CNC Turning- and Milling Center

MORI SEIKI NZ 2000 T2Y

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min Tjdpfozk U Rpsx Amyoa rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 Tjdot Rkcuspfx Amysa N°2 milling square heads N.2 Floor plate 6000x2000

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Tedpfx Aozd Su Eemyoa Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 810 mm, number of axes: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details. • Control/NC • Control unit: MORI SEIKI MSX-701 • NC system: FANUC FS-31iA (MAPPS 3); MAPPS version: 3 • Software/features: Load monitor; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electricals/destination • Voltage: 380–480 V; Frequency: 50 Hz; Destination: Europe • Machine configuration • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with live tooling • Lower turret live tooling currently NOT working (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Sub spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA Todpozbkh Tjfx Amysa • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Axis travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: Axes X-Y-Z; 16 stations; Milling function included; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Turret 2: Axes X-Y-Z; 16 stations; Milling function present but NOT working; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Backward tool max lengths: 155 mm (upper turret), 100 mm (lower turret) • Tool presetting • Spindle 1 in-machine tool presetter: Manual (detachable) • Spindle 2 in-machine tool presetter: Manual (detachable) • Coolant/chip (machine-integrated) • High-pressure coolant system: 635 W / 1040 W • Coolant type: Water-soluble • Through-spindle air blow: Included • Chip disposal direction: Right • Interfaces • Bar feeder interface: Included (Multiple-bar feeder specification; LNS) • Robot interface: Included • Languages/documentation • Manuals: Italian • Documentation: Installation, Operation, Maintenance manuals; Declaration of Conformity; CE Certificate • Important note • Lower turret motorized tooling function faulty on both machines. T2 turret currently usable only for turning operations. Additional equipment • Automation/handling • RR Robotica loading portal (included) • Loading pallets (included) • Work loader (Spindle 2 side) • Workpiece ejector • Work unloading conveyor • Part receiver • Custom upper door hatch for portal loading/unloading (non-original) • Chip/coolant peripherals • Drag-type chip conveyor • Coolant tank with washing pumps • Additional non-original 20 bar high-pressure pump • Workholding and tooling • Main spindle and sub spindle chucks included (KITAGAWA 8" hollow) • Fixed tool holders: 8 total (4 upper + 4 lower) • Driven tool holders: 2 axial, 2 radial • Electrical/other • External machine transformer • Signal light tower: 3-tier (red / milky white / green)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm Tedpfx Aedv I Abjmyja DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar - Year of manufacture: 2006 Tedpsv S Su Sofx Amyja

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAZAK QUICK TURN NEXUS 200-II MSY Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control system Mazatrol Matrix 2 - Hydraulic HAINBUCH chuck, combination type, size 65 for main spindle - Hydraulic HAINBUCH chuck, combination type, size 65 for counter spindle - Tool Eye - C-axis - C-axis counter spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder Todpfjzczd Uex Amyoa - Automatic parts catcher - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min Todpfxoyb S Rij Amyja relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 6000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] Tsdpfx Amox Tvkljyja EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: used, Year of construction: 1998, operating hours: 8,700 h, functionality: fully functional, The used DAEWOO Lynx 200B 2-axis CNC lathe is a robust and fast numerically controlled lathe with a slant bed and flat guides, compact in size. It is equipped with a FANUC 21-T CNC control unit with LCD monitor, year of manufacture 1998, and complies with CE standards. Main features: Max. swing over bed: 460 mm Todex Nqliepfx Amyja Max. turning diameter: 280 mm Max. turning length: 500 mm Max. bar capacity: 51 mm Spindle nose: ASA 6” Spindle: max. rotation speed 4,500 rpm Spindle motor power: 11 kW Turret: 10 positions Turning/boring tool size: 25×25 mm / Ø40 mm Tailstock: quill diameter 65 mm, quill stroke 80 mm – MT4 Machine weight: 3,500 kg The equipment includes the tailstock with programmable quill, tool presetting system, 3-jaw hydraulic chuck (which will be supplied in place of the manual chuck), and operating and maintenance manuals.