Tool and Cutter Grinder

Michael Deckel S11

Condition: ready for operation (used), Year of construction: 1990, functionality: not functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Djdpsyhxccsfx Ac Nsun

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Dedpfxewc Amxe Ac Noun Motor speeds: 1400-2800 Bar loader available!

Condition: good (used), functionality: fully functional, machine/vehicle number: S11-016, We are selling our Deckel S11. The machine is operational, and a digital readout can optionally be purchased as well. Dujdpfx Aow A Rrvec Non

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 Dusdpfxowxrfpj Ac Nen - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Djdjw T S Sqepfx Ac Noun Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: used, used Michael Deckel S11 - fully functional Dujdpfxex Hyn Io Ac Nsn

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: Dusdpfx Ajm E T Anec Nsn >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Dedsqzkdmepfx Ac Noun

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Dujdpfjqd N S Djx Ac Njn Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 2036, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, overall weight: 600 kg, rotational speed (min.): 2,000 rpm, rotational speed (max.): 10,000 rpm, table length: 500 mm, table width: 200 mm, power: 2 kW (2.72 HP), Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Machine number: 2036 - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 10 A - Connection: 2 kW - Grinding wheel diameter: max. 125 mm - Speed: 2,000–10,000 rpm - Table dimensions: 500 x 200 mm WORKING AREA & CAPACITY: - Indexing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Workpiece diameter between centers: 338 mm - Workpiece diameter, overhung: 600 mm - Distance between centers: 950 mm - Internal taper, indexing spindle: Morse 4 / Unified 40 - T-slots, machine base: 12 mm - T-slots, additional elements: 8 mm TRAVEL DISTANCES & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel, tool holder: 100 mm - Vertical adjustment, grinding head: 325 mm - Axial adjustment, grinding spindle: 5 mm - Tool holder: 230 mm - Grinding head mounting: 800 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting: 360° Dusdpfx Acjwxrf Nj Njn - Grinding heads: 360° - Tool holder: 360° - Universal device (horizontal/vertical): 360° OTHER FEATURES: - Spiral grinding/slotting lead: 0.80 mm - Maximum spiral sharpening length: 190 mm DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speeds: 4,000 / 8,000 rpm (pole switching) - Stepless DC: 2,000–10,000 rpm - Grinding wheel diameter: max. 125 mm - Cutter wheel diameter: max. 200 mm ACCESSORIES: - Includes two-axis digital readout - Extensive machine accessories included

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm Dusdpfxjwftdms Ac Nsn - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Dodpfx Asphvlasc Noun Mimu machine-tools (Italy)