HL 15

MSM

Condition: new, Year of construction: 2026, Our belt haul-off can be built in different sizes. 40-80 m/min Ijdpfxjhd Ndxo Ahyeih Contact length 170mm to 800mm MADE in GERMANY

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring Iedpfx Asgn Edlohyeih

Year of construction: 2018, condition: used, Motan dryairtank LBA 400 – H-O-O-Z year: 2018 price: 3.450 € contact: Mr. Rainer Eckerle Ijdpfjtphhcsx Ahyoih

Condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm Iedpfjpz Sgfjx Ahyjih -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Chamber: 1st Pipe Diameter: Max 125mm Length: 6 meters Feed: electrically back and forth Iisdpfx Aheiidm Teyeh Year of construction: 2000 Material: stainless steel

Year of construction: 2017, condition: as good as new (ex-display), › ideal for all shirt fabrics (FX 1000) 1000mm belt › seperate feeding and transport belts, "cool feeding" › special insulation, little heat radiation › upper and lower heating individually controlled, with temperature limiters (1000 mm - 39 .37 inch long) › seperate heating zones selectable, TOP (shirt), BOTTOM (outerwear) › special speed-heat up function, for fast heating of the machine › touch screen for program storage and service functions › optional air and compression cooling Iedpfjpfa Nhex Ahyoih › failure diagnostic system

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Ijdeydp Abopfx Ahyjih

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) Iodpeg Iihwofx Ahyoih d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressing force: 200 t, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Iodpefxyi Dsfx Ahyoih Blessed plate folding by 180 degrees:14000 ?

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor -Type: SK 62-180 L/4 i 11.59 -Speed: 127 rpm -Engine: Nord Type SK 180 L / 4 -Power: 22.0 kW / 1450 rpm -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Dimensions: 1030/430/H425 mm Iijdpfx Ahot Ddd Ssyjh -Weight: 243 kg