Automatic bar lathe

Miyano ABX-64SY

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (132), manufacturer Miyano, model ABX-64SY, year 2011, control unit Fanuc, model 31i-Model A, main/sub-spindle, 2x 12-position turrets, bar feeder FMB Turbo 5-55, chip conveyor Yoshida. Dedpfeytd Rxsx Adajkk

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm Dsdsydaadepfx Adaekk X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Dkedpfxouz If No Adaek Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm Dkjdpfxewc Aqwj Adajk * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: ready for operation (used), Year of construction: 2010, operating hours: 46,476 h, spindle speed (max.): 8,000 rpm, controller manufacturer: MITSUBISHI, controller model: Meldas 635, number of axes: 12, This 12-axis Citizen M32V was manufactured in 2010, featuring a max machining diameter of 32mm and turning length of 320mm on both main and sub spindles. It includes a bar loader, LNS chip conveyor, high-pressure pump, and various accessories. If you are looking to get high-quality turning capabilities consider the Citizen M32V machine we have for sale. Contact us for more information about this machine. • Axis strokes: • X1: 108 mm • Z1: 325 mm • Y1: 275 mm • X2: 120.5 mm • Z2: 202 mm • Y2: 45 mm • X3: 235 mm • Z3: 410 mm • Main spindle: • Max. machining diameter: 32 mm • Max. turning length: 320 mm • Through-hole diameter: 36 mm • Sub spindle: • Max. machining diameter: 32 mm • Spindle speed: 7,000 rpm • Rotary tools: • Speed: 5,000 rpm • Number at vertical tool holder: 4 Dkjdpfx Aoyf Niwedaek • Stations at vertical tool holder: 10 Additional equipment • Bar loader • LNS chip conveyor • High-pressure pump • Holders and collet chuck (numerous accessories)

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm Dkedpfxovpaake Adajk diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen M32-2M3 CNC Swiss-type Turning Machine Year of manufacture: 2002 Control: Mitsubishi Meldas 635 Max machining diameter: 32 mm 7 controlled servo axes: X1/Z1/Y1/X2/Z2/X3/Z3 4 driven tools on the vertical holder C-axis: main and sub spindle Including accessories: FMB Turbo 5-42 bar feeder Extraction system Parts conveyor Dkedpfx Ajx Dncfsdask 5 driven tools for turret 5 standard holders (turning/boring holders) for turret - Available immediately -

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example Dedpfewzlcaox Adaokk - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour 280mmx350mm (X/Z) Measuring range Roughness 280mmx350mm (X/Z) Suitable range Ra Ra from 0.05µm* Suitable range Rz Rz from 0.5µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: ready for operation (used), Year of construction: 2005, spindle motor power: 3,700 W, spindle speed (max.): 15,000 rpm, overall weight: 1,950 kg, total height: 1,050 mm, number of axes: 4, This 4-axis Citizen K16 VIP swiss type turning machine was manufactured in 2005. It features a max machining diameter of 16 mm, with spindle speeds up to 15,000 rpm on the main spindle and 10,000 rpm on the sub-spindle. Ideal for precision work, it supports a variety of tooling options. A great opportunity to buy this Citizen K16 VIP swiss type turning machine. For more information about this swiss type turning machine, please reach out to us. Additional equipment • Turning tools: 5 • Drilling tools (front): 4 • End working tools (back): 4 • Tool holder, quill (diameter): 20 mm • Tool holder, turning tools (shank section): 12 mm Machine Benefits Technical Machine Benefits • High spindle speed, precision indexing, rapid traverse capabilities. Qualitative machine benefits: robust design, compact dimensions, stability during operations. • Input power: 8 kva Extra Information Dkjdpjx D N Ivefx Adaek Machine still under power Dimensions Machine Depth 1850 mm

Condition: used, Miyano BX26 Dksdpfx Ajxwlybodask