Boring Machine (Metal)

MICROCUT HBM-4

Condition: like new (used), Year of construction: 2017, operating hours: 784 h, functionality: fully functional, Controller Fanuc 31i Model B Spindel diameter 110 mm Table size 1250 x 1500 mm T slots in the table 22 mm / H8 x 150 mm x 7 Max. table load 5000 kgs Distance between the spindle nase and table surface 0 - 1600 mm (universal head) Distance between the spindle center and table surface 105 - 2250 mm (universal head) X travel 2200 mm Y travel 1600 mm Z travel 1600 mm W travel 550 mm (spindle feedrate) B axis 0,001 degree (stepless adjustable) Spindle speed 35 - 3000 rpm Tool holder type ISO50 . ATC magazin 60-fold Rapid speed on X / Y / Z / W axes 12 / 12 / 12 / 6 m/min. Feedrate on X / Y / Z / W Achsen 10 / 10 / 10 / 6 m/min. Spindle power 18,5/15 kW Torque 863 / 740 Nm Power required 400V, 50 Hz, 50 kVA Weight 21500 kgs Dimensions L x W x H = 7750 x 4715 x 3700 mm Accessories, features - Coolant unit Ksdpfxjttgzco Ag Asnd - ATC magazin - Coolant through spindle 20 bar - Chip conveyor - RENISHAW OMP60 Infra zero point presetter - Universal milling head - Clamping angles 2 pcs - Separated electrical cabinet - Manuals The machine can be found in almost new condition. It was barely used. Ready to buy immediately. Still under power in Hungary. The dismantling and loading are the buyer's cost.but we can help to customers in this job by ourself.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm Ksdpet Hwqqofx Ag Aond max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Knsdpfxet E Hvgj Ag Asd Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Kedpewdiu Esfx Ag Asnd Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system Ksdpevzhg Nefx Ag Asnd and workpiece magazine.

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Year of manufacture: 2017 Knodpexggktjfx Ag Asd Control: Fanuc 0i-TF Turning diameter: 376 mm Turning length: 1245 mm Main spindle: Belt-driven spindle Maximum spindle speed: 2800 rpm Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Knodpfx Aew Snqmsg Asd Welding strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 400 V. Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Operating instructions and packing included.

Condition: good (used), Year of construction: 2015, In very good condition. FANUC 31IB controller Knodsv Acphepfx Ag Asd

Condition: ready for operation (used), Year of construction: 2008, Fanuc 21ITB 16-tool changer BT50 Kodpfx Agswzyndo Asnd 1600 mm table, maximum rotation speed 250 rpm, maximum admissible weight 8000 kg maximum diameter 2000 mm, maximum machining height 1250 mm travel 250 x 250 mm, Z-axis travel 900 mm chip conveyor

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Knjdpfxoinh Rqs Ag Aod Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis