Used Af 222 for sale (35,335)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Cedpfx Absxzfg Ns Tjrk Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Cedpfxjx Dbtwe Ab Tjrk Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Crjdpfx Aeu Umbyjb Tsk Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: good (used), mileage: 469,929 km, power: 320 kW (435.08 HP), first registration: 11/2014, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,050 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,550 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, traction control, = Additional Options and Equipment = - Digital tachograph - Electric mirrors - Tachograph (control device) - Fixed coupling - Power take-off (PTO) - Space Cab = Comments = Number of axles: 3, Configuration: 6x2, Payload: 15,414 kg, Curb weight: 8,486 kg, Gross weight: 23,900 kg, Total tank capacity: 680 liters, Fifth wheel height: 115 cm, Fifth wheel type: fixed, Number of locks: 1, Suspension type: air suspension, Cab type: Space Cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: multicolor, Heated mirrors, Lighting type: halogen lamp, Warning lights, Engine power: 320 kW (429 hp), Fuel: diesel, Euro 6, Transmission type: manual gearbox, Gearbox brand: ZF, Gears: 16, Clutch pedal, Retarder brand: Constant Throttle Brake, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, Central locking, Seats: 2, Seating arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual = Further Information = Transmission Gearbox: ZF, 16 gears, manual transmission Axle configuration Brakes: disc brakes Axle 1: Tire size: 315/70R22.5; steered; Tire tread left: 5 mm; Tire tread right: 8 mm; Suspension: leaf suspension Axle 2: Tire size: 235/75R17.5; lift axle; Tire tread left: 2 mm; Tire tread right: 1 mm; Suspension: air suspension Axle 3: Tire size: 315/70R22.5; twin tires; Inner left tread: 6 mm; Outer left tread: 4 mm; Inner right tread: 5 mm; Outer right tread: 6 mm; Suspension: air suspension Weights Unladen weight: 8,486 kg Payload: 15,414 kg gross vehicle weight (GVW): 23,900 kg Interior Number of seats: 2 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: 56-BFJ-1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, various years of manufacture and price categories. Why should you buy at Kleyn Trucks? Simple! • Large and fast-moving inventory • Recognizable quality • Good price • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The assurance of “recognizable quality” • And much more…. Crsdpjx Dq Tgofx Ab Tek Visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rates and send a request via our website. Ask directly about our European warranty package.

Year of construction: 2010, condition: good (used), Industrial PC cabinet Make KAISER+KRAFT PC-900 Dimensions: L 900 mm W 700 H750 mm. weight ca.100 Kg. Codpemqiz Refx Ab Terk

Condition: ready for operation (used), power: 54 kW (73.42 HP), fuel type: diesel, empty load weight: 4,680 kg, Year of construction: 2005, operating hours: 4,885 h, Vehicle Description Mini excavator SCHAEFF HR18 Year: 2005 According to hour meter: 4,885 hours 4,680 KG 54.6 kW - Quick coupler - Hydraulic grading bucket - 2 digging buckets - All hydraulic lines - Cab with heating - Work lights - Immediately ready for operation - Good tracks Sales price: 19,500 EUR net Cjdpfjx Dmz Hsx Ab Tork Affordable delivery also available!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit. Cjdpfx Absxzd R Ts Tork

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Credpfjwq Dwzsx Ab Tsk Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Year of construction: 2012, 7 pcs Colli flow racks Manufacturer: SSI SCHÄFER Type: KDR Year: 2012 with hooks and screws. Span width: 1280 mm Max load per bay: 1600 KG Codswqx N Sjpfx Ab Tork External dimensions and weight per rack Width: 1400 mm Depth: 1300 mm Height: 2200 mm Weight: 200 KG. Price per piece: €400 Price for all 7 pieces: €2500

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Crodpfx Abjxzd Nvj Tjk Note: Machine is sold without material hopper.

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Cjdpfouz T Ipex Ab Tsrk Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: used, 8 units. Heavy-duty trailer package sale Credpfx Absxzrxxs Tok Manufacturer: MAFI, Year of manufacture: 1980–1990 Loading area: 2700 mm x 1300 mm x height 480 mm On 2 units, the steering systems are missing, and the tires need to be replaced.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Cedjxzd Ixopfx Ab Tork Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Crsdpfxjxx Hyrj Ab Tek Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: ready for operation (used), Year of construction: 1990, 2 units heavy-duty trailers, manufacturer MAFI, year 1990. Load capacity: 2000 kg. Loading area: 3300 mm x 1200 mm, height 500 mm. Overall length with steering: 5200 mm. Crodpexzrwhjfx Ab Tek

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Codpou Ul Tzsfx Ab Tsrk Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: good (used), Year of construction: 2010, Marble measuring plate Fabr.Fischer Type : MP 5100 Bj.ca.2010 In good condition. Dimensions : Length 5100 mm Width 1600 mm Height: 500 mm Weight.ca. 10 t. Crsdpfx Asnccycob Tek

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Crjdju Ul Tuepfx Ab Tek Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer Crodpfxewxtb Ee Ab Tok – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: Cjdpexx Hyxsfx Ab Tsrk max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.

Condition: good (used), Automatic Folding Machine Multigraf Touchline TF-375 Device in perfect condition, fully functional. Purchased from a small digital printing house. Year of production 2019. This is the most efficient folding system on the market, solid construction. Production Switzerland. Possibility of connecting to any creasing machine or other device, in-line and off-line operation. Control from a touch, color monitor. Technical data: Max sheet size: 375 x 660 mm Min sheet size: 105 x 148 mm Codjvkt T Tepfx Ab Tork Max speed: 6000 sheets/h Material weights: 100-400 GSM Power supply: 230 V Weight: 180 kg Dimensions of the device: 1.86 x 0.6 x 1.3 m

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Cjdpfxowud Tds Ab Tork Produced by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Cjdpfswud Tksx Ab Tsrk Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment Cedpfxexmvaws Ab Tsrk • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Credpfx Aoumuxxeb Tjk Possibility of testing in the showroom in Radom.