Monguzzi TRA3000

Monguzzi TRA3000

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Ibjdpsuc Idxofx Ap Hob Cutting system for thin panels

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Iodpfxjt Uduxs Ap Hjbb

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Isdpfx Asxlcufsp Hobb Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Ibjdsxfvp Aepfx Ap Hob Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year 2015. Available immediately. Ibedpfx Aeffk Etsp Hsb Repairs needed: Display, Energy power units for each two UV-units

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Ijdpfxjwng S Aj Ap Hebb Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1980, used, in excellent condition Manufacturer: Raimann Type: K 23 Year of manufacture: 1980 Engine power: 37 kW Track width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure comb / with 110 mm Feed rate: max. 8 - 35 min, infinitely adjustable Saw blade diameter: 360 mm x 80 mm bore Shaft diameter: 65 mm Workpiece length: min. 290/750 mm Dust extraction connection: D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Total connected load: approx. 75 A Ibodpfxjxuv Nuo Ap Hob Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected Without warranty

Year of construction: 2001, condition: good (used), functionality: fully functional, machine/vehicle number: 057, Length: 4.00 m Width: 4.20 m Ijdpfxexc Em Ej Ap Hsbb Height: 1.90 m Voltage: 380 V

Condition: used, Year of construction: 2000, Second-hand machine Isdpfx Apjzk N Sze Hobb Year of manufacture: 2000 Features and technical specifications: - with electric height and swivel adjustment for the Main saw blade, dimensions entered via keyboard - digital display of the swivel angle and cutting height - CE-compliant version - Cutting length 3000 mm - with centre and end-position locking – Cutting width 1300 mm - Fine adjustment on the rip fence – Maximum saw blade diameter 450 mm – Cutting height max. 150 mm - Cutting height at 45°: max. approx. 106 mm - 5.5 kW motor with 4 speeds: 3000/4000/5000/6000 rpm, manually adjustable - with automatic brake and digital speed display - 2-axis scoring unit with electric height and lateral adjustment – RAPIDO scoring system – DUPLEX double-sided mitre stop Availability: at short notice Storage location: 63934 Röllbach

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1234, input voltage: 380 V, input frequency: 50 Hz, Codix nailer fully rebuilt in Sophograf France 2 years ago. The machine is now setup to make doubleside stringpallets Ibjdpfov Hh Haex Ap Hob