Used 2 Colour Press for sale (86,166)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Ppedjx Dnb Uspfx Aaljl Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2025, functionality: fully functional, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 Ppsdpfxox Sq Hls Aalsl - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Ppsdpfx Asxbyx Healsl Condition: As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm Ppedpoqa I Hnefx Aalsl -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,419 h, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, Equipment: documentation/manual, emergency stop, lower tooling, upper tooling, I am offering a GWF Mengele press brake HB60-17/20 here. Tool length: 2000 mm, 60t press force. The machine is well maintained but has been idle for about a year. Control: Cybelec V-DNC-1200/B. Year 2001 – 9419 operating hours. Includes hemming tool and press brake tool. Wila clamping system. Price is net ex location, plus applicable VAT. A mobile crane for loading can be arranged at short notice. Ppodpex T Dausfx Aalol

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) Psdpfxjq D Dzlj Aalopl - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled Ppjdpfx Ajuf Nr Aoalel - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation Ppodpox Haftefx Aalol

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition We don't sell spare parts nor have spare parts available! Ppodpfx Aju Nzypoalel *

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Ppodpfxjmnqkij Aaljl

Year of construction: 2005, condition: excellent (used), machine/vehicle number: AAC02761-0502-6018 REV 3, Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: Psdpfeh N Dwuex Aalspl - Dust extractor - Plate gumming device - Destacker - RIP

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. Ppedpex E Ea Hjfx Aaljl Application Types Stamping

Condition: like new (used), Year of construction: 2025, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C4070 colour production system. Item for sale: Ppodpfx Aaex Dhykelel 1 x Minolta AccurioPress C4070 with the following equipment: Includes Fiery Server Pro-32 Includes Paper Deck PF-707m Includes IQ-501 Stacker LS-507 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 293,140 pages Colour: Approx. 216,083 pages Black: Approx. 77,057 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, pressing force: 26 t, Baler ORWAK Compactor 3325 Pressing force: 26 tonnes / 260 kN Ppjdpfxsx Hfi Re Aalel Year of manufacture: 2023 Very good condition!

Condition: used, Year of construction: 1995, functionality: fully functional, Press platen (working area) 2500 mm × 1300 mm Maximum workpiece (panel) length 2500 mm Maximum workpiece width 1300 mm Workpiece thickness (typical operating range) min ~ 12 mm, max ~ 50 mm (for standard configuration) Total pressing force / pressure capacity up to ~ 90 tonnes (depending on configuration) Heating / Heating plates thermal-oil heated platens; working temperature up to ~ 120 °C (in heated-platen version) Ppedpfxjx Ezpwo Aalel Power supply / Installed power (some listings) earlier listing cites ~ 5.5 kW for cold-press version. 6 vertical cylinders (for platen pressure) in some full-spec versions.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke length: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-PURPOSE workshop / press Available in both 20 and 25 tons. BAR-MAN 20: 3,450 euros BAR-MAN 25: 3,990 euros The BAR-MAN can be used for a wide range of applications. Examples include maintenance work, cutting keyways, pressing bearings in and out, and much more. With this powerful machine, you can tackle almost any task, all while maintaining maximum operator comfort. Ppodpfx Ast A Dznealol

Condition: used, total width: 1,400 mm, total length: 2,900 mm, total height: 2,000 mm, Empty weight: 1.300 kg Cold Veneer Press Ppjdjwnhg Ispfx Aalel Italpresse Jolly/F Press surface 2500x1200mm Press opening 510mm 4 cylinders Total dimensions 2900x1400x2000mm (LxWxH), weight 1300kg - Documentation available: No - CE certificate present: No - Serial number: 1426 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1200 - Number of cylinders [pcs]: 4 - Transport dimensions: 2900mm x 1400mm x 2000mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Pedpfx Aasxwykuelopl Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, System: Used chamber filter press Type: Passavant Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Filter plate size: 1200x1200 Pedowqyf Iopfx Aalepl Number of plates: 59 plus head and end plate Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Podpfx Aswqyfhsaljpl Pump technology: optional Washing system: No Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: good (used), Manufacturer: MÜLLER Tip: SDZ 63t Psdpfjn D Eiasx Aalepl Table surface: 620x500mm Pressure: 63 t

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. Ppjdpfx Asfim Dwealol ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Condition: used, Technical data: Number of pistons: 4 Piston diameter: 45 mm Connection to central heating: NO Shelf dimensions: 2500x1200 mm Clearance: 460 mm Hydraulic pressing Motor power: 2 kW Psdpfx Ajxzrt Asalspl Power supply: 380 V Overall dimensions: Length: 2900 mm Width: 1370 mm Height: 2150 mm

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 90 mm Connection for central heating Shelf dimensions: 1300x3500 mm Clearance: 400 mm Hydraulic pressing Pneumatic side clamps Number of clamps: 9 Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 4200 mm Width: 1700 mm Height: 2350 mm Ppedpfxsxzdtnj Aalol

Condition: good (used), functionality: fully functional, load capacity: 125 kg, Hebelift lift2move 125 2 units available, each with 2 batteries Ppedoxyzwbjpfx Aalel