Millipore MpodPilot Enerpac Filtration System

Millipore MpodPilot

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Psdpjihh Spsfx Ahvogi Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter Pedpfx Asrai N Aohvegi - Control cabinet

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. Podpfx Ahevhctwovjgi The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 2023, functionality: fully functional, Rotor is a machine for spray cleaning and flood cleaning. The basket is inserted into the chamber manually or automatically. It is possible to adjust the rotation speed of the basket and the type of movement - full rotation or swiveling. Hot air drying is included in the basic model, but can be supplemented with vacuum drying. In this version, the system has two separate tanks, one for cleaning and one for rinsing. Data: Cleaning area 300 x 450 mm H 300 mm Load 50 kg Exterior dimensions: Width 140 cm Depth 220 cm Height 220 cm Loading weight 50 kg Capacity of tank 1 500 l Podpfxel Rbk Ro Ahvogi Tank 2 capacity 500 l Pump 1 1.5 kW 2.5 bar 200 l/min Pump 2 1.5 kW 2.5 bar 200 l/min Heating tank 1 16 kW Heating tank 2 16 kW Steam condenser 0.20 kW Tank emptying pump 0.37 kW Drying 7.5 kW Ultrasound (peak value/effective) 2 kW/ 1KWkW

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH Pgedpfx Aovf Ig Dohvsi (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window Pgjdpsf A D Nmjfx Ahvei - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Year of construction: 2002, condition: not inspected (used), Project number: 920239 Year of construction: 2002 Kettle: 280 litres, double jacket Heating: steam Weighing cells: Tedea-Huntleigh max 300kg Pump: Unibloc-PD displacement pump Flow meter: Endress + Hauser promass F Indicator: Ian Fellows LUCID-76711 Pgsdpfx Ahsl Tm R Iovei Recorder: Eurotherm Chessell paperless graphic recorder Measuring device: Knick Stratos 2401 Cond Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 1200 x 2000 mm

Year of construction: 2016, condition: ready for operation (used), Max. pressing force: 80kN, stroke: 180mm, power stroke: 12mm, weight: 760kg. Pedoifptyjpfx Ahvjgi

Year of construction: 2020, condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun, glue binder Pgodpfeygtnyex Ahvji -Manufacturer: Nordson, VersaBlue melting device with accessories -Type: VB_ENG -Pumps: 3 gear pumps -Accessories/individual components: see photos -Dimensions: 1070/760/H1380 mm -Total weight: 330 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 110 h, functionality: fully functional, type of input current: three-phase, overall weight: 3,500 kg, Coating and laminating system. For paper and film. Rewinding and unwinding with automatic web edge and web tension control. Laminating unit is cooled. Max. 30 m/min. Working width 650 mm. The machine was only used in the laboratory for tests. Only 110 operating hours since new Hotmelt or dispersion can be used. Hotmelt is melted in a separate extruder and fed to the application unit via a heated hose. Roll or reverse roll is possible. Powerful IR dryer . Exhaust air system and cooling unit can be included. Ma. Roll diameter 800 mm. Core 3 1/2 ". Pneumatic winding shafts. Psdort Iqbopfx Ahvegi