Moulder

Moulder Wadkin GA220

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Laodpjyfgrpsfx Abzsg Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Ljdpfx Abjxfvp Aozoag Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, Laodpfx Abjzkmqzszeg trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. Ljdowfqh Aopfx Abzeag The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom Laodporg Exrofx Abzog 2nd shaft: right 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: new, Type DC-9052 Air delivery 4560 m³/h Inlet diameter 4x100 mm/ 1x180mm Fan diameter 356 mm Bag capacity 307 l Lodpfxsfiiwxj Abzoag Collector bag ø 480 × 4 3 phases 400V/50 Hz Motor power 5,6 kW Dimensions 2764x585x2355mm Transport dimensions 1600x720x840mm Weight 125 kg

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Lsdpodx Elmefx Abzjag Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Lajdpfx Ajzbrn Iobzeg Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. Ledpou S Afcofx Abzeag with IV 68 tool is still in operation ready for demonstration

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix manual clamp Saw blade 2 slitting discs Ledpfx Aboq Auzajzoag