Used 3 Bake Power Chuck for sale (63,304)

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump Fgsdpfxsd Rhdis Afieh -Hydraulic unit for: power chucks -with: trolley -Drive: Siemens 220/380 V 1.5 kW 1405 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1330/510/H1200 mm -Weight: 170 kg

Year of construction: 2025, condition: new, functionality: fully functional, Available in different sizes and capacities. Domino is a professional floor stove designed to meet the needs of simple and versatile use. It is ideal for baking bread, desserts and pizzas in the tray. The Domino series is especially suitable for bakeries, pastry shops, pizzerias and hotels. Basic characteristics: Baking temperature up to 350°C Height of the working floor: 18 cm (optional: 25 cm) 3 power levels available: STANDARD, MAXIMUM and TRAY PIZZA (on some models at an additional cost) New design suitable for blending into the interior Number of stackable floors: from 1 to 4 Fydrofire® Fireclay Plates Fydrofire® floor slabs provide greater reliability and even heat distribution Standard on all models. Control Panel & Software TOUCH electronic control "READY TO BAKE" function – the stove is ready for the set temperature with lower energy consumption "RECOVERY TIME" function – you always know how much time is left until the furnace is ready Access password management – guarantees consistency in baking by restricting access to recipes USB 2.0 port for fast and secure data transfer Energy Efficiency POWER MANAGEMENT: energy-saving mode for floors and steam generators, with 3 different modes according to the type of baking OPT display – shows the efficiency of the furnace use, enables conscious use and savings SLEEP function – to save during periods of inactivity Temperature control using two probes per floor Minimum insulation thickness: 100 mm Glass that reflects heat Steam generator (optional) with optimized performance and tuning from the panel Steam generator on/off button Automatic switching on and off by days and weeks Automatic shutdown in case of prolonged inactivity Display of time for conscious use of the stove Ready to connect to a power limiter device Construction Stainless steel front and hood Side panels made of prepainted sheet metal From the Squirrels, Squirrels, Squirrels Independent heater at each end of the floor Fgsdpfswhdpxox Afish Concrete and fireclay baking plate Lightweight aluminum frame for easy transport and installation Automatic control of the steam ejection damper Doors with upward opening – saves space Double Spring Doors Easy and quick cleaning of the glass without removing it Large stainless steel handle, insulated plastic handles for safe and ergonomic handling The internal dimensions of the floor correspond to the actual width of the opening Double lights per floor, with on/off switch Control panel on the right. Technical characteristics: Floor: 3 Floor entrance height: 18 cm Number of trays 60x40: 6 pieces per floor Floor dimensions width x depth: 124 x 122 cm Oven dimensions WxDxH: 163 x 161 x 241 cm Power: 13.6 kW per floor Weight: 185 kg one floor

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 Fgsded Itclepfx Afijh -Pitch: 1.5 mm -Weight: 38.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 Fgsdpfx Afed Itcrjioh -Pitch: 2.5 mm -Weight: 32 kg

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm Fgodsd S Nmispfx Afijh -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm Fgsdpodu Ud Ajfx Afieh -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min Fodpfx Afjc Skt Eoisgh -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm Fsdpfx Afed R Exfoijgh -Weight: 22.1 kg

Operating hours: 1,015 h, condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm -Dimensions: 1300/400/H820 mm -Weight: 270 kg Fsdpfx Ajfcw Twsfijgh

Condition: used, Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed Fgjdpfx Asd It H Rsfish -Feed size: Ø 250 mm -Weight: 35.5 kg

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks Fgjdpfx Ajdq Nftsfioh -Chuck size: Ø 250 mm -Rezess: Ø 230 mm -Hole circle: Ø 200 mm -Number: 2x available -Price: per piece -Weight: 35 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Fjdpjd R Hrdofx Afiegh -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 Fgjdpfxod Ira De Afish -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Beeks: soft -Chuck size: Ø 200 mm -Weight: 22 kg Fedpob A Rdzjfx Afisgh

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -without: interchangeable jaws Fsdpfx Aob A Smwefiogh -Chuck size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc Fgedpod E Tfpjfx Afioh -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg Fodpfed R Ew Tsx Afijgh

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm Fedpfxod A Hpws Afisgh -6 set: clamping jaws -Weight: 17.5 kg

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg Fedpsfpif Djfx Afisgh

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm Fgsdjd Tdz Hjpfx Afieh -DKRD Ø: 160 mm -Weight: 15.5 kg

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks Fedpfx Ajd R Exaofisgh -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Condition: like new (used), Hello, we offer here a used Erowa adapter pallet PowerChuck P automatic, pallet was only for demo purposes in use. Condition as new. ER-115304. shipping and inspection possible For questions we are happy to answer. Fgodpfxjlz Nb Ne Afish

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Fedsxd Um Rjpfx Afijgh Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT - OPTIMO machine - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 3 t, Equipment: safety light barrier, For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Fgodpfjvbd U Asx Afish Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Fsdpfewk Rlxjx Afijgh Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg