Rbodeu T Hrpjpfx Ahzet Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. +++ Attention: Machine is part of an online auction! +++ Rbedpfx Ahox Ry Rdjzot

Year of construction: 1980, condition: used, Compressed air sprayer, Sprayomat, pressure sprayer, small quantity lubrication, minimum quantity lubrication, plant protection sprayer Rjdpfx Ahjtpyrkozjbt -Manufacturer: Lüfa-Werke, compressed air sprayer Sprayomat -Type: SM 21 -Engine: AEG 0.25 kW -Container: with level indicator -Dimensions: 590/320/H910 mm -Weight: 56 kg

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle Rbjdpfx Ahoc R Iyaozot -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Paint pouring machine, paint pouring machine, paint pouring station, paint pump, emulsion pump, dosing pump -Gearbox: Stöber Type R27-0000-110-4 Rjdsfv H Aiopfx Ahzsbt -Speed: 800 - 1820 rpm -Engine: HEW type EEXF-S/4 -Power: 1.1 kW -Dimensions: 300/400/H935mm -Weight: 43kg

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Rbedpfsfz I Rxex Ahzjt Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Rjdpeia Ta Rjfx Ahzobt Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation - Warranty Rjdpfxjia Taqj Ahzobt Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: mechanical, fuel type: diesel, color: silver, empty load weight: 2,930 kg, axle configuration: 2 axles, emission class: none, brakes: other, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, hydraulics, low noise, onboard computer, traction control, TICAB Bitumen Emulsion Sprayer ABS-8000 | 8000 L Asphalt Spraying Machine Upgrade your road maintenance and asphalt repair with the TICAB ABS-8000 Bitumen Emulsion Sprayer. With an 8000-liter tank, this high-capacity machine is perfect for large-scale asphalt paving, road construction, pothole repair, crack sealing, and surface dressing. • Capacity: 8000 L • High-precision spray system for uniform application Rsdpfxsx Uql Hs Ahzobt • Handles bitumen emulsion, asphalt emulsion, tack coat, primer, and bonding layers • Ideal for municipal roads, highways, parking lots, industrial areas, and airport runways • Robust, mobile, and easy to operate • Designed for contractors, road repair companies, and paving professionals Keywords: bitumen emulsion sprayer, asphalt sprayer 8000 L, large capacity bitumen sprayer, tack coat sprayer, asphalt repair equipment, road maintenance machinery, pothole repair machine, asphalt paving equipment, surface dressing machine, TICAB ABS-8000 📩 Contact for price, delivery, and technical details. Ready for immediate use!

Condition: new, functionality: fully functional, power: 3.6 kW (4.89 HP), fuel type: gasoline, color: green, empty load weight: 713 kg, Year of construction: 2026, The TICAB BS-2000 Bitumen Emulsion Sprayer is a professional, high-capacity asphalt spraying machine for road construction, road maintenance, pothole repair, crack sealing, surface dressing, asphalt bonding, and tack coat application. With 2000 liters tank capacity, it delivers uniform and precise bitumen or asphalt emulsion application, making it ideal for contractors, municipalities, paving companies, and industrial projects. Key Features: • Tank Capacity: 2000 L • High-precision spraying system for even asphalt and bitumen coverage • Mobile, trailer-mounted, and easy to operate • Suitable for bitumen emulsion • Durable construction for long-term reliability and heavy-duty use • Ideal for municipal roads, highways, streets, parking lots, driveways, industrial areas, and airport surfaces • Manufactured by TICAB – trusted European asphalt and road maintenance equipment brand Applications: • Road construction and asphalt repair • Pothole patching and crack sealing • Asphalt bonding layer before paving • Surface dressing and resurfacing • Municipal roads, highways, parking areas, driveways, and industrial surfaces Why Choose TICAB BS-2000: Rbedpfx Ahex Uqbzszjt The TICAB BS-2000 combines professional performance, precision, and efficiency, making it the perfect choice for contractors and municipalities seeking reliable bitumen and asphalt spraying machinery for large-scale and medium-scale road repair, paving, and maintenance projects. Contact now for price, delivery, and technical specifications. Available for immediate dispatch!

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration Rodpoia Ta Ujfx Ahzsbt - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth Rjdpfsia Tauex Ahzsbt dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation Rbsdpfx Ahoia Taxezet - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, lighting, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 1600(w)x1900(h) Overall dimension(mm): 1700(w)x2350(h)x1910(d) Technical data: Rbedeia Taispfx Ahzet - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Lighting: 1pc 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: used, mileage: 606,000 km, power: 353 kW (479.95 HP), first registration: 02/2009, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2009, Equipment: ABS, electric window regulation, power assisted steering, retarder, = Additional options and accessories = - Immobilizer - SAF Axis - Speed limiter - Sper = Remarks = MAN TGS 26.480, 2009, 605000 km, 6x4, Leaf-feathered, Manual, Retarder, R. Kolberg bitumen construction, Hatz diesel engine, R. Kolberg trailer, 1997, SAF axles, Leaf-feathered, HATZ diesel engine = More information = Rodpow Ahpfefx Ahzsbt Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Make of bodywork: R. Kolberg Gmbh = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1 Rsdpew Idbyjfx Ahzebt

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters Rbsdpfsx Tuu Nsx Ahzst No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU Rbedpfx Ahjx Tiz Dozot ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 4,350 mm, total length: 8,000 mm, total width: 6,400 mm, volume flow: 35,000 m³/h, type of input current: three-phase, overall weight: 3,800 kg, working width: 3,500 mm, warranty duration: 12 months, workpiece weight (max.): 4,200 kg, inner dimension height: 3,500 mm, inner dimension length: 7,900 mm, load capacity: 4,200 kg, inner dimension width: 4,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 32 m², power: 22 kW (29.91 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 350 – Professional Spray Booth for Vans & Buses Large Format. High Airflow. Built for Commercial Vehicles. ⚡ Professional full downdraft spray booth for vans & buses ⚡ Designed for body shops specializing in commercial vehicles ⚡ Large working volume, stable airflow and optimized operating costs ⚡ Designed and delivered in full compliance with EU regulations 🔑 Key Advantages for Vans & Buses ✔ Large internal dimensions optimized for vans & buses ✔ Full downdraft airflow – consistent paint quality on large panels and roofs ✔ High-capacity DDF fans with VFD control ✔ Increased airflow for high cabins and long vehicle bodies ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive, multi-shift professional use 🌬️ Airflow Concept – Full Downdraft for Vans & Buses The Ventis Nexus 350 operates in a full downdraft configuration, specifically optimized for vans & buses. uniform airflow on roofs, sides and rear sections Rbedpfsx Tiwrjx Ahzet reduced dust contamination on large surfaces consistent, repeatable paint finish on vans & buses 🔧 Fans & Airflow Control – DDF + VFD Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Total installed fan power: 22 kW Airflow capacity: approx. 35,000 m³/h Benefits: stable airflow even with tall vehicles precise airflow regulation in painting and drying modes lower energy consumption compared to fixed-speed systems no belts or pulleys = reduced maintenance and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding commercial vehicle workshops 🔥 Heating System Integrated high-capacity heating system featuring a Riello RG5S burner (290 kW), providing: uniform warm air distribution throughout the entire booth stable curing conditions for large vehicle surfaces fast temperature build-up and reduced drying times, even with high air volumes 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application on vans & buses ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed steel front doors – wide access for vans & buses Side technical service doors for maintenance and inspection Integrated LED lighting for bright, uniform illumination of large vehicles 📐 Dimensions & Technical Data Internal dimensions: approx. 8,000 × 5,000 × 3,500 mm Airflow capacity: approx. 35,000 m³/h Total fan power: 22 kW Heating capacity: Riello RG5S – 290 kW ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or paint mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty: 12 months ✔ EU-based technical support and service

Condition: used, Used paint mist extractor with 2 side baffles with 2 fans otherwise as shown in pictures Rbsdswka Naopfx Ahzet Availability: Short term Storage location: Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,550 mm, total length: 2,430 mm, total width: 2,330 mm, volume flow: 1,000 m³/h, type of input current: AC, overall weight: 1,200 kg, warranty duration: 12 months, power: 1 kW (1.36 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Paint Mixing Lab – Professional Paint Mixing Room Clean Air | Safe Handling | Workshop Integration ⚡ Professional paint mixing room designed for body shops and industrial coating facilities ⚡ Controlled ventilation for safe paint handling and mixing ⚡ Compact footprint – ideal for integration with spray booths and prep stations ⚡ CE-compliant solution for professional workshop environments 🔑 Key Advantages Rjdpfx Aex Thbvehzjbt ✔ Controlled airflow for safe paint mixing ✔ Effective removal of vapours and airborne contaminants ✔ Improved working safety and paint quality ✔ Compact, modular construction ✔ Designed for daily professional use 📐 Dimensions & Electrical Data External dimensions: 2330 × 2430 × 2550 mm Power supply: 220 / 380 V Installed power: approx. 0.5 kW 🌬️ Ventilation & Filtration The Ventis Paint Mixing Lab is equipped with a dedicated ventilation system designed specifically for paint mixing operations. Axial ventilation fan: 370 W High-efficiency filtration system Continuous extraction of vapours and airborne particles This ensures: clean air in the working zone reduced exposure to harmful substances compliance with professional workshop safety requirements 🧱 Construction EPS insulated wall panels, powder-coated steel finish Durable construction suitable for workshop environments Easy-to-clean interior surfaces 🚪 Access Working door width: 1800 mm Comfortable access for operators and materials 💡 Lighting Integrated LED lighting (16 W) Clear, uniform illumination for safe and precise work 🖥️ Application ✔ Paint mixing ✔ Material preparation ✔ Storage and handling of paints and coatings Designed as a dedicated mixing room, reducing contamination and improving workflow efficiency between preparation and painting areas. 🛡️ Certification & Warranty ✔ CE certified ✔ Manufacturer warranty 🚚 Delivery & Installation ✔ Delivered as a complete system ✔ Professional installation and commissioning available ✔ Integration support with existing spray booths and prep stations 📩 Contact us for availability, configuration options and a tailored offer. The Ventis Paint Mixing Lab is an essential element for workshops aiming to increase safety, cleanliness and efficiency in their coating process.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, volume flow: 12,500 m³/h, type of input current: three-phase, overall weight: 1,800 kg, working width: 4,000 mm, warranty duration: 12 months, inner dimension height: 3,000 mm, inner dimension length: 7,000 mm, filter area: 25 m², power: 10 kW (13.60 HP), Equipment: documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Prep-Station – Professional Preparation Workstation Clean Airflow | Efficient Preparation | Workshop Integration ⚡ Professional prep station for sanding, masking and surface preparation ⚡ Designed for daily use in body shops and refinishing centers ⚡ Optimized airflow for dust extraction and clean working conditions ⚡ Modular design – easy integration with spray booths and workshops ⚡ EU-compliant solution for professional environments 🔑 Key Advantages ✔ Clean and controlled airflow in the preparation zone ✔ Effective dust and particle extraction ✔ Improved working conditions and surface quality before painting ✔ Reduced contamination transferred to the spray booth ✔ Compact, modular design ✔ Designed for intensive daily workshop use 🌬️ Airflow & Ventilation Concept The Ventis Prep-Station is designed to provide stable, directional airflow in the working area, efficiently removing sanding dust and airborne particles. Optimized airflow across the work zone Efficient extraction of dust and preparation residues Cleaner environment for operators and surrounding areas The system supports: improved surface quality before painting reduced rework and contamination inside the spray booth 🧱 Construction & Design Robust steel structure suitable for workshop environments Modular configuration – single or multi-bay layouts possible Designed for flexible installation and future expansion 🧼 Filtration System Multi-stage filtration system for effective dust capture: Primary filters for coarse particles Fine filtration for airborne dust Easy access for maintenance and filter replacement Ensures clean exhaust air and compliance with workshop standards. 💡 Lighting Integrated LED lighting Bright, uniform, shadow-free illumination Improved visibility during sanding and preparation work 🖥️ Control System Simple and reliable control panel Control of ventilation and lighting Designed for everyday workshop operation 📐 Configuration & Options Single or multi-bay prep stations Integration with spray booths and mixing rooms Custom dimensions and layout on request Optional enclosure panels and airflow configurations Rbodpfx Ahox Tg Syezet 🚚 Delivery & Installation ✔ Professional installation and commissioning available ✔ Integration support with existing workshop layouts ✔ EU-compliant documentation 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge Rodjx Tg Nfjpfx Ahzjbt 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.