Used Adam for sale (366)

Condition: like new (used), Binder VDL 53 Vacuum Dryer Unused, complete with vacuum pump included BINDER VDL 53 – Safe Vacuum Dryer for Flammable Solvents The safe BINDER vacuum dryer from the VDL series ensures maximum safety when drying organic solvents, and is supplied as standard with TÜV/GS certification. The interior chamber of the VDL dryer is designed in accordance with ATEX guidelines for Zone II 3G. Features: • Chamber interior designed in accordance with ATEX guidelines for Zone II 3G • Electronically controlled APT.line™ preheating chamber with 2 extension shelves, providing high temperature accuracy and repeatable results • Temperature range: from 15°C above ambient temperature up to 200°C • MP controller: 2 programs with 10 segments each or switchable to 1 program with 20 segments • Integrated weekly timer with real-time clock function • Digital temperature setting with 1°C accuracy Csdpfx Aox A Eigob Tork • Hour counter • Spring-mounted safety glass panel with splash protection • Precisely adjustable ventilation valve • Precisely adjustable inert gas valve with Cross-Flow technology • Safety features: • Pressure control device – heater activates below < 125 mbar • Hermetically sealed control panel with compressed air connection and service unit • Fire protection gasket • Analog manometer (shows the pressure difference between the inner chamber and ambient pressure) • Electropolished stainless steel interior chamber, suction and ventilation ducts, pressure container, extension shelves, and ball valve • Door gasket made of hardened silicone • Independent, adjustable class 2 (DIN 12880) temperature safety device with visual overtemperature alarm • DN 16 measurement port • RS 422 interface for use with optional APT-COM™ DataControlSystem software meeting GMP/GLP and FDA 21 CFR Part 11 requirements • 2 patented, flexible aluminum extension shelves • All electrical components isolated from the interior chamber Also available as a complete system with module and vacuum pump. Advantages of the complete set: • Reduced noise level • Convenient working height • Well-balanced system

Condition: reconditioned (used), Year of construction: 2002, Pressure 100 ton Clear width between the two uprights: 420 mm Ram dimensions: 610 x 410 mm Table dimensions: 950 x 650 mm Installation height, ram bottom position: 400 mm Cjdox Adp Eopfx Ab Tork Adjustable ram stroke: 0–140 mm Ram adjustment: 90 mm Strokes per minute: 55 Clamping pin: D 50 H7 Motor power: 7.5 kW Dimensions: H 3050 x W 1030 x D 1905 mm Weight: 7000 kg Press is equipped with: - Air clutch - Hydraulic overload protection - Central lubrication system - Bronze guide strip

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: P082WG406, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 500 mm Y-axis: 400 mm Z-axis: 330 mm Spindle speed: max. 10,000 rpm Rapid traverse (axes): max. 54 m/min Table & Loads Permissible table load: 300 kg Maximum tool weight: max. 2 kg Credpfexxvi Aox Ab Tok Maximum total tool weight: max. 23 kg Tool dimensions Overall length: 200 mm Shank length: 120 mm Tool diameter: 80 mm Maximum height: 440 mm MACHINE DETAILS Weight: 2,100 kg Mains supply: 3-phase Power rating: 11 kVA

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm Cjdpfx Abotdg Evs Tjrk CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: used, Year of construction: 2003, Depositor Make: Rademaker Model: Spot Depositor 2003 Last used in a Pie factory producing 170 pies min 4 lane Touch screen siemens control Available with a 9m long 3 tier conveyor system (details on request) Codoxzixijpfx Ab Tjrk

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Important Note: Crodpfsxgg Rmox Ab Tok This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,230 h, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,489 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, power: 34.2 kW (46.50 HP), motor manufacturer: Yanmar, gearing type: automatic, motor model: 4tNE94L, Clark GTS 30 – 3-Ton Diesel Forklift with Full Cabin and Heater | Year 2019 For sale is a well-maintained diesel forklift from the manufacturer Clark, model GTS 30. The machine is fully operational and equipped with extensive features – ideal for demanding, daily use indoors and outdoors. Technical Data & Equipment: Model: Clark GTS 30 Serial Number: GTS232D-0799-8299CNF Load capacity: 3,000 kg Year of manufacture: 2019 Mast: Triplex mast with full free lift Lift height: 4,800 mm Free lift: 1,489 mm (without load guard) Overall height: 2,180 mm Forks: 1,400 mm long Tyres: Superelastic 3rd hydraulic circuit including hose routing Sideshift (installed) Lighting system similar to road regulations (StVZO) Fully suspended driver’s seat Full cabin with heating Condition: Used, technically flawless, ready for operation. Normal signs of wear according to age. Cjdpfx Abewykrwe Terk

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale are turbochargers type M33 KTT2 A/R.72 from the manufacturer GARRETT/HONEYWELL with item number 710223-0005. The turbochargers were removed from new engines and are therefore as good as new. Codpfx Asukct Ejb Tsrk There are a total of 94 in stock. Price per piece: 350€ net VB. Sale exclusively to traders under express exclusion of warranty and liability for material defects.

Condition: like new (used), Year of construction: 2025, Device like new from 2025, ex demo Manufacturer: Binder Codpfxsxyy Hhe Ab Terk Model: KBF 115 Year of manufacture: 2025 Type: Constant climate chamber Temperature range: 0–70°C Humidity range: 10–80% Humidity control: humidity sensor + steam humidification Power: 2 kW Capacity: 115 liters Ethernet connection Internal dimensions: 60 × 35 × 45 cm External dimensions: 70 × 103 × 90 cm

Condition: ready for operation (used), machine/vehicle number: YV2V0Y1C8EB691499, mileage: 154,665 km, first registration: 04/2014, fuel type: diesel, empty load weight: 14,375 kg, maximum load weight: 11,625 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x2, color: yellow, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, hydraulics, Dear Sir or Madam, We are pleased to offer for sale a Volvo heavy-duty truck fitted with a specialist Geesink Norba refuse collection body. Vehicle specifications: Emission standard: EURO VI First registration date: 30/04/2014 Mileage: 154,665 km Transmission: Allison automatic Fuel type: diesel Suspension: steel–air Gross vehicle weight (GVW): 26,000 kg Curb weight: 14,375 kg Payload capacity: 11,625 kg Engine power: 280 HP Body: Geesink Norba Type: GPM III v 20H25 Year of manufacture: 2014 Serial number: 2140069 Vehicle dimensions: Length: 9.40 m Width: 2.50 m Height: 3.43 m Equipment: ABS, differential lock, central lubrication, central locking, additional headlights, electric windows, electric mirrors, hydraulic power steering, engine brake, hydraulic system, immobiliser, retarder, on-board computer, manual air conditioning, reversing camera, additional lights, fog lights, sun visor, speed limiter, factory radio, adjustable suspension, reversing warning system, rotating beacons, tachograph, cruise control, multifunction steering wheel, dual rear wheels. We provide: - Post-sale vehicle servicing - Maintenance and repair of equipment purchased from us - Worldwide transport On request, we offer: - Engine oil and filter change for the truck - Oil and filter change for the refuse body Additional service: Cjdpfx Ajxq A Rkjb Tjrk As a market leader in Central Europe specializing in the sale of municipal vehicles and equipment, we invite you to benefit from our extensive experience, including brokerage in the sale of your surplus municipal equipment. On your behalf, we will handle: - Customer communication in several foreign languages - Preparation of sales and post-sales documentation - Organization of road and sea transport - Customs documentation (customs clearance, Eur 1, T1) - Preparation of vehicles for sale Leasing available for older vehicles, up to 18 years old. If you wish to receive more details, please contact us.

Condition: excellent (used), Wentylatory przemysłowe z chillerow/agregatów wody lodowej: Trane, Carrier, Climaveneta, Bluebox, Clivet, Emicon, Inny. Ilość: 50 szt. Różne średnice: 80-110 cm Więcej informacji i dokładne ceny pod nr tel Podana cena jest ceną netto Kompleksowe i fachowe doradztwo pod względem doboru agregatów wody lodowej. Gwarancja (wliczona w cenę) 12 miesięcy pod warunkiem uruchomienia przez nasz serwis techniczny. Wysyłka (wyceniana indywidualnie) lub odbiór osobisty w naszym centralnym magazynie koło Lublina. Crodpfxjkzkvwj Ab Tek Jesteśmy na Polskim rynku od 2016 roku. Ze względu na skoki kursu walut i częste zmiany stanu magazynowego proszę się skontaktować w celu ostatecznej wyceny oraz dostępności urządzenia. Posiadamy więcej Agregatów Wody Lodowej nowych-OUTLET i używanych. Ponad 150 urzadzeń dostepnych w naszym magazynie. Zapraszam do zapoznania się z naszą ofertę na stronie

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 1,350 mm, spindle bore: 120 mm, turning diameter over bed slide: 1,000 mm, center height: 675 mm, turning length: 5,000 mm, Heavy-duty lathes POREBA - Lathes after general overhaul Center height mm 675 Rotation Ø over bed mm 1350 Rotation Ø over bed slide mm 1000 Rotation Ø in the offset mm 1600 Length of offset A1-15/DIN 55027 mm 220 Center distance mm 5000 Spindle bore mm 120 Taper in main spindle metric 130 Front spindle bearing mm 220 Spindle mount Standard / fixing screws M22 ISO-702/I A1-15 Option DIN 55027/15 Max. Workpiece weight - between centers: kg 9000 - with 2 steady rests: kg 15000 - overhung: kg 2000 Bed width mm 660 Turning tool cross-section (HxW) mm 32 x 40 SPEEDS mechanical 18 speed levels Main motor power: kW 45 Number of steps: 18 Speed range: rpm 10-500 rpm or 12.5-630 rpm RIDING STOCK Quill diameter mm 190 Quill stroke mm 300 Crodpfxshmuuye Ab Tjk Cross adjustment mm +/- 15 ADJUSTMENT Number of steps 70 Range of longitudinal feeds mm/rev 0.07 - 10 Range of face feeds mm/rev 0.035 - 5 Feed range of the top slide mm/rev 0.017 - 2.5 Rapid traverse lengthwise mm/min 4000 Rapid traverse flat mm/min 2000

Condition: used, functionality: fully functional, machine/vehicle number: P455D-0127-8311CNF, Year of construction: 2019, operating hours: 3,142 h, load capacity: 4,990 kg, lifting height: 4,500 mm, free lift: 1,554 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,371 mm, DGUV certified until: 06/2026, fork length: 1,600 mm, Equipment: sideshift, Powerful diesel forklift with comfort cab and extensive equipment! For sale is a reliable and robust CLARK C50S from year 2019. With a lifting capacity of nearly 5 tons, an economical Deutz engine, and a full cabin with heating, this forklift is ideal for demanding operations both indoors and outdoors. The equipment leaves nothing to be desired – ready for immediate use! Technical data: Manufacturer / model: CLARK C50S Year of manufacture: 2019 Lifting capacity: 4,990 kg at 500 mm load center Engine: Deutz TD3.6 – 55.4 kW (diesel) Mast: Triplex mast with full free lift Lift height: 4,500 mm Free lift: 1,554 mm Construction height: 2,371 mm Fork length: 1,600 mm Tyres: Super elastic (SE) Equipment: Crjdpswufqwofx Ab Tjk Control valve with appropriate hose routing Bolt-on sideshift Lighting system in StVZO-comparable design Comfortable driver's seat (fully suspended) Full cabin with heating for all-season use Condition: The forklift is in good used condition and ready for immediate operation. Ideal for heavy-duty applications.

Condition: excellent (used), Year of construction: 1996, Koppens VM400HSE Former 400mm belt width Immaculate condition inside and out Currently have a brand new Touch screen controller installed. (Video shows walk around inspection prior to screen fitting) One of the best second hand Formers to be available. Available December 2025! Cedpfoxx Si Sox Ab Tjrk

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 10082850 AHP, High-performance DTG digital printing printer: - The fastest DTG printer on the market Csdjvl Hb Topfx Ab Terk - 24/7 – High production efficiency in shift work - Integrated OPC-UA interface - Wide range of pallets – including special applications - Max. print size 200 x 98 cm - Integrated presses - 12 Kyocera KJ4B print heads (CMYK + 8xwhite) - 3 pallets 400x500mm - Linear motor movement system - Native 600 dpi solution - Automatic wiper system/closing station - Linux control server - Multi-touch monitor - New software - Separate print queue for each pallet / or one for all tables - Display for each print queue - integrated thermal press - API interface - incl. dampening system - incl. integrated ink shaker 2 pieces available, as well as a preparation device: Aeoon Pre-Treatment Spray Unit with Belt: - Size: 1000 x 3000 mm - 13 nozzles - Touch screen - Fully automatic with belt system - 1x220V N + L + PE - 0.9 kVA / 50/60 Hz Tesoma DLT-G-11-HHH-SR Drying Tunnel

Condition: used, Year of construction: 2010, color: white, machine/vehicle number: 013, Equipment: air conditioning, cooling unit, Dear Sir or Madam Thank you for your interest in refrigerated containers from MT CONTAINER GmbH in Hamburg. Refrigerated containers are used for the gentle transportation or storage of foodstuffs and other goods that require a certain temperature to be maintained to ensure their integrity. Whether against the effects of the weather or theft, your goods remain protected in any case. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm _____ This container is a: 40 foot HC refrigerated container from Thermo King (year of manufacture: 2010). _____ Our refrigerated containers have the following features: ✅ PTI-OK ✅ Valid CSC sticker (TÜV for the box) ✅ Adjustable from -30⁰C to +30⁰C ✅ Wind and waterproof Crsdpsh Hnbwefx Ab Tsk ✅ Odourless The insulation is on average 8cm - 10cm (depending on manufacturer) _____ Our refrigerated containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2294 mm x H 2554 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 67.9 m³ Euro pallets ■ 25 Further details: Unladen weight ■ 4550 kg Payload ■ 29450 kg Total weight ■ 34000 kg Goods to be transported: Temperature-controlled goods _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ PVC slat curtain on request ■ Access ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send a non-binding message by [e-mail], [telephone], [fax], [letter] to the contact details given under "Legal information".

Condition: new, Year of construction: 2026, travel distance X-axis: 280 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 280 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, nominal power (apparent): 6 kVA, torque: 57 Nm, controller manufacturer: Siemens, controller model: S828 D, workpiece length (max.): 150 mm, workpiece width (max.): 80 mm, workpiece height (max.): 180 mm, workpiece diameter (max.): 80 mm, workpiece weight (max.): 3 kg, Equipment: rotational speed infinitely variable, DANE CHARACTERISTIC table Working surface of the table 750 x 270 mm Number of T-slots in the table 3 Width of the T-slots in the table 14 mm Distance between the T-slots in the table 100 mm Maximum load of the table 100 kg Maximum travel Longitudinal axis "X" 280 mm Transverse axis "Y" 280 mm Vertical axis "Z" 400 mm Rapid traverse Longitudinal "X" 30 m/min Transverse "Y" 30 m/min Vertical "Z" 20 m/min Spindle Tool holder BT40 or SK40* Tool clamping force 8 kN Servo axis motors In longitudinal axis "X" 3.5/6 Nm In transverse axis "Y" 3.5/6 Nm In vertical axis "Z" 3.5/6 Nm Positioning accuracy of the linear axes +/- 0.005 mm Main drive motor Power S1/S6 (Siemens) 4.3/6.4 kW Maximum torque on spindle S1/S6 38/57 Nm Maximum spindle speed 8000 rpm Tool magazine Number of tools/option* 8/16* Maximum tool diameter 80 mm Maximum tool length 150 mm Maximum tool weight 3 kg Overall dimensions Length ~1360 mm Width ~2200 mm Height /maximum travel of the Z-axis/ ~2550 mm Coolant tank volume 130 l Weight ~1500 kg Standard accessories: SIEMENS CNC control system ✓ Interpolation in 3 axes ✓ Credpfxeu Sklas Ab Tjk Ball screw spindles, lubricated with solid lubricant ✓ Water-cooled tool cooling system ✓ 8-station tool magazine, swivel arm BT40 or SK40 ✓ Electric handwheel ✓ Telescopic guide covers ✓ Cabin to protect the work area ✓ Lighting system with lamp ✓ Graphic programming support - predefined processing cycles ✓ LCD display 8" (S808) - 10.4" (S828) ✓ Thread cutting without compensation holder (fixed) ✓ Air nozzles at the end of the spindle ✓ Spindle cooling system ✓ TRIM MicroSol 515 cooling lubricant concentrate ✓ Safety system to prevent opening: front doors of the machining area / doors of the control cabinet ✓ Air pressure sensor for detecting low pressure ✓ Electrical installation for mains supply 3x400V, 50Hz ✓ USB port on the front panel of the machine ✓ Standard paint color similar to RAL 5000 / machine base; RAL 7035 ✓ Machine status display ✓ Operating and programming instructions ✓ Special equipment and special design..: - Second 8-station tool magazine Swivel arm ISO40/BT40 - Spindle cooling 6-9 bar - RENISHAW TS 27R tool measuring unit - RENISHAW OMP40 workpiece measuring unit with cycles - Separate spindle cooling unit for machining colored materials and plastics - Handwheel on the bar (pilot) - Tool trolley - Precision clamping device - Automatically opening doors - Additional Ethernet output on the control cabinet for transferring programs between the computer and the machine - Siemens - SinuTrain software

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,130 h, Kubota KX61-3 Mini Excavator – Year 2013 – Approx. 2,130 Operating Hours – Very Good Condition – Incl. 3 Buckets For sale is a well-maintained Kubota KX61-3 mini excavator, year of manufacture 2013. The excavator is in very good technical and visual condition and has been serviced regularly. The machine runs smoothly, is reliable, and is immediately ready for use. Features & Details: • Model: Kubota KX61-3 • Operating hours: approx. 2,130 h • Year of manufacture: 2013 • Condition: very good, fully functional • Weight class: approx. 2.6 t (depending on configuration) • Engine: reliable Kubota diesel engine • Hydraulics: clean, no significant leaks • Comfort cab with excellent all-round visibility • Servo-controlled joystick operation • Rubber tracks in good condition • All maintenance carried out regularly Included in scope of delivery: • Grading bucket (GRL) 120 cm • Digging bucket (TL) 40 cm Crsdexx R Awjpfx Ab Tjk • Digging bucket (TI) 30 cm The excavator is ideally suited for landscaping, civil engineering, yard work, and all projects requiring a reliable and agile construction machine. Price on request / negotiable Viewing and test run possible by appointment at any time. If interested, feel free to contact us!

Condition: used, Year of construction: 2006, color: white, machine/vehicle number: 016, Equipment: air conditioning, cooling unit, Dear Sir or Madam Thank you for your interest in refrigerated containers from MT CONTAINER GmbH in Hamburg. Refrigerated containers are used for the gentle transportation or storage of foodstuffs and other goods that require a certain temperature to be maintained to ensure their integrity. Whether against the effects of the weather or theft, your goods remain protected in any case. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm _____ This container is a: 40 foot HC refrigerated container from Carrier (year of construction: 2006). _____ Our refrigerated containers have the following features: ✅ PTI-OK ✅ Valid CSC sticker (TÜV for the box) ✅ Adjustable from -30⁰C to +30⁰C ✅ Wind and waterproof ✅ Odourless The insulation is on average 8cm - 10cm (depending on manufacturer) _____ Our refrigerated containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2294 mm x H 2554 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 67.9 m³ Euro pallets ■ 25 Further details: Unladen weight ■ 4550 kg Codpfx Ajh Hnbleb Tsrk Payload ■ 29450 kg Total weight ■ 34000 kg Goods to be transported: Temperature-controlled goods _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ PVC slat curtain on request ■ Access ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function],

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 5,000 mm, turning diameter: 590 mm, spindle bore: 72 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, spindle motor power: 11 W, rapid traverse X-axis: 8 m/min, CNC lathe TUS 580 C New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Center height [mm]: 290 Swing diameter over bed [mm]: 590 Swing diameter over bed slide [mm]: 380 Center width [mm]: 1000/1500/2000/3000/4000/5000 Max. Machining length [mm]: 1250/1750/2750/3750/4750/5750 Spindle bore [mm]: 72 Spindle mount [DIN]: 55027/8 Taper in the main spindle [MK]: 8 Max. Workpiece weight: - Clamping between centers [kg]: 400 - In chuck and live center in tailstock [kg]: 600 - In chuck and steady rest [kg]: 800 - In chuck, steady rest and live center [kg]: 1300 - Flying (Lmax = 250 mm) [kg]: 150 Bed width [mm]: 400 Turning tool cross-section (HxW) [mm]: 32 x 32 Multifix system steel holder [size]: C Speeds: Total speed range [rpm]: 25 to 2000 Number of stages: 3 Gear stage I [rpm]: 25 - 100 Gear stage II [rpm]: 100 - 400 Gear stage III [rpm]: 500 - 2000 Max. Torque (spindle) [Nm]: 1200 - Gear stage I [Nm]: 1200 - Gear stage II [Nm]: 300 - Gear stage III [Nm]: 60 Travel range: Longitudinal adjustment - X axis [mm]: 290 Longitudinal adjustment - Z axis [mm]: 1000/1500/2000/3000/4000/5000 Feed range: Feed range in X/Z-axis [mm/min]: 1 - 3000 Csdpoufgg Djfx Ab Tjrk Rapid traverse speed X-axis [mm/min]: 8000 Rapid traverse speed Z-axis [mm/min]: 8000 Torque of the axis drives: X-axis [Nm]: 11 Z-axis [Nm]: 16 Feed influence [%]: 0 - 120 Tailstock: Quill diameter [mm]: 90 Quill stroke [mm]: 230 Quill taper [MK]: 5 Drives: Main motor power [kW]: 11 Cooling pump motor output [kW]: 0.09 Total output [kVA]: 15 Space requirement/weight: Length of the machine with 1000 mm center distance [mm]: 3150 Length of the machine with 1500 mm center distance [mm]: 3650 Length of the machine with 2000 mm center distance [mm]: 4150 Length of the machine with 3000 mm center distance [mm]: 4650 Length of the machine with 4000 mm center distance [mm]: 5250 Length of the machine with 5000 mm center distance [mm]: 5750 Width of the machine, depending on the equipment [mm]: 2000 Height of the machine, depending on the equipment [mm]: 2000 Machine weight at 2000 mm center distance [kg]: 3800 Additional weight for a further 1000 mm center distance [kg]: approx. 500 Standard accessories: - Electrical equipment for three-phase current 400 V / 50Hz according to VDE 0113 - Siemens SINUMERIK 828D BASIC ShopTurn - Frequency controller for main drive - SIEMENS - Illumination lamp - Quick-change steel holder head size C - Coolant system with electric pump - Locked chuck protection hood - Rear chip guard - Chip guard at the front of the top support - Operating instructions, test report - CE and declaration of conformity - Machine color (similar to RAL 7035 RAL 7011) Options: - Fixed setting vice - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drill stand with boring bar - And much more

Condition: used, Year of construction: 2013, color: white, machine/vehicle number: 018, Equipment: air conditioning, cooling unit, Dear Sir or Madam Thank you for your interest in refrigerated containers from MT CONTAINER GmbH in Hamburg. Refrigerated containers are used for the gentle transportation or storage of foodstuffs and other goods that require a certain temperature to be maintained to ensure their integrity. Whether against the effects of the weather or theft, your goods remain protected in any case. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm _____ This container is a: 40 foot HC refrigerated container from Daikin (year of construction: 2013). _____ Our refrigerated containers have the following features: ✅ PTI-OK ✅ Valid CSC sticker (TÜV for the box) ✅ Adjustable from -30⁰C to +30⁰C ✅ Wind and waterproof ✅ Odourless The insulation is on average 8cm - 10cm (depending on manufacturer) _____ Our refrigerated containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2294 mm x H 2554 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 67.9 m³ Euro pallets ■ 25 Further information: Unladen weight ■ 4550 kg Payload ■ 29450 kg Total weight ■ 34000 kg Goods to be transported: Temperature-controlled goods _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ PVC slat curtain on request ■ Access ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ Crjdpfxoh Hnbdj Ab Tek ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function],

Condition: new, Year of construction: 2026, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear, continuous chip splash guard - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Scale ring on the bed slide and tailstock handwheel Crjdeugwrgspfx Ab Tjk - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity

Condition: used, Year of construction: 2007, color: white, machine/vehicle number: 012, Equipment: air conditioning, cooling unit, Dear Sir or Madam Thank you for your interest in our advertisement We are a renowned master company at the port of Hamburg - Our specialty are reefer containers - Whether repair / sale or spare parts - with us you are at the right address In this advertisement we offer a 40' Thermo King reefer container built in 2001. The container leaves our depot : -freshly checked, with PTI - OK , (fully functional / tested by our specialized and certified company) - CSC - valid, wind-/ watertight, adjustable from -30⁰C to + 30⁰C, (ideal for chilled goods or goods that need to be kept warm) - Refrigerated container is ready for immediate use. The insulation is on average 10cm (depending on manufacturer). We offer the following special after-sales services for our customers: - expert advice free of charge - Warranty on request (for an extra charge) - Low-priced spare parts for customers - Completely painted in high-gloss white (RAL9010) on request for an additional charge The refrigerated containers are located at our depot in the port of Hamburg and can be viewed at any time. Do you have any questions or are you looking for special containers? Then please contact us, our employees are looking forward to your call / email or visit MT Container GmbH Credpsh Hnbzefx Ab Tok Reiherstiegdeich 55 Tel: 21107 Hamburg

Condition: new, Year of construction: 2026, turning diameter over cross slide: 620 mm, turning diameter: 6,000 mm, spindle bore: 103 mm, turning diameter over bed slide: 860 mm, New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Working range: - Center height [mm]: 330, 380, 430 - Rotation diameter over bed [mm]: 660, 760, 860 - Rotation diameter over cross slide [mm]: 420, 520, 620 - Center width [mm]: 1500 to 6000 - Bed width [mm]: 560 - Spindle nose DIN 55027/11 - Spindle bore [mm]: 103 - Max. Torque (spindle) [Nm]: 2000 - Speed control: Stepless - Speed stages: mechanical 3 - Total speed range [rpm]: 9 - 1320 / 12 - 1250 - Power [kW]: TUB660C: 15 / 18.5 - Feed rates X/Z [mm/min]: 1 - 3000 - Rapid traverse X/Z [mm/min]: 8000 - Quill diameter [mm]: 105 - Inner taper of quill [MK]: 6 - Quill stroke [mm]: 225 - Workpiece weights supported with tailstock [kg]: 1500 Options: - Fixed tailstock - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk Credpeufgfyefx Ab Tjk - Drill rig with boring bar - And much more

Condition: used, Year of construction: 2005, color: white, machine/vehicle number: 015, Dear Sir or Madam Thank you for your interest in refrigerated containers from MT CONTAINER GmbH in Hamburg. Refrigerated containers are used for the gentle transportation or storage of foodstuffs and other goods that require a certain temperature to be maintained to ensure their integrity. Whether against the effects of the weather or theft, your goods remain protected in any case. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm _____ This container is a: 40 foot HC refrigerated container from Carrier (year of manufacture: 2005). _____ Our refrigerated containers have the following features: ✅ PTI-OK ✅ Valid CSC sticker (TÜV for the box) ✅ Adjustable from -30⁰C to +30⁰C ✅ Wind and waterproof ✅ Odourless The insulation is on average 8cm - 10cm (depending on manufacturer) _____ Codoh Hnbpopfx Ab Tork Our refrigerated containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2294 mm x H 2554 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 67.9 m³ Euro pallets ■ 25 Further details: Unladen weight ■ 4550 kg Payload ■ 29450 kg Total weight ■ 34000 kg Goods to be transported: Temperature-controlled goods _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ PVC slat curtain on request ■ Access ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function],