Used Abort Gate for sale (607)

Condition: new, Year of construction: 2025, machine/vehicle number: 872406335, Frumecar EMA 500 concrete batching plant Year: NEW Production: 30 m3 per hour * Capacity of the aggregate hopper – 25 m3 (4 x 6.25 m3) * The bunker has 8 discharge gates with pneumatic opening system (2 per compartment) * Mixer – planetary mixer, 0.5 m3 of vibrated concrete per cycle * Skip for the elevation of the aggregates * Water pump is included * Compressor is included * Large control cabin is included (2.0 m x 2.0 m) with air conditioning * 1 cement silo, 60 tons * Erection of the plant and training of your employees are included * 1-year guarantee from startup of the plant Lodpfohd I Utox Abzjhl More machines and mixing plants can be found on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: good (used), Machine Security Fencing Dimensions approx 3000mm x 4000mm Lsdspy Ei Ujpfx Abzohl Complete with entry gates

Condition: new, Year of construction: 2026, Technical data Control system: Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map. Working area: X 600 x 900 mm Y 3000 x 12000 mm Gate clearance and Z axis range: 100-1000 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing: Trapezoidal rails, Bosch Rexroth 25 Speed: Up to 120 m / min Acceleration: Up to 1G Program resolution: up to 0.0001mm Positioning accuracy: 0.01 mm Ledpfsn Hq Huex Abzohl Gate drive: double-sided master / slave with gate angle correction Electrospindles: 2 kW to 36 kW powered by an inverter Tool taper: ISO30 lub HSK63 ER32 Maximum speed of the electro-spindle: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation integration with an industrial robot Table type: T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Lsdpfon Nv H Sox Abzshl Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: new, Year of construction: 2026, Machine for processing sinks made of materials such as sintered quartz, granite, granite composites and ceramic models, etc. Technical data: MILLING PLOTTER 1325 PRO+ WORKING AREA 1300X2500MM Z AXIS RANGE 700MM - PRO OMRON SERVO AC HIGH SPEED DRIVES (SET WITH PLANETARY GEARS) 1.5KW ETHERCAT INTELLIGENT ENERGY RECOVERY OSAI OPENSMART REAL-TIME INDUSTRIAL CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT UP TO 16 AXES, ETHERCAT COMMUNICATION WITH THE CONTROL CABINET AUTO CALIBRATION OF THE GATE ANGLE Lhsdpfxsualqqe Abzsl EUCHNER HBA-103037 HAND MANIPULATOR CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRAL LUBRICATION WITH SKF SOLID GREASE BEAM SYSTEM PNEUMATIC CLAMPS SINK FIXING SYSTEM DUST REMOVAL CHANNELS BALL SCREW COVER ON THE Z AXIS BLOWING SYSTEM FOR RIDING ELEMENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET

Condition: used, mileage: 1,001 km, first registration: 01/2000, empty load weight: 2,790 kg, maximum load weight: 13,210 kg, overall weight: 16,000 kg, color: white, driver cabin: other, gearing type: other, loading space length: 7,250 mm, loading space width: 2,420 mm, loading space height: 2,350 mm, Year of construction: 2000, Vehicle location: Bovenden, rolling gate Body: Swap body with roller shutter, 2x PRESENT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhodpeua H Evofx Abzel - .

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT Lhedpfxeud N Hds Abzol  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100 Lhodpfxjuggb Dj Abzjl  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation Ledpfx Ajuwlzyebzohl

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) Lhodpfsu Nfttex Abzol 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). Lodpfx Aoibx S Nsbzohl St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Lhsdpoin Etzsfx Abzol Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Lsdpfx Asin Eztebzjhl CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Ledpfx Abein Uilezehl SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve Lhodpfx Abjb A S Hpozjl -Magnetic valve -Series: W402 -Weight: 0.9 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: JMVH-5-1/4-B -Solenoid valve -PN: 2-10 bar Ljdpsb A H Ewefx Abzjhl -Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Condition: good (used), Solenoid valves for block mounting, disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve Ljdpfxeb A H Hno Abzshl -Solenoid valve -Type: Thread mount: M18x1.5 mm -Number: 80 valves available -Price: per piece -Weight: 1.5 kg/piece

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: MOF H-3-1/4 -PN: 1.5-8 bar Price: per piece Ljdpjb A It Tsfx Abzehl -Quantity: 2 available -Weight: 0.3 kg

Condition: good (used), rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm Lhodpocnkwasfx Abzsl -Weight: 86 kg

Year of construction: 2022, condition: new, New Spare parts Rösler Roesler Turbine H42 Blade H42 99501010 G 300033085 Blade H32 99501035 300033354 Lsdpoctgubjfx Abzohl Blade H 28 99501015 300129471 Impeller 99505016 300129472 Control Gate 99505017 300129473 Rösler Strahlanlage NEW Spare parts for all Hurricane H42 H32 H28 Wurfschaufel H42 Impeller H42 / H32 H28 Verteiler H42 H32 H28 We can offert for spare Parts for Rösler, Shot Blasting Machines! Spare parts for Rösler Turbine H28 H32 H42

Year of construction: 2022, condition: new, New Spare parts Rösler Roesler Turbine H42 Blade H42 99501010 G 300033085 Blade H32 99501035 300033354 Blade H 28 99501015 300129471 Impeller 99505016 300129472 Control Gate 99505017 300129473 Rösler Strahlanlage Lhjdsctguispfx Abzsl NEW Spare parts for all Hurricane H42 H32 H28 Wurfschaufel H42 Impeller H42 / H32 H28 Verteiler H42 H32 H28 We can offert for spare Parts for Rösler, Shot Blasting Machines! Spareparts for Rösler Turbine H42 H32 H28

Condition: used, We offer a Möhringer root reducer in front of the gate TYPE 312 004 Hydraulic lifting and lowering of the frez Motor 55 kW/63 kW Lsdpfxjy Ecxts Abzjhl

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m Lhedpsyu Uriofx Abzol - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component -Manufacturer: Lapp, cable clamp 9 pieces -Type: Round 26-36 mm -Shipping/Price: complete -Dimensions: 140/65/H60 mm Lodpswqmvmefx Abzehl -Weight: 0.1 kg/piece

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley, rail clamp -Rail clamp -Type: Item No. 25549001B -Dimensions: see photos -Number: 6x terminal available Ljdpfx Abewq H H Ejzehl -Price: per piece -Dimensions: 170/170/H130 mm -Weight: 5.5 kg/pc.