Used Air Receiver for sale (29,156)

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9665, Equipment: freezer, Airproducts Cryo Trim S3 (800) (year 1992/refurbished 2018); serial no. 9665 - cleaning of frozen parts by blasting with plastic granulate (greater than 2 mm³ – CG 45 granulate or larger) Hsdpfsx A Sitjx Agtsnt - machine dimensions: height approx. 3.4 m, length (open or closed—does not change due to conveyor belt) approx. 4.1 m, machine width = conveyor belt approx. 2.8 m

Condition: excellent (used), Year of construction: 2016, S016277 PROD. ALUP TYPE ALLEGRO26 CE S/N CAI907698 YEAR 2016 POWER (kW) 26 Hnjdoz A Tk Aepfx Agtet CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) INVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air CONNECTION 1" NEW/USED used DOCUMENTATION no

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Hsdpfjychbasx Agtont Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 3,859 h, power: 51 kW (69.34 HP), motor manufacturer: VM, gearing type: hydrostat, fuel type: diesel, first registration: 04/2010, color: red, Equipment: air conditioning, front power take-off, lighting, Tractor: + Reform-Werke + Metrac H7 X + First registered: 04/26/2010 + 3,859 operating hours + Front three-point linkage + Front and rear PTO + Front and rear hydraulics + Hydrostatic transmission Hnedpfx Agsztq D Detet + Joystick control + 4-cylinder VM diesel engine, 70 hp, 2970 cc + Switchable all-wheel drive + Locking differentials + Air conditioning + Steerable rear wheels + Hectare meter counter + Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain Hsdey Ifmrjpfx Agtent

Condition: used, mileage: 110,100 km, power: 66 kW (89.73 HP), color: white, gearing type: mechanical, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we ask that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: BA2 Brake assist system, BB0 Braking system with ABS and ASR, BB3 Electronic Stability Program (ESP), CL3 Leather steering wheel, CM1 Side rubbing strips, E07 Hill start assist, E33 Battery management, EK2 Radio, F61 Interior mirror, F68 Heated and electrically adjustable exterior mirrors, F88 Flat blade windshield wipers, FE6 Front electric windows, driver's side with comfort control, FF5 Storage compartment above the windshield, FG1 Armrest with storage compartment, FQ3 Glove compartment, passenger side, closed, FZ1 Central locking with remote control, GK5 5-speed manual transmission, H00 Warm air duct to the passenger compartment, H06 Air conditioning system, H15 Seat heating for passenger, H16 Seat heating for driver, H22 Heated rear window, HF2 Pollen filter, I5H Front seat belts with height adjustment, I5K Folding grille for rear seat bench, I5L Seat cover type "fabric", I5Y With front seat heating, I6C Instrument cluster language: German, I6I With seat belt for center seat in the rear, I7H With B-pillar trim, I7J Standard map data, I7L Fuel tank cap lockable, I7P Tinted glass, IN8 Wheelbase 3081 mm, J10 Speedometer km/h, J44 Rear view assist, J47 Trip computer, J58 Seat belt warning system for driver's seat, J65 Outside temperature display, JA5 Light and rain sensor, JI6 Start-up mileage maintenance interval 40,000 km, KA1 Particulate filter, L04 Daytime running lights, automatic, L44 Side turn signal lights at the front, L67 Luggage compartment lighting, MB6 Emission class Euro 6b M/N1 GR. II, MG9 Generator management, MJ7 ECO Start-Stop function, MO2 Engine OM 607 DE 15 LA 66 kW (90 hp), MS1 Cruise control, MZ0 BlueEFFICIENCY, R87 Spare wheel, S34 Headrests for passenger compartment seats, SA5 Driver airbag, SA6 Passenger airbag, SD0 Child seat fastening ISOFIX, SL1 Passenger seat, SL3 Driver seat, height adjustable, T16 Sliding door right, T19 Sliding door left, U76 Rear seat bench FOLD & LOAD with load securing grille, V23 Interior trim, high-quality version, V29 Plastic floor in luggage compartment / cargo area, VC9 Tie-down points on side wall, VH5 Fabric Lima black, W16 Front window left, fixed in side wall/sliding door, W17 Window front right, fixed in side wall/sliding door, W27 Window fixed rear left, W28 Window fixed rear right, W50 Rear door, two-wing 180 degrees without window, W78 Window in tailgate with wiper and washer system We will gladly provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewings only by prior arrangement! All information without guarantee, errors and prior sale reserved! Images are for illustrative purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! Hjdpfxjzz E H No Agtjnt ESP, Particulate filter, New MOT, Partition wall = More information = Engine displacement: 1,461 cc GVWR: 2,200 kg Please contact Tobias Ebert for further information.

Condition: used, mileage: 29,600 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electric windows, left side Hnedpezg Aa Djfx Agtst - Electric windows, right side - Driver airbag - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: BA3 Active Brake Assist, BH1 HOLD function, CA1 AGILITY CONTROL chassis, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and trim in vehicle color, CU4 Aerodynamic package, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation system, E1T Touchpad, E34 Buffer battery for starting, E57 Electrical system for trailer socket, E6M MBUX multimedia system Mid, E70 Switch position lower control panel, E7B Navigation system pre-installation, ED4 Non-woven battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk/cargo area, ET4 Active Distance Assist DISTRONIC, EW6 Pre-installation for Remote Services Plus, EX8 Navigation Plus, EX9 3 years of free map data updates, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, EZ6 Parking package with 360° camera, EZ8 PARKTRONIC, F447 MODEL SERIES 447, F65 Exterior mirrors, automatically folding, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated with integrated indicator, F72 Exterior and interior mirrors, automatically dimming, FC1 Electronic key in chrome look, FF1 Center console with storage compartment, FH0 Decorative elements in piano lacquer look, black, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ0 Auxiliary heater, electric, HZ7 Climate control system, semi-automatic, TEMPMATIC in the rear, IL5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning system for passenger seat, JA1 Warning light for windshield washer fluid level, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JP1 PRE-SAFE, JP2 Assistance package, JS1 360° camera, JW5 Lane Keeping Assist, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Protection against misfueling, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, LA2 Headlamp Assist, LB9 Door exit lights, LC3 Lighting in grab handle, rear, LC4 Comfort roof control unit, LC5 Ambient lighting in exterior mirrors, LC7 Lighting for front footwell, LC8 Ambient lighting, tailgate, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle capable of using HVO, MG9 Generator management, MJ2 ECO display, MJ8 ECO Start-Stop function, MO6 Emission class Euro 6d M/N1 GR. II, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, MX0 BlueEFFICIENCY package, RL8 Light alloy wheels 7 J x 17, RY2 Tire pressure monitoring system on front and rear axles, wireless, S00 Airbag control unit generation AB12, S09 Passenger seat, standard, S37 Armrests on the outside for individual seats, 2nd row of seats, SA6 Airbag, passenger, SB1 Comfort driver's seat, SH1 Thorax-pelvis sidebag, driver, SH2 Thorax-pelvis sidebag, passenger, SH9 Windowbags for driver and passenger, T14 Active door locking mechanism, sliding door, T70 Childproof lock on doors in

Condition: excellent (used), mileage: 458,371 km, power: 200 kW (271.92 HP), first registration: 05/2009, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, Year of construction: 2009, Equipment: ABS, air conditioning, electric window regulation, power mirror, = Additional options and accessories = - Air suspension - Leaf spring - Radio/Cassette player - Radio/CD player - Speed limiter - Sun visor = Remarks = XLRAE55GF0L353236 = More information = Technical condition: very good Visual appearance: very good Registration number: 1WPM717 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Hnsdpjymricjfx Agtjt No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2009, Technical details: Hnedpfozxz Evex Agtot x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm control: Heidenhain iTNC 530 table-size: 1050 x 600 mm table load: 500 kg spindle taper: SK 40 turning speeds: 10000 1/min power capacity at 100 % load: 9 kW rapid travel x/y/z: 24 m/min feed: 24 m/min Tool changer: 40 SK 40 dimensions of the machine ca.: 4,3 x 2,6 x 2,25 m weight of the machine ca.: 8,8 t POS mill 1100 vertical machining center in very good condition from 2009 Options: - parts measuring M&H receiver without probe - external hand wheel Heidenhain HR 410 - Air supply through spindle - air gun - paperfilter system with coolant through spindle 40 bar - *

Condition: excellent (used), mileage: 737,326 km, power: 300 kW (407.89 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fridge, spoiler, = Additional options and accessories = - Enhanced engine brake - Remote central locking - Roof Spoiler = Remarks = XLRTEM4100G258059 = More information = Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Suspension: air suspension Hnsdpeymqvnjfx Agtet Weights Empty weight: 7.137 kg Carrying capacity: 12.363 kg GVW: 19.500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: 28-BNK-5 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 700 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 700 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 700 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Hodpfx Aerh E Erogtjnt Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 690 l/min Output at 6 bar 650 l/min Output at 8 bar 650 l/min Output at 10 bar 630 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 370 kg

Condition: ready for operation (used), A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement. Hodpfjzmym Uex Agtsnt

Condition: good (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Manufacturer: Ecoair, control cabinet test field on mobile base -Type: 10 outlets -Switching capacity: Outputs 1-5 max. 11 kVA / Outputs 6-10 max. 7 kVA Hjdpfx Agszrufvjtont -Features: see photos -Dimensions: 2075/1000/H2150 mm -Weight: 373 kg

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), first registration: 12/2002, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. General information about the MB Vario 814D: The auxiliary heating works very efficiently: Hedpfx Agsyxuv Detjnt This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Condition: excellent (used), axle configuration: 2 axles, first registration: 12/2002, loading space length: 7,000 mm, loading space width: 1,250 mm, loading space height: 2,300 mm, total length: 8,550 mm, total width: 2,500 mm, total height: 3,250 mm, suspension: air, color: other, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - Stairs = Remarks = 16212 = More information = Suspension: air suspension Rear axle 1: Tyre profile left: 45%; Tyre profile right: 45% Rear axle 2: Tyre profile left: 40%; Tyre profile right: 40% Tipper: Back Technical condition: very good Visual appearance: very good Hsdpfx Aeymqg Tsgtjnt = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: Hodpfjyvgiajx Agtent For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 2,500 mm, wire diameter (max.): 7 mm, mesh size: 6,000 mm, AUTOMATIC BUNDLING AND STACKING SYSTEM FOR WELDED WIRE MESH Industrial unit consisting of a Schlatter/Jäger SAB-2 bundling machine + a Schlatter SPH stacking machine, designed to automate the output of a welded wire mesh production line. The system performs the final operations of the line: receiving and transporting the mesh via roller tables, forming and bundling packages, stacking, and preparing them for subsequent removal, storage, or shipment. The unit does not need to operate in conjunction with a Schlatter welding machine. It can be integrated and connected to welded wire mesh production lines from any manufacturer, with the corresponding mechanical, electrical, and control adaptations required for the installation. Hedszych Iepfx Agtont This allows the unit to be used as: Automation of a currently manual line output. Replacement of an old bundling/stacking system. Expansion of an existing line. Independent end-of-line system for Schlatter machines or machines from other manufacturers. Main technical data SCHLATTER / JÄGER SAB-2 BUNDLING MACHINE Year: 2005 Model: SAB-2 Maximum mesh width: 2,500 mm Wire diameter: 5–7 mm Wire strength: max. 450–600 N/mm² Longitudinal/transverse spacing: ≥ 80 mm Maximum stacking/package height: 800 mm Roller track height: 250 mm Approximate power: 4 kW Power supply: 400 V / 50 Hz Compressed air: 6 bar Control: Siemens S7 PLC SCHLATTER SPH STACKING MACHINE Year: 2005 Model: SPH Maximum mesh width: 2,500 mm Mesh length: 4,000–6,000 mm Stacking system with 4 lifting stations Approximate lifting height: 700 mm Maximum capacity: 12 tons Stacking accuracy: ±10 mm Approximate power: 4 kW Control: Siemens S7 PLC Roller tables included

Condition: used, mileage: 21,500 km, power: 100 kW (135.96 HP), color: white, gearing type: automatic, number of seats: 8, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice, we ask that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: CF7 Comfort suspension, CL1 Steering wheel adjustable in inclination and height, CL4 Multifunction steering wheel with trip computer, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E34 Buffer battery for starting, E57 Electrical system for trailer socket, EA4 Audio 40, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, EL8 2-way speakers in the front, F61 Interior mirror, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FR1 Rear camera not foldable, FR8 Reversing camera, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IN3 Wheelbase 3430 mm, long overhang, J55 Seatbelt warning system for front passenger seat, JA1 Warning light for windshield washer fluid level, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel matrix display, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB6 Main tank 57 liters, LA2 Headlamp assistant, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limitation 210 km/h, MO6 Emission class Euro 6d M/N1 GR. II, MS1 SPEED CONTROL, MU2 OM 654 DE 20 LA 100 kW (136 hp) 3800/min, MX0 BlueEFFICIENCY package, RR6 Spare wheel with jack, S04 Front passenger seat adjustable, SA6 Airbag front passenger, SB1 Comfort driver's seat, SE5 Lumbar support driver's seat, SH1 Thorax-pelvis side airbag driver, SH2 Thorax-pelvis side airbag front passenger, SH9 Window bags for driver and front passenger, T14 Active locking mechanism for sliding door, T70 Child lock on doors in the passenger compartment, T74 Grab handle for entry, T75 Grab handles for entry for driver and front passenger, U63 Seating in the passenger compartment, 3-seater bench, 2nd row, U71 3-seater bench, 1st row with folding outer seat, UR3 Seat arrangement in the rear with quick-release fastening, 2 seat rows, V23 Interior trim, high-quality version, V36 Roof lining, V41 Plastic floor TPO in the passenger compartment, VF4 Fabric Caluma black, VH1 Grab handle in the rear, VV9 Attachment points in the roof frame, W16 Window in front left, fixed in side wall/sliding door, W17 Window in front right, fixed in side wall/sliding door, W29 Window fixed in the rear, W54 Rear doors, double-leaf, opening to side wall, W78 Window in tailgate with windshield wiper and washer system, XM4 Acoustic package We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. Mr. Kiel will be happy to assist you. Hnjdpfoy Uqydox Agtot IMPORTANT: Viewing only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! ESP, Navigation system, ...

Condition: good (used), Year of construction: 2016, operating hours: 6,580 h, mileage: 61,850 km, Equipment: air conditioning, Very well-maintained "Schmidt" Swingo 200+ sweeper from first owner! (V223) We are pleased to offer you this excellently equipped sweeper from the world-renowned brand "Schmidt," model Swingo 200+, previously owned by the City of Kropp. The sweeper was purchased in 08 / 2016 and is in thoroughly well-maintained condition – it is virtually rust-free and both visually and technically in good shape. Features include a three-brush sweeping system, all-wheel steering, air conditioning, cameras for reverse operation and suction mouth, as well as a nozzle irrigation system. The tires have been renewed. A service including an oil change and new coolant for the air conditioning was completed in 09/2024. The entire system is in good visual and technical condition, with no significant damage – everything functions as intended. Normal signs of use such as scratches, paint chips, and abrasions are naturally present but do not restrict usability in any way – see pictures. The vehicle has a total mileage of approximately 35,250 km and 4,630 operating hours. The sweeping distance is 6,100 km or 3,780 sweeping hours. The engine has a total of about 6,580 engine hours. Shipping is carried out within three working days after receipt of payment, insured by freight forwarder. Of course, you may also collect the machine during our regular business hours. The total weight of the system, including accessories, is 3,500 kg. The sale is intended exclusively for commercial customers. You will, of course, receive an invoice, although VAT cannot be separately stated, as this is a public sector sale. Private buyers may purchase the machine “on behalf of the customer”; a direct commercial sale to private individuals is expressly not carried out! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages from grossly negligent or intentional breach of duty by the seller, nor for injury to life, body, or health. For any questions about pricing or technical details, please feel free to contact us at the address provided. Hnsdstz Dhxepfx Agtjt

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Hsdpfoxcx Amox Agtent

Condition: ready for operation (used), Year of construction: 2012, Wiemers AT 12 II Air Tapping Pneumatic Tapping Arm Thread Cutter Year of manufacture: 2012 Operating pressure: 6 – 7 bar Air consumption: approx. 750 l/min Thread size: M3 – M12 Description has been adopted as provided. Hnodpfxoymkrvj Agtot You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop to see our full range of offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Hjdozaum Djpfx Agtjnt Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: good (used), Year of construction: 1999, Compressed Air Receiver Boge Hnjdoywg Tlopfx Agtst Type: FB44269 1000 liters Year of manufacture: 1999

Year of construction: 2018, condition: excellent (used), - volume flow: up to 1200 m³/h Hjdpfxsg Ipn Ts Agtjnt - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A - protection class: IP54 - noise: 70 dB

Condition: used, mileage: 315,000 km, first registration: 12/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,590 mm, color: white, emission class: euro6, IVECO Eurocargo 190-280 /P – Wheelbase 4590 – flatbed: - First registration: 12/2016; - 280 HP engine – Euro 6; - Approx. 315,000 km; - Wheelbase: 4.590 m; - Automatic gearbox; - Rear air suspension; - Low-profile tyres 315/70 R22.5; - GVW: 18,000 kg; - Payload: approx. 10,500 kg. Accessories: - Differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, air-suspended driver’s seat, sun visor, fog lights, central locking, radio, battery disconnect switch. Hnodpfx Asylzbrjgtjt Body/Equipment: - Flatbed, dimensions approx. 6.63 x 2.49 m - 2,000 kg retractable tail lift - Possibility to equip with hydraulic crane on request. The vehicle is available for inspection and test drive at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Ind. Area) 37067 Valeggio sul Mincio (Verona) Tel. 045-7950955 Please contact us to schedule an appointment so we can arrange site access accordingly. For further information, technical details, and to receive the sale price of the vehicle, please contact our sales team directly at 045-7950955. Please note: The vehicle description is for information purposes only and may contain errors or inaccuracies. Interested parties are advised to personally verify all specifications before purchase. Psl Autocarri Srl declines any liability for mistakes or discrepancies in this vehicle listing. NOTE: WE WILL ONLY RESPOND TO INFORMATION REQUESTS CONTAINING THE INQUIRER’S NAME AND TELEPHONE NUMBER.